We will reply to your message within an hour.
Rollers have a standard 1.9" diameter to fit most roller conveyors.
These rollers have diameters 1 3/8" and below.
Rollers have diameters between 2" and 4".
Choose the width you need from 6" to 60" in 1/16" increments.
These rollers have diameters 1 3/4" and below.
All stainless steel construction makes these rollers suitable for washdown applications. They have 2 1/2" diameters.
Made from stainless steel, these rollers are suitable for washdown applications. They have a standard 1.9" diameter to fit most roller conveyors.
Rollers have maintenance-free, precision bearings to reduce conveyor noise.
These rollers have 0.78" diameters.
Rollers are made from thick, 12-ga. steel so they're less likely to dent than standard 16-ga. rollers.
Improve tracking on curved conveyor sections. Rollers taper so packages maintain their orientation through the curve.
Rollers move in one direction so they won't roll back when idle, keeping packages in place.
We'll get the between frame width and groove spacing you need in 1/16" increments.
Rollers are grooved to accommodate round belts on line-shaft conveyors.
Rollers are tapered for use on curved conveyor sections.
Connect to other rollers with two grooves to power a gravity conveyor or build a custom powered conveyor.
We'll get the between frame width and sprocket spacing you need in 1/16" increments.
Replace rollers on a chain-driven conveyor.
Use with a lathe and mandrel to coil round and flat wire into springs.
Mount these casters to the side of equipment or on gates and doors. They are spring‐loaded for good shock absorption.
Minimize shock to your load on bumpy surfaces with these spring-loaded casters.
The springs in these casters take on bumpy surfaces and obstructions while preventing shock to the load.
Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.