Filter by
System of Measurement
For Use With
Actuation
Maximum Pressure @ Temperature
Valve Position
Connects To
Electrical Connection Type
Connection Location
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
Fitting Connection
Wire Connection
Solenoid Diverting Valves for Chemicals
 |  |
Often used for chemical analysis and other laboratory testing, these valves have a PTFE seal and body to withstand aggressive and corrosive solutions. All operate on electricity to automatically divert flow between ports. They do not require a pressure drop for operation. Any port can be used as an inlet or an outlet. Valves can direct flow from the inlet port to either outlet port. They cannot shut off flow. The actuator is mounted directly to the valve body to minimize movement and reduce wear.
Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Mounting Holes | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Thread Size | Diverting Valve Flow Pattern | Flow Coefficient (Cv) | Max. Pressure @ Temp. | Valve Type | Min. Pressure Drop Req. | Temp. Range, ° F | Actuation Time, sec. | Valve Lg. | Overall Ht. | Mounting Fasteners Included | No. of | Thread Size | For Use With | Seal Material | Each | |||
PTFE Body with Wire Leads—12V DC | |||||||||||||||||||
NPSM Female × NPSM Female × NPSM Female | |||||||||||||||||||
| 1/8 | — | L-Pattern | 15.85 | 30 psi @ 70° F | Solenoid, Zero Pressure Drop | None | 35 to 155 | 0.04 | 1 3/4" | 2" | No | 7 | 4-40 | Acetone, Air, Ammonia, Argon, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Helium, Hydrochloric Acid, Krypton, Methanol (Methyl Alcohol), Neon, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Salt Water, Sulfuric Acid, Water, Xenon, Xylene | PTFE | 2552N16 | 0000000 | ||
UNF Female × UNF Female × UNF Female | |||||||||||||||||||
| — | 1/4"-28 | L-Pattern | 10.57 | 30 psi @ 70° F | Solenoid, Zero Pressure Drop | None | 35 to 155 | 0.02 | 1 1/2" | 1 13/16" | No | 7 | 4-40 | Acetone, Air, Ammonia, Argon, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Helium, Hydrochloric Acid, Krypton, Methanol (Methyl Alcohol), Neon, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Salt Water, Sulfuric Acid, Water, Xenon, Xylene | PTFE | 2552N15 | 000000 | ||
| — | 10-32 | L-Pattern | 2.64 | 30 psi @ 70° F | Solenoid, Zero Pressure Drop | None | 35 to 155 | 0.02 | 3/4" | 1 3/16" | No | 5 | 2-56 | Acetone, Air, Ammonia, Argon, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Helium, Hydrochloric Acid, Krypton, Methanol (Methyl Alcohol), Neon, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Salt Water, Sulfuric Acid, Water, Xenon, Xylene | PTFE | 2552N14 | 000000 | ||
PTFE Body with Wire Leads—24V DC | |||||||||||||||||||
NPSM Female × NPSM Female × NPSM Female | |||||||||||||||||||
| 1/8 | — | L-Pattern | 15.85 | 30 psi @ 70° F | Solenoid, Zero Pressure Drop | None | 35 to 155 | 0.04 | 1 3/4" | 2" | No | 7 | 4-40 | Acetone, Air, Ammonia, Argon, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Helium, Hydrochloric Acid, Krypton, Methanol (Methyl Alcohol), Neon, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Salt Water, Sulfuric Acid, Water, Xenon, Xylene | PTFE | 2552N13 | 000000 | ||
UNF Female × UNF Female × UNF Female | |||||||||||||||||||
| — | 1/4"-28 | L-Pattern | 10.57 | 30 psi @ 70° F | Solenoid, Zero Pressure Drop | None | 35 to 155 | 0.02 | 1 1/2" | 1 13/16" | No | 7 | 4-40 | Acetone, Air, Ammonia, Argon, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Helium, Hydrochloric Acid, Krypton, Methanol (Methyl Alcohol), Neon, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Salt Water, Sulfuric Acid, Water, Xenon, Xylene | PTFE | 2552N12 | 000000 | ||
| — | 10-32 | L-Pattern | 2.64 | 30 psi @ 70° F | Solenoid, Zero Pressure Drop | None | 35 to 155 | 0.02 | 3/4" | 1 3/16" | No | 5 | 2-56 | Acetone, Air, Ammonia, Argon, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Helium, Hydrochloric Acid, Krypton, Methanol (Methyl Alcohol), Neon, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Salt Water, Sulfuric Acid, Water, Xenon, Xylene | PTFE | 2552N11 | 000000 | ||
Solenoid On/Off Valves for Fuel Oil
 |
Supply fuel oil to boilers, furnaces, and other heating equipment. These valves operate on electricity to automatically start and stop flow.
All are fail closed unless actuated. The actuator is directly mounted to the valve body to minimize movement and reduce wear. Valves meet NEMA 4X for resistance to washdowns, splashing water, corrosive liquid, and dust.
Zero Pressure Drop Valve—Zero pressure drop valve does not require a minimum pressure drop between the inlet and outlet for operation.
Pressure Drop Assisted Valve—Pressure drop assisted valve requires a minimum pressure drop between the inlet and the outlet for operation; the upstream pressure must be greater than the downstream pressure.
Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Pipe Size | Gender | Thread Type | Flow Coefficient (Cv) | Max. Pressure @ Temp. | Valve Type | Manual Override | Temp. Range, ° F | Valve Lg. | Overall Ht. | Fasteners Included | Enclosure Rating | Certification | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Brass Body with Wire Lead Connection | ||||||||||||||||
Fail Closed—120V AC | ||||||||||||||||
| 1/4 | Female | NPT | 0.76 | 300 psi @ 70° F | Pressure Drop Assisted, Solenoid | No | -10 to 180 | 2" | 3 1/2" | No | NEMA 4X | UL Listed, C-UL Listed | 47545K15 | 0000000 | ||
| 3/8 | Female | NPT | 4.4 | 230 psi @ 70° F | Zero Pressure Drop, Solenoid | No | -10 to 180 | 2 15/16" | 3 11/16" | No | NEMA 4X | UL Listed, C-UL Listed | 47545K16 | 000000 | ||
