McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    39 Products

    Drilled Spanner Bits

    Use these bits to turn drilled-spanner screws. With two thin contact points, they can't deliver a lot of torque, so they may slip if you use too much force. Also known as pig-nose bits.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    For Screw
    Size
    For Hole
    Ctr.-to-Ctr.
    Overall
    Lg.
    Material
    Each
    For Hand Tools
    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Drilled Spanner Bits, For Hand Tools.

    Hex Shank

     
    1/4" Hex Shank Size
    No. 4
    		0.1"1"Steel0000000000000
    No. 6
    		0.134"1"Steel000000000000
    No. 8
    		0.164"1"Steel000000000000
    No. 10
    		0.198"1"Steel000000000000
    No. 12
    		0.215"1"Steel000000000000
    No. 14, 1/4"
    		0.259"1"Steel000000000000
     
    5/16" Hex Shank Size
    No. 6
    		0.162"1 1/4"Steel00000000000
    No. 8
    		0.186"1 1/4"Steel00000000000
    No. 10
    		0.209"1 1/4"Steel00000000000
    No. 12
    		0.223"1 1/4"Steel00000000000
    No. 14, 1/4"
    		0.25"1 1/2"Steel00000000000
     
    For Power Tools
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Drilled Spanner Bits, For Power Tools.

    Quick-Change Hex

    Shank

     
    1/4" Quick-Change Hex Shank Size
    No. 4
    		0.108"2"Steel00000000000
    No. 6
    		0.162"2"Steel00000000000
    No. 8
    		0.186"2"Steel00000000000
    No. 10
    		0.209"2"Steel00000000000
    No. 12
    		0.223"2"Steel00000000000
    No. 14
    		0.259"2"Steel00000000000
    No. 16
    		0.373"2"Steel00000000000
    No. 18
    		0.49"2"Steel000000000000
    No. 20
    		0.508"2"Steel000000000000
     

    Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Bit Sets, For Hand Tools.

    Hex Shank

    Have a range of bits ready to turn the most common screw styles and sizes.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    No. of
    Pieces
    Components Included
    Bits Included
    Adapters Included
    Drive Tools Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    381 Adapter
    1 Drive Tool
    36 Bits    		Drilled Spanner: No. 4, No. 6, No. 8, No. 10 (1" O'all Lg.)
    Phillips: No. 1 (1" O'all Lg.) - 1 ea.
    Phillips: No. 2 (1" O'all Lg.) - 2 ea.
    Pozidriv®: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 5/16"
    Square: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Tamper-Resistant Hex: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" (1" O'all Lg.)
    Tamper-Resistant Torx: T8, T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)
    Torq-Set®: No. 6, No. 8, No. 10 (1" O'all Lg.)
    Tri-Wing®: No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)    		1/4" Hex Drive Adapter3 1/2" Lg. Ratchet WrenchSteelPlastic Case000000000000
    391 Drive Tool
    2 Adapters
    36 Bits    		Drilled Spanner: No. 4, No. 6, No. 8, No. 10 (1" O'all Lg.)
    Phillips: No. 1, No. 2 (1" O'all Lg.)
    Pozidriv®: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 1/4", 5/16" (1" O'all Lg.)
    Square: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Tamper-Resistant Hex: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" (1" O'all Lg.)
    Tamper-Resistant Torx: T8, T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)
    Torq-Set®: No. 6, No. 8, No. 10 (1" O'all Lg.)
    Tri-Wing®: No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)    		1/4" Female Square Drive × 1/4" Female Hex Adapter
    2 1/4" Lg. Bit Adapter for Power Tools    		Screwdriver HandleSteelPlastic Case000000000000
    1004 Adapters
    96 Bits    		Drilled Spanner: No. 4, No. 6, No. 8, No. 10, No. 12, 1/4" (1" O'all Lg.)—1 ea.
    Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" (1" O'all Lg.)—1 ea.
    Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm (1" O'all Lg.)—1 ea.
    Phillips: No. 0 (1" O'all Lg.)—1 ea.
    Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea.
    Phillips: No. 2 (1" O'all Lg.)—4 ea.
    Pozidriv®: No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea.
    Screw-In Hook Driver Bit—1 ea.
    Slotted: 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 3/8" (1" O'all Lg.)—1 ea.
    Square: No. 0, No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)—1 ea.
    Tamper-Resistant Hex (Inch): 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16" (1" O'all Lg.)—1 ea.
    Tamper-Resistant Hex (Metric): 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)—1 ea.
    Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)—1 ea.
    Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40, T45, T50, T55 (1" O'all Lg.)—1 ea.    		1/4" Male Square Drive × 1/4" Hex Shank Adapter (1" O'all Lg.)
    1/4" Male Square Drive × 1/4" Hex Shank Adapter (2" O'all Lg.)
    2 1/2" Lg. Bit Adapter for Power Tools
    Bit Adapter for Square Drive Tools    		—SteelPlastic Case00000000000
     

    Bit Screwdrivers

    Image of Product. Cushion Grip. Front orientation. Screwdrivers. Bit Screwdrivers, Magnet Bit Holder, Cushion Grip.

    Cushion Grip

    Don't lug around a toolbox full of drivers—just swap out the bit to drive multiple screw sizes and styles with one tool. The ultimate space savers, these bit screwdrivers are a smart solution for on-the-go jobs.
    Corrosion-Resistant Stainless Steel—With solid stainless steel construction, these screwdrivers have no coating that could flake off and damage the screw drive. They resist salt water and chemicals better than steel screwdrivers, but are not quite as strong.
    Cushion Grip—Made of soft plastic to make gripping and squeezing the handle more comfortable.
    Shaft
    Bit
    No. of
    Sizes
    Sizes Included
    For Bit Hex
    Shank Size
    Overall
    Lg.
    Material
    Lg.
    Overall
    Wd.
    Material
    Holding
    Mechanism
    Grip
    Style
    Each
    26Drilled Spanner: No. 4, No. 6, No. 8, No. 10
    Tamper-Resistant Hex: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 2 mm, 2.5 mm, 3 mm, 5 mm
    Tamper-Resistant Torx: T7, T8, T10, T15, T20, T25, T27, T30, T40
    Torq-Set®: No. 6, No. 8, No. 10    		1/4"8 1/2"Stainless Steel3 3/8"5/16"SteelMagnetCushion0000000000000

    Screwdrivers

    Image of Product. Plain Grip. Front orientation. Screwdrivers. Screwdrivers, Plain Grip.

    Plain Grip

    A staple in any toolbox, these are your go-to screwdrivers for routine maintenance and repair.
    Plain Grip—Made of hard plastic for durability.
    Steel—Best for dry environments, since moisture will cause it to rust.
    Shaft
    For Screw
    Size
    Overall
    Lg.
    Lg.
    Overall
    Wd.
    Material
    Each
    Drilled Spanner
     
    Plain Grip
    No. 4
    		8"4"1/4"Steel000000000000000
    No. 6
    		8"4"1/4"Steel00000000000000
    No. 8
    		8"4"1/4"Steel00000000000000
    No. 10
    		8"4"1/4"Steel00000000000000
    No. 12
    		8"4"1/4"Steel00000000000000
    No. 14
    		8"4"5/16"Steel00000000000000
     

    Drilled Spanner Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Drilled Spanner Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Drilled Spanner Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change

    Hex Shank

    The bits in these sets turn drilled-spanner screws. With two thin contact points, they can't deliver a lot of torque, so they may slip if you use too much force. Also known as pig-nose bits.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    6 BitsDrilled Spanner for 0.134" Ctr.-to-Ctr.: No. 6 (1" O'all Lg.)—2 ea.
    Drilled Spanner for 0.164" Ctr.-to-Ctr.: No. 8 (1" O'all Lg.)—2 ea.
    Drilled Spanner for 0.198" Ctr.-to-Ctr.: No. 10 (1" O'all Lg.)—2 ea.    		SteelPlastic Pouch00000000000000
     
    5/16" Hex Shank Size
    7 BitsDrilled Spanner for 0.162" Ctr.-to-Ctr.: No. 6 (1 1/4" O'all Lg.)—2 ea.
    Drilled Spanner for 0.186" Ctr.-to-Ctr.: No. 8 (1 1/4" O'all Lg.)—2 ea.
    Drilled Spanner for 0.209" Ctr.-to-Ctr.: No. 10 (1 1/4" O'all Lg.)—2 ea.
    Drilled Spanner for 0.223" Ctr.-to-Ctr.: No. 12 (1 1/4" O'all Lg.)—1 ea.    		SteelPlastic Pouch000000000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    4 BitsDrilled Spanner for 0.108" Ctr.-to-Ctr.: No. 4 (2" O'all Lg.)—1 ea.
    Drilled Spanner for 0.162" Ctr.-to-Ctr.: No. 6 (2" O'all Lg.)—1 ea.
    Drilled Spanner for 0.186" Ctr.-to-Ctr.: No. 8 (2" O'all Lg.)—1 ea.
    Drilled Spanner for 0.209" Ctr.-to-Ctr.: No. 10 (2" O'all Lg.)—1 ea.    		SteelPlastic Pouch000000000000
     

    Screwdriver Sets

    Image of Product. Front orientation. Screwdrivers. Screwdriver Sets, Plain Grip.

    Plain Grip

    Keep a selection of screwdrivers on hand to turn fasteners of any size
    Steel—Best for dry environments, since moisture will cause it to rust.
    Plain Grip—Made of hard plastic for durability.
    No. of
    Pieces
    Includes
    Material
    Grip
    Style
    Container
    Type
    Each
    Drilled Spanner
    3Drilled Spanner Screw Remover for No. 6 (1/8" Ctr.-to-Ctr.)—8" O'all Lg.
    Drilled Spanner Screw Remover for No. 8 (5/32" Ctr.-to-Ctr.)—8" O'all Lg.
    Drilled Spanner Screw Remover for No. 10 (3/16" Ctr.-to-Ctr.)—8" O'all Lg.    		SteelPlainPlastic Pouch000000000000000
    4Drilled Spanner Screw Remover for No. 6 (1/8" Ctr.-to-Ctr.)—8" O'all Lg.
    Drilled Spanner Screw Remover for No. 8 (5/32" Ctr.-to-Ctr.)—8" O'all Lg.
    Drilled Spanner Screw Remover for No. 10 (3/16" Ctr.-to-Ctr.)—8" O'all Lg.
    Drilled Spanner Screw Remover for No. 14 (7/32" Ctr.-to-Ctr.)—8" O'all Lg.    		SteelPlain—00000000000000
     

    Combination Fire Hose/Hydrant Wrenches

    Image of Product. 1 Spanner Head. Front orientation. Fire Hose and Hydrant Wrenches. Combination Fire Hose/Hydrant Wrenches, 1 Spanner Head.
    Image of Product. Front orientation. Fire Hose and Hydrant Wrenches. Combination Fire Hose/Hydrant Wrenches, 2 Spanner Heads.

    1 Spanner Head

    2 Spanner Heads

    Turn the lugs on fire hose fittings and the fasteners on hydrants.
    Box Wrench
    Spanner Wrench
    No. of Spanner
    Heads
    For Use With
    External
    Square Max. Size
    External 5-Point
    Max. Size
    For Use With
    For Hose
    Size
    For Lug
    Style
    Style
    Overall
    Lg.
    Material
    Grip Material
    Each
    1Fire Hydrants1 1/4"1 3/4"Fire Hose Fittings3/4 to 6Pin, RockerHook18 1/2"Powder-Coated IronChrome-Plated Steel0000000000000
    2Fire Hydrants1 1/2"1 7/8"Fire Hose Fittings3/4 to 6Pin, RockerHook19 1/2"Powder-Coated IronChrome-Plated Steel000000000000

    Fire Hose Wrenches

    Image of Product. Front orientation. Fire Hose and Hydrant Wrenches. Fire Hose Wrenches, Style A.
    Image of Product. Front orientation. Fire Hose and Hydrant Wrenches. Fire Hose Wrenches, Style B.

    Style A

    Style B

    A spanner-style head fits the lugs on fire hose couplings and adapters.
    Style
    For Hose
    Size
    Overall
    Lg.
    Features
    For Lug
    Style
    Material
    Each
    A3/4 to 610"1 13/16" Lg. × 7/16" Ht. Slot for Gas Valve Shut-OffRocker, PinAluminum0000000000000
    B3/4 to 610 1/2"1 13/16" Lg. × 7/16" Ht. Slot for Gas Valve Shut-Off, 1 1/2" Wd. Pry Tip at End of HandleRocker, PinAluminum000000000000
    back to top