The spray is deflected at a steep angle to produce a low-impact, extra-wide spray.

These nozzles have replaceable tips that are removable with a quarter-turn.

A check valve prevents the nozzle from dripping when it is turned off. Spray tips can be removed for cleaning and replacement.

A low flow rate makes these nozzles good for distributing fluids, cooling, washing, and rinsing.

Drill a hole anywhere along a pipe and snap on these nozzles. Spray tips can be quickly and easily removed for cleaning and replacement.

With a unique spiral design, these nozzles produce high flow rates and are clog-resistant.

The large square coverage area makes these nozzles a good choice for chemical processing as well as for cooling applications.

A wide spray angle provides a larger coverage area and produces a finer, more atomized spray than full-cone nozzles.

Create small, atomized spray droplets for cooling, moistening, and humidifying applications. These nozzles have a check valve that prevents dripping when they’re turned off

A wide spray angle provides a larger coverage area and produces a finer, more atomized spray than full-cone nozzles.

With a unique spiral tip, these nozzles produce high flow rates and are clog-resistant.

These nozzles produce a concentrated stream for more effective cleaning than stationary nozzles.

These nozzles produce a concentrated stream for more effective cleaning than stationary nozzles.

Spray a precise, concentrated, high-velocity stream longer distances than flat spray nozzles to handle tough cleaning applications.

The superior cleaning ability of a solid stream has been combined with rotating spray action for excellent coverage.

These nozzles produce a flat, thin spray pattern.

No need to switch between nozzles—push these nozzles in and pull them out to change their pressure level, and twist their cover to adjust the spray angle between 0° and 40°. Their quick-disconnect hose connection makes attaching and removing them easy.

Spray a precise, concentrated, high-velocity stream longer distances than flat spray nozzles to handle tough cleaning applications.

These durable wash guns are typically used for frequent washdowns and cleanup.

Use these guns to clean as well as apply chemicals and solvents.

The powerful combination of air and water creates a high-velocity, atomized spray without needing high pressure. These guns also can be used to siphon.

With a high maximum pressure and quick-disconnect nozzle connection, these wash guns work with pressure washers and high-pressure spray systems and it’s easy to swap out their nozzles.

Connect these cleaners to existing steam lines to remove dirt, grease, and heavy oils from most surfaces.

Combine the power of steam and detergent—siphon detergent from a drum and use the control panel to regulate the steam/detergent mixture and change the temperature and flow rate.

Also known as air-shield and safety-shield nozzles, a center airstream blows away debris while an outer air curtain deflects flying chips and dust.

Control consumption and noise by adjusting the airflow.

The extra length allows access into hard-to-reach areas.

These nozzles are made of FDA-listed materials.

These needle-style nozzles force air to a precise pinpoint.

Blow air backward to clean out the inside of pipes, tubes, and channels without pushing debris into your system.

The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.

Choose a base, hose, and nozzle for a custom setup.

Shaped to fit into extremely tight spaces, these nozzles can be used to remove parts from molds. Tap the wedge into position, attach the nozzle to a blowgun, and activate the airflow to release the part.

Blow debris and sweep it away with the built-in brush.

The lightweight plastic construction makes these blowguns more comfortable to hold than metal.

Designed to reduce noise, these blowguns are quieter than similar standard guns.

Compact enough to carry with you, these guns have a built-in quick-disconnect hose coupling for easy connection to an air line.

Operate a blowgun without disconnecting your air tool—these guns fit between the tool and air hose. Good for blowing away debris after using an air-powered sander or grinder.

The extra length lets you access hard-to-reach areas.

Designed to reduce noise, these blowguns are quieter than similar standard guns.

Increase your reach with the telescoping nozzle.

These blowguns provide more than two times the airflow of standard guns.

Air flows out of the side of the nozzle to clean air filters, radiators, and inside recesses.

The flat nozzle distributes air over a wide area.

Clear dust and debris, test air ducts for leaks, and dry large surfaces without needing a compressed air line.

A nonconductive plastic nozzle and tip protect against accidental contact with live electrical circuits. These blowguns are tested to 1,000 volts to meet IEC 60900.

Bend the stand's flexible arm to position your gun and keep it in place. Use the included foot pedal to activate airflow and static elimination.

Blow off dust and contamination, eliminate static charges, and guard against ESD (electrostatic discharge).

Create a sheet of high-velocity air.

Producing the same airflow as standard air knives, these are quieter and use 18% less compressed air.

Dry and cool parts, wipe conveyor belts, control coating depth, and blow liquid, chips, and dust off of equipment in sanitary environments.

These produce the same airflow as standard static-eliminating air knives but are quieter and use 15% less compressed air.

Create a wide airflow that’s good for drying and stripping paint.

Concentrate a heat gun's airflow.

Shaped to hold round objects, use these nozzles for installing heat-shrink tubing and bending plastic pipe.

Kits contain lengths of hose, nozzles, valves, and caps.

Build a custom 3/4" system to deliver coolant, cutting oil, water, or air in any direction.

Use with Snap-Loc hose to assemble and disassemble components.

These nozzles handle coolant pressure up to 150 psi.

Use as a lever to adjust the angle of coolant streams.

These nozzles handle coolant pressure up to 150 psi.

These dispensers have a reservoir and controls for coolant flow.

These dispensers have a reservoir for recirculating coolant.

Replace messy mist coolant dispensers—these convert compressed air into a stream of cold air. They can be used in applications where liquid coolant can't.

There’s no shut-off valve on these nozzles, so water instantly flows.

Attach these chucks to your air hose so you can connect the hose to Schrader valves.

Nozzles allow you to control the flow while dispensing hydraulic fluid.

These nozzles let you adjust the flow while dispensing gasoline. They are also known as service-station-style nozzles.

Often used in low-noise environments such as labs and clean rooms, these are quieter than standard enclosure-cooling vortex tubes.

These NEMA-rated vortex tube are designed to keep water out during washdowns.

Set the thermostat and these vortex tubes switch on only when needed.

Quietly cool electronics inside enclosures while keeping out rain, snow, splashing water, and dirt.

Quietly cool electronics inside enclosures to your desired temperature while keeping out rain, snow, splashing water, and dirt.

Kits include one vortex tube for converting compressed air into a stream of cold air as well as airflow adjusters, a cold-air muffler, a tube fitting, and tubing.