Filter by
System of Measurement
Capacity
For Use With
Tank Material
Wand Material
Seal Material
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Clarity
Maximum Pressure
Thread Type
Plastic Hand-Pump Sprayers
 |  |
Style A | Style B |
 |  |
Style C | Style F |
Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. Made of lightweight plastic, the tank on these sprayers resists chemicals and impact. They’re often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides.
Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.
Warning: Face the nozzle away from you to safely release pressure from the relief valve. If there’s no relief valve, place the tank on its side with the top pointed away from you before you release.
Cone Dispensing—Sprayers with a cone nozzle are good for everyday cleaning.
Flat Dispensing—The flat nozzle is useful for creating powerful coverage over a wide area.
Mist Dispensing—To clean delicate equipment or cool machinery, use the mist nozzle.
Stream Dispensing—Remove stuck-on material with the stream nozzle.
Viton® Fluoroelastomer Seal—Viton® fluoroelastomer seals are chemical resistant, so you can spray oils, acids, and solvents without damaging the seal.
Polypropylene—Polypropylene wands resist most chemicals. They are lighter than stainless steel but are less durable.
Aluminum—Aluminum wands are durable but can corrode when exposed to strong chemicals.
Internal Pressure Regulator—Sprayers with an internal pressure regulator keep pressure at or below 55 psi.
Pressure-Relief Valve—Sprayers with a pressure-relief valve let you release the air inside safely without being sprayed.
Repair Kits—Add a repair kit to replace worn or damaged components, such as the check valve or O-rings.
Sprayers | Repair Kits | Replacement Trigger and Wand Kits | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Cap., gal. | Dia. | Ht. | Tank Material | Seal Material | Wand Material | Color | Hose Lg. | Wand Lg. | Fill Opening Dia. | Graduations | Features | Includes | Each | Each | Each | |||||
Cone/Stream Dispensing | |||||||||||||||||||||
| A | 1 | 7" | 15 1/2" | Polyethylene | Buna-N | Polypropylene | White | 40" | 12" | 4 5/8" | 1/2 gal. 1 gal. 2 L 4 L | Continuous Spray, Internal Pressure Regulator, Reinforced Hose | Shoulder Strap | 6878N319 | 000000 | 6878N317 | 000000 | 6878N912 | 000000 | ||
| A | 1 | 7 1/2" | 16" | Polyethylene | Buna-N | Aluminum | White | 36" | 15" | 2" | 1/2 gal. 1 gal. 1 L | Continuous Spray, Reinforced Hose | — | 6878N347 | 00000 | 6878N343 | 0000 | 6878N916 | 0000 | ||
Mist/Stream Dispensing | |||||||||||||||||||||
| B | 1 | 6 11/16" | 16 1/4" | Polyethylene | Buna-N | Polypropylene | White | 36" | 14" | 1 3/4" | — | Continuous Spray, Filter, Pressure-Relief Valve, Reinforced Hose | — | 6878N328 | 00000 | ——— | 0 | ——— | 0 | ||
Cone/Flat/Stream Dispensing | |||||||||||||||||||||
| A | 1 | 7 1/4" | 15 1/2" | Polyethylene | Viton® Fluoroelastomer | Polypropylene | White | 40" | 18" | 4 1/2" | 1/2 gal. 1 gal. 2 L 4 L | Continuous Spray, Internal Pressure Regulator, Reinforced Hose | Shoulder Strap | 6878N318 | 00000 | 6878N316 | 00000 | 6878N911 | 00000 | ||
| A | 1 | 8 1/2" | 16 1/2" | Polyethylene | Buna-N | Polypropylene | White | 36" | 14" | 2" | 1/2 gal. 1 gal. 1 L | Continuous Spray, Filter | Spray Shield | 6878N346 | 00000 | 6878N343 | 0000 | 6878N921 | 0000 | ||
Cone/Mist/Stream Dispensing | |||||||||||||||||||||
| F | 1 | 7" | 13 1/2" | Polyethylene | Buna-N | Polypropylene | White | 34" | 12" | 3" | 1/2 gal. 2 L | Continuous Spray, Extended Handle, Filter, Pressure-Relief Valve, Reinforced Hose, Wand Holder | — | 6878N17 | 00000 | 6878N101 | 00000 | 6878N104 | 00000 | ||
Flat/Mist/Stream Dispensing | |||||||||||||||||||||
| C | 1 | 7" | 18 1/2" | Polyethylene | Viton® Fluoroelastomer | Polypropylene | White | 50" | 15" | 2" | — | Carrying Handle, Continuous Spray, Filter, Pressure-Relief Valve, Reinforced Hose | Shoulder Strap | 6878N325 | 00000 | ——— | 0 | ——— | 0 | ||
Heavy Duty Plastic Hand-Pump Sprayers
 |
These sprayers have a more durable construction than our other plastic hand-pump sprayers. They have a large fill opening for easy filling and cleaning. Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. They are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides. They have a trigger that can be locked for continuous spray.
Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.
Replacement Trigger and Wand Kits—Replacement trigger and wand kits do not include nozzles.
Long-Reach Spray Bottles
Mist Coolant Dispensers with Reservoir
 |  |  |  |
Style C | Style D | Style E | Style F |
Coolant Outlet | Nozzle | Reservoir | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Cap., gal. | Flow Rate @ Pressure | Max. Pressure, psi | No. of | Hose Lg., ft. | Hose Material | Lg. | Type | Material | Overall Ht. | Wd. | Dp. | Dia. | Reservoir Material | For Max. SSU Viscosity Grade, SSU | Air Inlet Pressure, psi | Each | |||
For Use With Coolant and Water | ||||||||||||||||||||
| C | 1 | 0.2 gph @ 100 psi | 100 | 1 | 5 | Brass | 6" | Rigid | Brass | 12 1/4" | 10" | 5 1/4" | — | Polyethylene | 35 | 50 to 100 | 1324K86 | 0000000 | ||
| C | 1 | 0.3 gph @ 100 psi | 100 | 2 | 5 | Brass | 6" | Rigid | Brass | 12 1/4" | 10" | 5 1/4" | — | Polyethylene | 35 | 50 to 100 | 1324K34 | 000000 | ||
| D | 1 | 6 gph @ 125 psi | 125 | 1 | 4 | Nylon | 6" | Rigid | Brass | 10 3/4" | 7 3/4" | 3 1/2" | — | Stainless Steel | Not Rated | 30 to 120 | 1131K14 | 000000 | ||
| D | 1 | 6 gph @ 125 psi | 125 | 2 | 4 | Nylon | 6" | Rigid | Brass | 10 3/4" | 7 3/4" | 3 1/2" | — | Stainless Steel | Not Rated | 30 to 120 | 1131K18 | 000000 | ||
| E | 1 | 6 gph @ 125 psi | 125 | 1 | 4 | Nylon | 12" | Flexible | Acetal | 10 3/4" | 7 3/4" | 3 1/2" | — | Stainless Steel | Not Rated | 30 to 120 | 1131K16 | 000000 | ||
For Use With Coolant, Water, and Cutting Oil | ||||||||||||||||||||
| F | 1 | Not Rated | 120 | 1 | 4 | Polyethylene | 12" | Flexible | PVC | 12" | — | — | 7" | Steel | 30 | 30 to 125 | 1199K31 | 000000 | ||
| F | 1 | Not Rated | 120 | 2 | 4 | Polyethylene | 12" | Flexible | PVC | 12" | — | — | 7" | Steel | 30 | 30 to 125 | 1199K32 | 000000 | ||
Flood Coolant Dispensers with Reservoir
 |
Style A |
These dispensers have a reservoir for recirculating coolant. They provide a constant flow of coolant, so they dissipate heat more efficiently than mist and droplet dispensers, making them suitable for cooling long machine cycles. Coolant strainers prevent debris from getting into the recirculated coolant.
Maximum flow rate and shut-off height are for water-soluble oil.
Shut-Off Height—Shut-off height is the maximum height to which the water-soluble oil can be pumped.
Coolant Outlet | Nozzle | Reservoir | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Cap., gal. | Max. Flow Rate @ ft. of Head | Max. Pressure, psi | No. of | Hose Lg., ft. | Hose Material | Lg. | Type | Material | Overall Ht. | Wd. | Dp. | Reservoir Material | Shut-Off Ht., ft. | For Max. SSU Viscosity Grade, SSU | Voltage, V AC | Features | Each | |||
For Use With Coolant and Water | |||||||||||||||||||||
| A | 1 | 108 gph @ 1 ft. | 5 | 1 | 6 | Vinyl Plastic | 6" | Rigid | Polyethylene | 9 3/8" | 12" | 6" | Polypropylene | 11.5 | 100 | 120 | Adjustable Flow, Coolant Strainer | 43085K21 | 0000000 | ||
