About Actuated On/Off Valves
More
Compact Threaded Solenoid Diverting Valves
- For Use With: Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon
- Seal Material: Buna-N Rubber
Lower profile than other solenoid diverting valves and available in smaller pipe sizes, these are often used to automatically divert flow between ports in tight spots. They operate on electricity. All can direct flow from the side-port inlet to the side-port outlet or the top-port outlet. Valves cannot shut off flow. They don’t require a minimum pressure drop between the inlet and outlet for operation. The actuator is mounted directly to the valve body to minimize movement and reduce wear.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| Pipe Size  | Flow Pattern | Flow Coefficient (Cv) | Max. Pressure | Pressure Drop | Min. Pressure Drop Required | Max. Temp., °F | Actuation Time | Valve Lg. | O'all Ht. | Each | |
60V AC, 120V AC | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
430 Stainless Steel Body with Wire Leads | |||||||||||
NPT Female × NPT Female × NPT Female | |||||||||||
| 1/8 | L-Pattern | 0.17 | 125 psi @ 185° F | Zero Pressure Drop | None | 165° | 0 sec. | 1 5/8" | 3 11/16" | 0000000 | 0000000 |
| 1/4 | L-Pattern | 0.095 | 125 psi @ 185° F | Zero Pressure Drop | None | 165° | 0 sec. | 1 5/8" | 3 13/16" | 0000000 | 000000 |
| 1/4 | L-Pattern | 0.17 | 125 psi @ 185° F | Zero Pressure Drop | None | 165° | 0 sec. | 1 5/8" | 3 13/16" | 0000000 | 000000 |
24V DC | |||||||||||
430 Stainless Steel Body with Wire Leads | |||||||||||
NPT Female × NPT Female × NPT Female | |||||||||||
| 1/4 | L-Pattern | 0.095 | 125 psi @ 185° F | Zero Pressure Drop | None | 165° | 0 sec. | 1 5/8" | 3 13/16" | 0000000 | 000000 |
| 1/4 | L-Pattern | 0.17 | 125 psi @ 185° F | Zero Pressure Drop | None | 165° | 0 sec. | 1 5/8" | 3 13/16" | 0000000 | 000000 |
Solenoid Diverting Valves for Chemicals
- For Use With: Acetone, Air, Ammonia, Argon, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Helium, Hydrochloric Acid, Krypton, Methanol, Neon, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Salt Water, Sulfuric Acid, Water, Xenon, Xylene
- Seal Material: PTFE Plastic
Often used for chemical analysis and other laboratory testing, these valves have a PTFE seal and body to withstand aggressive and corrosive solutions. All operate on electricity to automatically divert flow between ports. They do not require a pressure drop for operation. Any port can be used as an inlet or an outlet. Valves can direct flow from the inlet port to either outlet port. They cannot shut off flow. The actuator is mounted directly to the valve body to minimize movement and reduce wear.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Thread Size | Flow Pattern | Flow Coefficient (Cv) | Max. Pressure | Pressure Drop | Min. Pressure Drop Required | Temp. Range, °F | Actuation Time | Valve Lg. | O'all Ht. | Mounting Fasteners Included | No. of | Thread Size | Each | |
PTFE Plastic Body with Wire Leads—12V DC | |||||||||||||||
NPSM Female × NPSM Female × NPSM Female | |||||||||||||||
| 1/8 | __ | L-Pattern | 15.85 | 30 psi @ 70° F | Zero Pressure Drop | None | 35° to 155° | 0.04 sec. | 1 3/4" | 2" | No | 7 | 4-40 | 0000000 | 0000000 |
UNF Female × UNF Female × UNF Female | |||||||||||||||
| __ | 1/4"-28 | L-Pattern | 10.57 | 30 psi @ 70° F | Zero Pressure Drop | None | 35° to 155° | 0.02 sec. | 1 1/2" | 1 13/16" | No | 7 | 4-40 | 0000000 | 000000 |
| __ | 10-32 | L-Pattern | 2.64 | 30 psi @ 70° F | Zero Pressure Drop | None | 35° to 155° | 0.02 sec. | 3/4" | 1 3/16" | No | 5 | 2-56 | 0000000 | 000000 |
PTFE Plastic Body with Wire Leads—24V DC | |||||||||||||||
NPSM Female × NPSM Female × NPSM Female | |||||||||||||||
| 1/8 | __ | L-Pattern | 15.85 | 30 psi @ 70° F | Zero Pressure Drop | None | 35° to 155° | 0.04 sec. | 1 3/4" | 2" | No | 7 | 4-40 | 0000000 | 000000 |
UNF Female × UNF Female × UNF Female | |||||||||||||||
| __ | 1/4"-28 | L-Pattern | 10.57 | 30 psi @ 70° F | Zero Pressure Drop | None | 35° to 155° | 0.02 sec. | 1 1/2" | 1 13/16" | No | 7 | 4-40 | 0000000 | 000000 |
| __ | 10-32 | L-Pattern | 2.64 | 30 psi @ 70° F | Zero Pressure Drop | None | 35° to 155° | 0.02 sec. | 3/4" | 1 3/16" | No | 5 | 2-56 | 0000000 | 000000 |