McMaster-Carr logo
    Filter by
    System of Measurement
    Length
    Attribute Image
    DFARS Specialty Metals
    Industrial Info Compare
    Extended Length @ Maximum Load
    Attribute Image
    Compression Spring Type
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Minimum Load
    Steel Grade
    Hook Type
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    53 Products

    Compression Springs

    Image of Product. Front orientation. Compression Springs.
    Squeeze these springs and they’ll push right back to their original length. When compressed, they apply steady pressure to keep components securely in place. Release the pressure and they snap back instantly, just like the tip of a ballpoint pen.
    Spring Steel—Strong and resilient, but best suited for dry environments since moisture will cause these springs to rust.
    Corrosion-Resistant 302 Stainless Steel—Won’t corrode from exposure to moisture and mild chemicals, including ammonia often found in cleaning solutions. These springs are easier to compress than steel, but can’t handle as high a load.
    Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant stainless steel springs won't degrade when exposed to salt water and harsh chemicals. They're easier to compress than steel, but can’t handle as high a load.
    Lg.,
    mm
    OD,
    mm
    ID,
    mm
    Wire Dia.,
    mm
    Compressed Lg. @
    Max. Load, mm
    Max. Load,
    lb.
    Spring Rate,
    lbf/mm
    End Type
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Spring Steel
    2011.258.751.2512.3131.6Closed and GroundDIN 2095, DIN 2098, DIN 172235000000000000000
    201510.62.213.9497.3Closed and GroundDIN 2095, DIN 17223500000000000000
     
    Corrosion-Resistant 302 Stainless Steel
    204.633.370.6311.33.20.38ClosedDIN 209550000000000000
    206.85.80.561.20.09ClosedDIN 209550000000000000
    2010.89.20.86.92.80.22ClosedDIN 209550000000000000
    2011.258.751.257.7161.3Closed and GroundDIN 209550000000000000
    201510.62.212.9486.1Closed and GroundDIN 209520000000000000
     
    Highly Corrosion-Resistant 316 Stainless Steel
    2021.40.3140.60.11Closed—1000000000000
    2021.50.2512.40.30.05Closed—1000000000000
    202.51.90.312.20.50.07Closed—1000000000000
    2032.40.310.70.40.05Closed—1000000000000
    2032.50.259.50.20.02Closed—1000000000000
    204.633.370.6313.22.50.38Closed and Ground—1000000000000
    206.85.80.59.20.90.08Closed and Ground—1000000000000
    2010.89.20.89.52.30.22Closed and Ground—1000000000000
    2011.258.751.2713.98.21.4Closed and Ground—1000000000000
     

    Extension Springs

    Image of Product. Front orientation. Extension Springs. Hook End.

    Hook End

    The farther you stretch these springs, the harder they pull to bring the two ends back together. They're commonly used to tension cable, return an air cylinder to its starting point, or hold a door closed.
    Hook End—Hook into closed holes, such as hanger bolt eyes. These springs work best when kept under tension, as they're more likely to slip off than loop-end springs when tension is released. Also known as machine hook ends.
    Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant stainless steel springs won't degrade when exposed to salt water and harsh chemicals. They're easier to extend than steel, but can’t handle as high a load.
    Minimum Load—The amount of force required to start extending the spring.
    Maximum Load—The amount of force required to fully extend the spring.
    Load,
    lb.
    Lg.,
    mm
    OD,
    mm
    Wire Dia.,
    mm
    Extended Lg.
    @ Max. Load, mm
    Min.
    Max.
    Spring Rate,
    lbf/mm
    Pkg.
    Qty.
    Pkg.
    Hook End
     
    Highly Corrosion-Resistant 316 Stainless Steel
    2040.376.330.060.610.00950000000000000
     

    Slotted Spring Pins

    Image of Product. Front orientation. Spring Pins. Slotted Spring Pins.
    Image of Product. End View. Side1 orientation. Spring Pins. Slotted Spring Pins.

    End View

    Squeeze these pins into holes and they expand slightly, creating tension to hold parts in place. They are often used as hinge pins and as fasteners for springs and power transmission components. An alternative to dowel pins, they're lighter in weight with a hollow center and don’t need a precise hole. Also known as roll pins.
    Spring Steel—These pins won't deform from stress and vibration. Although they're stronger than stainless steel, they're best for dry environments since moisture will cause them to rust.
    Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these pins resist rusting. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.
    Lg.,
    mm
    For Hole
    Dia., mm
    Wall Thk.,
    mm
    Double Shear Breaking
    Strength, lbf
    Min.
    Hardness
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Spring Steel
     
    2 mm Diameter
    2020.2330Rockwell C42DIN 7346, ISO 1333710000000000000000
    202 to 2.10.4600Rockwell C42ISO 875210000000000000000
     
    2.5 mm Diameter
    202.50.25530Rockwell C42DIN 7346, ISO 133375000000000000000
    202.5 to 2.60.5950Rockwell C42ISO 875210000000000000000
     
    3 mm Diameter
    203 to 3.10.61,400Rockwell C42ISO 875220000000000000000
     
    3.5 mm Diameter
    203.5 to 3.650.82,000Rockwell C42ISO 875210000000000000000
     
    4 mm Diameter
    2040.51,700Rockwell C42DIN 7346, ISO 13337500000000000000
    204 to 4.20.82,500Rockwell C42ISO 875210000000000000000
     
    5 mm Diameter
    2050.52,300Rockwell C42DIN 7346, ISO 133375000000000000000
    205 to 5.213,900Rockwell C42ISO 875210000000000000000
     
    6 mm Diameter
    2060.754,000Rockwell C42DIN 7346, ISO 13337250000000000000
    206 to 6.21.25,800Rockwell C42ISO 875210000000000000000
     
    8 mm Diameter
    2080.755,300Rockwell C42DIN 7346, ISO 133372500000000000000
     
    10 mm Diameter
    201015,300Rockwell C42DIN 7346, ISO 13337100000000000000
     
    12 mm Diameter
    2012110,700Rockwell C42DIN 7346, ISO 13337100000000000000
     
    13 mm Diameter
    20131.214,800Rockwell C42DIN 7346, ISO 13337500000000000000
     
    16 mm Diameter
    20161.522,000Rockwell C42DIN 7346, ISO 13337500000000000000
     
    Corrosion-Resistant 18-8 Stainless Steel
     
    2 mm Diameter
    202 to 2.10.4Not RatedNot RatedDIN 1481, ISO 8752250000000000000
     
    2.5 mm Diameter
    202.5 to 2.60.5Not RatedNot RatedDIN 1481, ISO 8752250000000000000
     
    3 mm Diameter
    203 to 3.10.6Not RatedNot RatedDIN 1481, ISO 8752100000000000000
     
    3.5 mm Diameter
    203.5 to 3.60.7Not RatedNot RatedISO 8752500000000000000
     
    4 mm Diameter
    204 to 4.20.8Not RatedNot RatedDIN 1481, ISO 8752100000000000000
     
    5 mm Diameter
    205 to 5.21Not RatedNot RatedDIN 1481, ISO 8752100000000000000
     
    6 mm Diameter
    206 to 6.21.2Not RatedNot RatedDIN 1481, ISO 8752100000000000000
     

    Coiled Spring Pins

    Image of Product. Front orientation. Spring Pins. Coiled Spring Pins.
    Image of Product. End View. Side1 orientation. Spring Pins. Coiled Spring Pins.

    End View

    The best spring pins for joining parts exposed to vibration and shock. They're often used in power transmission, automation, and other assemblies with constant motion and sudden starts and stops. Because of their spiral shape, they flex to conform to holes that aren’t perfectly round.
    Spring Steel—These pins won't deform from stress and vibration. Although they're stronger than stainless steel, they're best for dry environments since moisture will cause them to rust.
    Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these pins resist rusting. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.
    Lg.,
    mm
    For Hole
    Dia., mm
    Double Shear Breaking
    Strength, lbf
    Min.
    Hardness
    Specs. Met
    Pkg.
    Qty.
    Pkg.
    Spring Steel
     
    2.5 mm Diameter
    202.500 to 2.600850Rockwell C43DIN 7343, ISO 875050000000000000000
     
    3 mm Diameter
    203.000 to 3.1001,200Rockwell C43DIN 7343, ISO 8750250000000000000
     
    3.5 mm Diameter
    203.500 to 3.6001,600Rockwell C43ASME B18.8.3M, DIN 7343, ISO 87502500000000000000
     
    4 mm Diameter
    204.000 to 4.2002,100Rockwell C41DIN 7343, ISO 8750250000000000000
     
    5 mm Diameter
    205.000 to 5.1003,300Rockwell C43DIN 7343, ISO 87502500000000000000
     
    6 mm Diameter
    206.000 to 6.1004,900Rockwell C43DIN 7343, ISO 87502500000000000000
     
    8 mm Diameter
    208.000 to 8.3008,700Rockwell C41DIN 7343, ISO 87501000000000000000
     
    Corrosion-Resistant 18-8 Stainless Steel
     
    2.5 mm Diameter
    202.500 to 2.600650Not RatedDIN 7343, ISO 8750100000000000000
     
    3 mm Diameter
    203.000 to 3.100900Not RatedDIN 7343, ISO 87502500000000000000
     
    4 mm Diameter
    204.000 to 4.1001,700Not RatedASME B18.8.3M, DIN 7343, ISO 8750100000000000000
     
    5 mm Diameter
    205.000 to 5.1002,500Not RatedDIN 7343, ISO 87501000000000000000
     
    6 mm Diameter
    206.000 to 6.1003,700Not RatedDIN 7343, ISO 875050000000000000
     
    back to top