Filter by
Capacity
Wand Material
Tank Material
Seal Material
Spray Head Color
Export Control Classification Number (ECCN)
Clarity
DFARS Specialty Metals
Label Type
Mouth OD
Performance
Spray Head Material
Plastic Hand-Pump Sprayers
 |  |
Style A | Style B |
 |  |
Style C | Style F |
Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. Made of lightweight plastic, the tank on these sprayers resists chemicals and impact. They’re often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides.
Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.
Warning: Face the nozzle away from you to safely release pressure from the relief valve. If there’s no relief valve, place the tank on its side with the top pointed away from you before you release.
Cone Dispensing—Sprayers with a cone nozzle are good for everyday cleaning.
Flat Dispensing—The flat nozzle is useful for creating powerful coverage over a wide area.
Mist Dispensing—To clean delicate equipment or cool machinery, use the mist nozzle.
Stream Dispensing—Remove stuck-on material with the stream nozzle.
Viton® Fluoroelastomer Seal—Viton® fluoroelastomer seals are chemical resistant, so you can spray oils, acids, and solvents without damaging the seal.
Polypropylene—Polypropylene wands resist most chemicals. They are lighter than stainless steel but are less durable.
Aluminum—Aluminum wands are durable but can corrode when exposed to strong chemicals.
Internal Pressure Regulator—Sprayers with an internal pressure regulator keep pressure at or below 55 psi.
Pressure-Relief Valve—Sprayers with a pressure-relief valve let you release the air inside safely without being sprayed.
Repair Kits—Add a repair kit to replace worn or damaged components, such as the check valve or O-rings.
Sprayers | Repair Kits | Replacement Trigger and Wand Kits | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Cap., gal. | Dia. | Ht. | Tank Material | Seal Material | Wand Material | Color | Hose Lg. | Wand Lg. | Fill Opening Dia. | Graduations | Features | Includes | Each | Each | Each | |||||
Cone/Stream Dispensing | |||||||||||||||||||||
| A | 1 | 7" | 15 1/2" | Polyethylene | Buna-N | Polypropylene | White | 40" | 12" | 4 5/8" | 1/2 gal. 1 gal. 2 L 4 L | Continuous Spray, Internal Pressure Regulator, Reinforced Hose | — | 6878N319 | 000000 | 6878N317 | 000000 | 6878N912 | 000000 | ||
| A | 1 | 7 1/2" | 16" | Polyethylene | Buna-N | Aluminum | White | 36" | 15" | 2" | 1/2 gal. 1 gal. 1 L | Continuous Spray, Reinforced Hose | — | 6878N347 | 00000 | 6878N343 | 0000 | 6878N916 | 0000 | ||
Mist/Stream Dispensing | |||||||||||||||||||||
| B | 1 | 6 11/16" | 16 1/4" | Polyethylene | Buna-N | Polypropylene | White | 36" | 14" | 1 3/4" | — | Continuous Spray, Filter, Pressure-Relief Valve, Reinforced Hose | — | 6878N328 | 00000 | ——— | 0 | ——— | 0 | ||
Cone/Flat/Stream Dispensing | |||||||||||||||||||||
| A | 1 | 7 1/4" | 15 1/2" | Polyethylene | Viton® Fluoroelastomer | Polypropylene | White | 40" | 18" | 4 1/2" | 1/2 gal. 1 gal. 2 L 4 L | Continuous Spray, Internal Pressure Regulator, Reinforced Hose | — | 6878N318 | 00000 | 6878N316 | 00000 | 6878N911 | 00000 | ||
| A | 1 | 8 1/2" | 16 1/2" | Polyethylene | Buna-N | Polypropylene | White | 36" | 14" | 2" | 1/2 gal. 1 gal. 1 L | Continuous Spray, Filter | Spray Shield | 6878N346 | 00000 | 6878N343 | 0000 | 6878N921 | 0000 | ||
Cone/Mist/Stream Dispensing | |||||||||||||||||||||
| A | 1 | 7 1/2" | 15" | Polyethylene | Buna-N | Polypropylene | White | 34" | 12" | 2" | 1/2 gal. 2 L | Continuous Spray, Filter, Pressure-Relief Valve, Wand Holder | — | 6878N14 | 00000 | 6878N101 | 00000 | 6878N104 | 00000 | ||
| F | 1 | 7" | 13 1/2" | Polyethylene | Buna-N | Polypropylene | White | 34" | 12" | 3" | 1/2 gal. 2 L | Continuous Spray, Extended Handle, Filter, Pressure-Relief Valve, Reinforced Hose, Wand Holder | — | 6878N17 | 00000 | 6878N101 | 00000 | 6878N104 | 00000 | ||
Flat/Mist/Stream Dispensing | |||||||||||||||||||||
| C | 1 | 7" | 18 1/2" | Polyethylene | Viton® Fluoroelastomer | Polypropylene | White | 50" | 15" | 2" | — | Carrying Handle, Continuous Spray, Filter, Pressure-Relief Valve, Reinforced Hose | Shoulder Strap | 6878N325 | 00000 | ——— | 0 | ——— | 0 | ||
Long-Reach Spray Bottles
Heavy Duty Plastic Hand-Pump Sprayers
 |
These sprayers have a more durable construction than our other plastic hand-pump sprayers. They have a large fill opening for easy filling and cleaning. Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. They are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides. They have a trigger that can be locked for continuous spray.
Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.
Replacement Trigger and Wand Kits—Replacement trigger and wand kits do not include nozzles.
Sprayers | Repair Kits | Replacement Trigger and Wand Kits | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., gal. | Dia. | Ht. | Tank Material | Seal Material | Wand Material | Clarity | Color | Hose Lg. | Wand Lg. | Fill Opening Dia. | Each | Each | Each | |||||
Cone/Mist/Stream Dispensing | ||||||||||||||||||
| 1 | 7 3/4" | 15 1/2" | Polyethylene | Viton® Fluoroelastomer | Polypropylene | Semi-Clear | White | 48" | 16" | 4" | 7095T12 | 000000 | 7095T14 | 00000 | 7095T13 | 000000 | ||
