Filter by
System of Measurement
Valve Function
Shape
Voltage
Actuation
Body Material
Thread Type
Number of Ports
Fitting Connection
Valve Type
Maximum Pressure @ Temperature
Wire Connection
Maximum Temperature
Connects To
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
RoHS
Actuator Width
Duty Cycle
Electrical Connection Type
About Actuated On/Off Valves
More
Compact Threaded Solenoid Diverting Valves
- For Use With: Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon
- Seal Material: Buna-N Rubber
Lower profile than other solenoid diverting valves and available in smaller pipe sizes, these are often used to automatically divert flow between ports in tight spots. They operate on electricity. All can direct flow from the side-port inlet to the side-port outlet or the top-port outlet. Valves cannot shut off flow. They don’t require a minimum pressure drop between the inlet and outlet for operation. The actuator is mounted directly to the valve body to minimize movement and reduce wear.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
60V AC, 120V AC | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size  | Flow Pattern | Flow Coefficient (Cv) | Max. Pressure | Pressure Drop | Min. Pressure Drop Required | Max. Temp., °F | Actuation Time | Valve Lg. | O'all Ht. | Each | |
430 Stainless Steel Body with Wire Leads | |||||||||||
NPT Female × NPT Female × NPT Female | |||||||||||
| 1/8 | L-Pattern | 0.17 | 125 psi @ 185° F | Zero Pressure Drop | None | 165° | 0 sec. | 1 5/8" | 3 11/16" | 0000000 | 0000000 |
| 1/4 | L-Pattern | 0.095 | 125 psi @ 185° F | Zero Pressure Drop | None | 165° | 0 sec. | 1 5/8" | 3 13/16" | 0000000 | 000000 |
| 1/4 | L-Pattern | 0.17 | 125 psi @ 185° F | Zero Pressure Drop | None | 165° | 0 sec. | 1 5/8" | 3 13/16" | 0000000 | 000000 |