About Washers
More
Metric General Purpose Washers
Use these metric washers to evenly distribute the load under bolt or screw heads and nuts when fastening. They can also act as spacers.
Stainless steel washers are more corrosion resistant than steel washers, and almost as strong. 18-8 and 17-7 PH stainless steel washers will hold up in humid, damp, and washdown environments, but will corrode if exposed to salt water or chemicals. 17-7 PH stainless steel washers are stronger than 18-8 stainless steel.
Washers that meet ISO 7089, 7090, 7091, and 7092 (formerly DIN 125, 126, and 433), meet international standards for fastener dimensions. The ISO 7091 washers have a slightly rougher surface than a typical flat washer.
For technical drawings and 3-D models, click on a part number.
| For Screw Size  | ID, mm | OD, mm | Thickness, mm | Hardness | Specifications Met | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| M64 | 66.0 | 115.0 | 8.0-10.0 | Rockwell B75 | DIN 125 | 1 | 000000000 | 000000 |
Wedge Lock Washers
These two-piece washers provide more locking power than split, tooth, and spring lock washers. Wedges on the inside lock the two pieces together, and serrations on the exterior grip surfaces to resist loosening from high vibration and shifting. Washers are reusable.
Zinc-flake-coated steel washers are corrosion resistant in wet environments.
316 stainless steel and zinc-flake-coated steel washers are comparable to NORD-LOCK® Series washers.
For technical drawings and 3-D models, click on a part number.
| For Screw Size | ID | OD | Thick. | Washer Type | Hardness | Pkg. Qty. | Pkg. | |
Zinc-Flake-Coated Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| 2 1/2", M64 | 2.640" | 3.740" | 0.270"-0.290" | Wedge Lock | Rockwell C46 | 1 | 000000000 | 000000 |