Nickel Plated Spacers | McMaster-Carr

Filter by

System of Measurement

Screw Size

Material

Washer Type

Overall Height

Thickness

Shaft Diameter

Countersink Angle

Height

Performance

Washer Designation

RoHS

REACH

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Shaft Type

Hardness

Width

Specifications Met

Maximum Pull

ASME Designation

Overall Width

Help me decide (beta)

94 Products

Finishing Washers

Flat and oval head screws sit flush within these washers for a neat, finished appearance.

Flanged Finishing Washers

Nickel-Plated Brass—Black-zinc- and nickel-plated brass washers are corrosion resistant in wet environments, nonmagnetic, and electrically conductive. They have a decorative finish.

	ID	OD	Overall Ht.	Countersink Angle	Pkg. Qty.		Pkg.
Nickel-Plated Brass



	No. 8	0.203"	0.625"	0.112"	82°	100	92922A211	000000


	No. 10	0.250"	0.688"	0.119"	82°	100	92922A212	00000

Other Finishing Washers

Image of Product. Front orientation. Finishing Washers.

Nickel-Plated Steel—Nickel-plated steel washers have excellent corrosion resistance and a decorative finish.

Nickel-Plated Brass—Black-zinc- and nickel-plated brass washers are corrosion resistant in wet environments, nonmagnetic, and electrically conductive. They have a decorative finish.

	ID	OD	Overall Ht.	Countersink Angle	Pkg. Qty.		Pkg.
Nickel-Plated Steel



	No. 4	0.125"	0.375"	0.103"	82°	100	90068A005	00000


	No. 6	0.160"	0.469"	0.102"	82°	100	90068A007	0000
	No. 8	0.180"	0.531"	0.120"	82°	100	90068A009	0000
	No. 10	0.235"	0.594"	0.122"	82°	100	90068A011	0000
	No. 12	0.259"	0.656"	0.156"	82°	100	90068A013	0000
	1/4"	0.305"	0.781"	0.160"	82°	100	90068A029	00000
	5/16"	0.391"	0.906"	0.188"	82°	50	90068A038	00000
	3/8"	0.500"	1.000"	0.260"	82°	25	90068A045	0000
	M3	3.2 mm	10.0 mm	1.8 mm	90°	5	92355A140	0000
	M5	5.3 mm	16.0 mm	2.8 mm	90°	5	92355A110	00000
	M6	6.4 mm	18.0 mm	3.3 mm	90°	5	92355A120	00000


	M8	8.4 mm	25.0 mm	4.8 mm	90°	5	92355A130	00000


	Nickel-Plated Brass



			No. 4	0.140"	0.375"	0.110"	82°	100	92922A005	0000


			No. 6	0.180"	0.438"	0.110"	82°	100	92922A007	0000
			No. 8	0.210"	0.531"	0.130"	82°	100	92922A009	00000
			No. 10	0.250"	0.594"	0.130"	82°	100	92922A011	00000
			No. 12	0.280"	0.688"	0.160"	82°	50	92922A013	0000
			1/4"	0.320"	0.781"	0.180"	82°	50	92922A029	00000
			5/16"	0.380"	0.891"	0.180"	82°	25	92922A034	00000
			3/8"	0.470"	1.125"	0.290"	82°	10	92922A035	00000
			M3	4.1 mm	9.0 mm	1.8 mm	90°	25	99435A500	0000
			M4	6.0 mm	13.0 mm	2.3 mm	90°	25	99435A600	00000
			M5	7.0 mm	15.0 mm	2.5 mm	90°	10	99435A650	0000


			M6	8.0 mm	16.0 mm	3.2 mm	90°	10	99435A700	0000

Magnetic Washers

Stick these washers to iron and steel surfaces, so they won't shift during installation. They take the pressure off screws and nuts to protect your mounting surface.

						Temp. Range
	For Screw Size	ID	OD	Thk.	Max. Pull, lbf	Min.	Max., ° F	Magnet Grade	Direction of Magnetization		Each
Nickel-Plated Neodymium



		No. 4	0.124"	0.302"	0.030" to 0.040"	1.1	Not Rated	140	N50	Through Thickness	90436A130	00000


		No. 6	0.154"	0.442"	0.040" to 0.050"	2	Not Rated	140	N50	Through Thickness	90436A140	0000
		No. 8	0.188"	0.438"	0.036" to 0.065"	2.5	Not Rated	140	N50	Through Thickness	90436A180	0000
		No. 10	0.219"	0.500"	0.036" to 0.065"	2.7	Not Rated	140	N50	Through Thickness	90436A190	0000
		1/4"	0.280"	0.900"	0.060" to 0.080"	5.4	Not Rated	140	N50	Through Thickness	90436A150	00000
		3/8"	0.406"	1.139"	0.070" to 0.090"	7.6	Not Rated	140	N50	Through Thickness	90436A160	00000
		1/2"	0.531"	1.250"	0.055" to 0.069"	7.2	Not Rated	140	N50	Through Thickness	90436A170	00000

Corrosion-Resistant Flanged Screw-Clamp Bushings

Made from stainless steel or plated with nickel, these bushings resist corrosion. A mounting flange prevents movement during tightening. As screw-clamp bushings, they're good for shock loads. When you tighten the clamping screws, the bushing's inner sleeve tightens onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear.

Nickel-Plated Steel—Nickel-plated steel bushings have good corrosion resistance in wet environments. However, the plating may begin to flake with long-term use.

	OD	Overall Wd.	Max. Torque, in·lbf	Fastener Tightening Torque, in·lbf	Includes		Each
Nickel-Plated Steel



	1/4"	1"	15/16"	60	10	Clamping Screws	5530N11	0000000


	3/8"	1 1/4"	1 1/8"	250	30	Clamping Screws	5530N12	000000
	1/2"	1 5/16"	1 1/8"	440	30	Clamping Screws	5530N13	000000
	5/8"	1 9/16"	1 5/16"	840	70	Clamping Screws	5530N14	000000
	3/4"	1 3/4"	1 5/16"	1,050	70	Clamping Screws	5530N15	000000
	7/8"	1 7/8"	1 1/2"	1,850	70	Clamping Screws	5530N16	000000
	1"	1 15/16"	1 1/2"	2,100	70	Clamping Screws	5530N17	000000
	12 mm	33 mm	28 mm	420	30	Clamping Screws	5530N18	000000
	14 mm	35 mm	28 mm	490	30	Clamping Screws	5530N19	000000
	16 mm	40 mm	34 mm	880	70	Clamping Screws	5530N21	000000
	19 mm	44 mm	34 mm	1,050	70	Clamping Screws	5530N22	000000


	20 mm	44 mm	34 mm	1,150	70	Clamping Screws	5530N23	000000
	22 mm	48 mm	38 mm	1,850	70	Clamping Screws	5530N24	000000
	25 mm	50 mm	38 mm	2,100	70	Clamping Screws	5530N25	000000
	30 mm	64 mm	45 mm	3,500	120	Clamping Screws	5530N26	000000
	35 mm	70 mm	49 mm	5,550	120	Clamping Screws	5530N27	000000
	40 mm	76 mm	49 mm	6,350	120	Clamping Screws	5530N28	000000

Corrosion-Resistant Flush-Mount Screw-Clamp Bushings

Insert these nickel-plated steel bushings into the bore of your sprocket for flush or recessed mounting in wet environments. When you tighten the included clamping screws on these bushings, their inner sleeve contracts onto the shaft and their outer sleeve expands to hold your sprocket, pulley, or gear. This keeps bushings from slipping during sudden starts and stops.

	OD, mm	Overall Wd., mm	Max. Torque, in·lbf	Fastener Tightening Torque, in·lbf	Includes		Each
Nickel-Plated Steel



	25	50	26	3,750	150	Clamping Screws	5515N11	0000000


	30	55	26	5,050	150	Clamping Screws	5515N12	000000
	35	60	26	7,050	150	Clamping Screws	5515N13	000000
	40	65	26	9,450	150	Clamping Screws	5515N14	000000
	45	75	32	15,900	360	Clamping Screws	5515N15	000000
	50	80	32	17,700	360	Clamping Screws	5515N16	000000
	55	85	32	22,700	360	Clamping Screws	5515N17	000000
	60	90	32	24,800	360	Clamping Screws	5515N18	000000

General Purpose Washers

Your go-to metal washer for every screw size. Washers take the pressure off nuts and screws to protect mounting surfaces.

Brass

Softer than most metals, brass washers won't damage other fastening components.

Nickel-Plated Brass—The nickel plating offers better corrosion resistance than plain brass to stand up to solvents, salt water, and chemicals. The plating can wear off over time, so these washers are not recommended for applications that experience a lot of friction or wear.

					Small Pack—Imported			Small Pack—United States Origin
	For Screw Size	ID	OD	Thk.	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
Nickel-Plated Brass



		No. 2	0.099"	0.188"	0.010" to 0.030"	100	92917A105	00000	—	———	0


		No. 4	0.120"	0.281"	0.018" to 0.032"	—	———	0	100	92917A110	00000
		No. 6	0.147"	0.312"	0.018" to 0.032"	—	———	0	100	92917A115	0000
		No. 8	0.172"	0.375"	0.025" to 0.039"	—	———	0	100	92917A125	0000
		No. 10	0.200"	0.438"	0.029" to 0.043"	—	———	0	100	92917A135	00000
		No. 12	0.228"	0.500"	0.030" to 0.050"	100	92917A146	00000	—	———	0
		1/4"	0.260"	0.562"	0.030" to 0.050"	—	———	0	100	92917A155	00000
		5/16"	0.340"	0.750"	0.052" to 0.072"	—	———	0	25	92917A185	00000
		3/8"	0.392"	0.875"	0.052" to 0.072"	—	———	0	25	92917A195	00000
		7/16"	0.500"	1.125"	0.071" to 0.091"	—	———	0	10	92917A205	00000
		M3	3.2 mm	7.0 mm	0.4 mm to 0.6 mm	—	———	0	50	98691A213	00000


		M4	4.3 mm	9.0 mm	0.4 mm to 0.6 mm	—	———	0	50	98691A214	00000
		M5	5.3 mm	10.0 mm	0.9 mm to 1.1 mm	—	———	0	50	98691A215	00000
		M6	6.4 mm	12.0 mm	1.4 mm to 1.8 mm	—	———	0	25	98691A216	00000
		M8	8.4 mm	16.0 mm	1.4 mm to 1.8 mm	—	———	0	25	98691A217	00000

SAE Washers

Originally designed for the automotive industry, these washers conform to SAE sizing standards. They generally have smaller diameters than USS washers to fit in cramped spots and are thinner to create more precise gaps. Washers distribute pressure under screws and nuts to protect your mounting surface.

Brass

Softer than most metals, brass washers won't damage other fastening components.

	ID	OD	Thk.	Pkg. Qty.		Pkg.
Nickel-Plated Brass



	No. 2	0.094"	0.250"	0.012" to 0.018"	100	90231A133	000000


	No. 4	0.125"	0.312"	0.025" to 0.040"	50	90231A135	00000
	No. 6	0.156"	0.375"	0.036" to 0.065"	50	90231A137	00000
	No. 10	0.219"	0.500"	0.036" to 0.065"	50	90231A139	00000
	No. 12	0.250"	0.562"	0.051" to 0.080"	25	90231A140	00000
	1/4"	0.281"	0.625"	0.051" to 0.080"	25	90231A141	00000
	5/16"	0.344"	0.688"	0.051" to 0.080"	10	90231A142	0000
	3/8"	0.406"	0.812"	0.051" to 0.080"	10	90231A143	0000
	7/16"	0.469"	0.922"	0.051" to 0.080"	10	90231A144	00000
	1/2"	0.531"	1.062"	0.074" to 0.121"	5	90231A145	00000
	3/4"	0.812"	1.500"	0.108" to 0.160"	1	90231A148	0000

USS Washers

These washers meet USS sizing specifications and typically have larger diameters than SAE washers. As a result, they accommodate larger screws and nuts and distribute pressure across a wider surface area. They are also thicker, so they withstand heavier loads and span wider gaps when used as spacers.

Brass

Softer than most metals, brass washers won't damage other fastening components.

	ID	OD	Thk.	Pkg. Qty.		Pkg.
Nickel-Plated Brass



	1/4"	0.313"	0.750"	0.051" to 0.080"	20	90463A101	000000

ASME Washers

Also known as Type B washers, these meet ASME sizing standards. They take the pressure off screws and nuts to protect your mounting surface.

Brass

Softer than most metals, brass washers won't damage other fastening components.

	ASME Designation	ID	OD	Thk.	Pkg. Qty.		Pkg.
Nickel-Plated Brass



	1/4"	Regular	0.281"	0.734"	0.056" to 0.071"	20	90474A184	000000


	5/16"	Narrow	0.340"	0.625"	0.052" to 0.072"	25	90474A182	00000
	3/8"	Narrow	0.406"	0.734"	0.056" to 0.071"	25	90474A183	00000

Oversized Washers

Cover oversized holes or use these washers as spacers and levelers. Compared to general purpose washers, these have a larger diameter or thickness.

Brass

Image of Product. Front orientation. Contains Annotated. Washers. Oversized Washers.

Image of Specification. Front orientation. Washers. Oversized Washers.

Softer than most metals, brass washers won't damage other fastening components.

	ID	OD	Thk.	Pkg. Qty.		Pkg.
Nickel-Plated Brass



	No. 6	0.147"	0.375"	0.025" to 0.039"	100	92917A120	00000


	No. 8	0.172"	0.438"	0.029" to 0.043"	100	92917A130	00000
	No. 10	0.200"	0.500"	0.033" to 0.047"	100	92917A140	00000
	1/4"	0.260"	0.688"	0.041" to 0.061"	50	92917A160	00000
	5/16"	0.340"	0.875"	0.052" to 0.072"	25	92917A190	00000
	3/8"	0.392"	1.000"	0.071" to 0.091"	10	92917A200	00000