Small-Capacity Air-Powered Sprayers



Spray thin liquids evenly with just one hand. These compact sprayers don’t need propellant—fill them and pressurize with air.
Aluminum sprayers weigh less and are more corrosion resistant than steel sprayers, but they’re not as strong.
Steel sprayers are stronger than aluminum sprayers, but they’re heavier. They have a scratch-resistant powder coating that helps prevent corrosion from chemicals and moisture.
PTFE seals handle a broader range of chemicals than Viton® seals. They’re also more wear resistant.
Sprayers with a pressure-relief valve let you release the air inside, so you can open them safely without being sprayed. Face the valve away from you, then slowly turn it counterclockwise until you hear air escape.
Plastic pitchers (sold separately) have a nozzle that fits into the sprayer opening. A removable brass filter strains out foreign particles.
Sprayers | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Air Inlet | Repair Kits | ||||||||||||||
Cap., fl. oz. | Dispensing Type | Dia. | Ht. | Seal Material | Color | Pressure Range, psi | Thread Size | Thread Type | Gender | Features | Each | Each | |||
For Use With Oil and Solvents | |||||||||||||||
Powder-Coated Steel | |||||||||||||||
B | 32 | Mist, Stream | 4" | 8" | PTFE Plastic | Red | 80-145 | 0.305"-32 | Schrader | Male | __ | 0000000 | 000000 | 0000000 | 000000 |
C | 32 | Mist, Stream | 4" | 8" | PTFE Plastic | Green | 80-145 | 0.305"-32 | Schrader | Male | Pressure-Relief Valve | 00000000 | 00000 | 0000000 | 00000 |
For Use With Water-Based Liquids, Oil, and Solvents | |||||||||||||||
Painted Aluminum | |||||||||||||||
D | 24 | Mist, Stream | 3 1/2" | 11" | PTFE Plastic | Black | 80-145 | 0.305"-32 | Schrader | Male | __ | 00000000 | 00000 | 0000000 | 00000 |
Nickel-Plated Aluminum | |||||||||||||||
D | 24 | Mist, Stream | 3 1/2" | 11" | PTFE Plastic | __ | 80-145 | 0.305"-32 | Schrader | Male | __ | 00000000 | 00000 | 0000000 | 00000 |
32-fl. oz. Plastic Pitcher | 0000000 | Each | 000000 |
Air-Powered Wash Guns for Chemicals and Solvents




Use these guns to clean as well as apply chemicals and solvents.
Stainless steel nozzles are corrosion resistant.
Style A should be used with cold liquids only. Do not use in air-only mode.
Styles B-D have a rubber hose that is oil resistant. You can remove the hose to operate in air-only mode. The hose on Style D is heavy duty and reinforced.
Pressure, psi | |||||||||
---|---|---|---|---|---|---|---|---|---|
Style | Body Material | Nozzle Lg. | Airflow | Max. Siphon Flow Rate, gpm | Min. | Max. | Max. Temp. | Each | |
1/4 NPT Female Inlet Connection | |||||||||
Brass Nozzle | |||||||||
A | Aluminum | 12" | 9 cfm @ 100 psi | 0.3 | Not Rated | 150 | Not Rated | 00000000 | 000000 |
B | Nickel-Plated Brass | 6 1/4" | 11 cfm @ 80 psi | 0.2 | 35 | 175 | 140° F | 000000 | 000000 |
C | Nickel-Plated Brass | 9 3/4" | 11 cfm @ 80 psi | 0.2 | 35 | 175 | 140° F | 000000 | 000000 |
D | Brass | 2 1/4" | 16 cfm @ 80 psi | 0.5 | 35 | 175 | 140° F | 000000 | 000000 |
Stainless Steel Nozzle | |||||||||
B | Nickel-Plated Brass | 6 1/4" | 11 cfm @ 80 psi | 0.2 | 35 | 175 | 140° F | 0000000 | 000000 |
C | Nickel-Plated Brass | 9 3/4" | 11 cfm @ 80 psi | 0.2 | 35 | 175 | 140° F | 0000000 | 000000 |
3/8 NPT Female Inlet Connection | |||||||||
Brass Nozzle | |||||||||
B | Nickel-Plated Brass | 6 1/4" | 11 cfm @ 80 psi | 0.2 | 35 | 175 | 140° F | 000000 | 000000 |
C | Nickel-Plated Brass | 9 3/4" | 11 cfm @ 80 psi | 0.2 | 35 | 175 | 140° F | 000000 | 000000 |
D | Brass | 2 1/4" | 16 cfm @ 80 psi | 0.5 | 35 | 175 | 140° F | 000000 | 000000 |
Stainless Steel Nozzle | |||||||||
B | Nickel-Plated Brass | 6 1/4" | 11 cfm @ 80 psi | 0.2 | 35 | 175 | 140° F | 0000000 | 000000 |
C | Nickel-Plated Brass | 9 3/4" | 11 cfm @ 80 psi | 0.2 | 35 | 175 | 140° F | 0000000 | 000000 |
1/2 NPT Female Inlet Connection | |||||||||
Brass Nozzle | |||||||||
B | Nickel-Plated Brass | 6 1/4" | 11 cfm @ 80 psi | 0.2 | 35 | 175 | 140° F | 000000 | 000000 |
C | Nickel-Plated Brass | 9 3/4" | 11 cfm @ 80 psi | 0.2 | 35 | 175 | 140° F | 000000 | 000000 |
D | Brass | 2 1/4" | 16 cfm @ 80 psi | 0.5 | 35 | 175 | 140° F | 000000 | 000000 |
Stainless Steel Nozzle | |||||||||
B | Nickel-Plated Brass | 6 1/4" | 11 cfm @ 80 psi | 0.2 | 35 | 175 | 140° F | 0000000 | 000000 |
C | Nickel-Plated Brass | 9 3/4" | 11 cfm @ 80 psi | 0.2 | 35 | 175 | 140° F | 0000000 | 000000 |