22mm Springs | McMaster-Carr

Squeeze these springs and they’ll push right back to their original length. When compressed, they apply steady pressure to keep components securely in place. Release the pressure and they snap back instantly, just like the tip of a ballpoint pen.

Spring Steel—Strong and resilient, but best suited for dry environments since moisture will cause these springs to rust.

Corrosion-Resistant 302 Stainless Steel—Won’t corrode from exposure to moisture and mild chemicals, including ammonia often found in cleaning solutions. These springs are easier to compress than steel, but can’t handle as high a load.

Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant stainless steel springs won't degrade when exposed to salt water and harsh chemicals. They're easier to compress than steel, but can’t handle as high a load.

	OD, mm	ID, mm	Wire Dia., mm	Compressed Lg. @ Max. Load, mm	Max. Load, lb.	Spring Rate, lbf/mm	End Type	Specs. Met	Pkg. Qty.		Pkg.
Spring Steel



	22	9.25	6.75	1.25	14.1	16	2	Closed and Ground	DIN 2095, DIN 2098, DIN 17223	5	94125K614	00000


	Corrosion-Resistant 302 Stainless Steel



			22	9.25	6.75	1.25	10.5	19	1.7	Closed and Ground	DIN 2095	5	2006N274	00000


			22	15	10	2.5	14	87	11	Closed and Ground	DIN 2095	2	2006N275	00000


			Highly Corrosion-Resistant 316 Stainless Steel



					22	5.99	3.81	1.09	17.7	9.5	2.2	Closed and Ground	—	1	8969T78	0000


					22	9.25	6.75	1.27	16.1	9.8	1.7	Closed and Ground	—	1	8969T857	0000
					22	11.99	9.19	1.4	14.2	10	1.3	Closed and Ground	—	1	8969T897	0000
					22	11.99	10.11	0.97	12.1	3.5	0.35	Closed and Ground	—	1	8969T732	0000
					22	15.01	11.81	1.6	13.8	12	1.5	Closed and Ground	—	1	8969T942	0000
					22	15.01	12.63	1.19	9.3	5.2	0.41	Closed and Ground	—	1	8969T836	0000
					22	18.29	14.27	2.03	14.9	19	2.6	Closed and Ground	—	1	8969T98	0000
					22	18.29	15.49	1.4	11.9	6.8	0.67	Closed and Ground	—	1	8969T912	0000

Extension Spring Stud Anchors

A black-oxide finish provides these steel anchors with mild corrosion resistance. Attach an extension spring to an anchor and then thread the anchor into your part for a secure connection.

	Thread
	Size	Min. Lg., mm	Spacing	Lg., mm	Dia., mm	Hole Dia., mm		Each
Black-Oxide Steel



		M4 × 0.7 mm	16	Coarse	22	4	2.5	9634K38	00000

Corrosion-Resistant Extension Spring Stud Anchors

These stainless steel stud anchors offer excellent corrosion resistance. Attach an extension spring to an anchor and then thread the anchor into your part for a secure connection.

	Thread
	Size	Min. Lg., mm	Spacing	Lg., mm	Dia., mm	Hole Dia., mm		Each
18-8 Stainless Steel



		M4 × 0.7 mm	16	Coarse	22	4	2.5	95907A170	000000

Corrosion-Resistant Swiveling Extension Spring Stud Anchors

These stainless steel stud anchors offer excellent corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to an anchor and then thread the anchor into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.

	Thread
	Size	Min. Lg., mm	Spacing	Lg., mm	Dia., mm	Hole Dia., mm	Hex Size, mm		Each
18-8 Stainless Steel



		M4 × 0.7 mm	16	Coarse	22	4	2.5	1.3	96376A570	000000

Swiveling Extension Spring Stud Anchors

A black-oxide finish provides these steel anchors with mild corrosion resistance. The head swivels 360° so the spring stays straight and properly coiled. Attach an extension spring to an anchor and then thread the anchor into your part for a secure connection. To make tightening easier, anchors have a hex socket on the bottom and wrench flats at the top of the threads.

	Thread
	Size	Min. Lg., mm	Spacing	Lg., mm	Dia., mm	Hole Dia., mm	Hex Size, mm		Each
Black-Oxide Steel



		M4 × 0.7 mm	16	Coarse	22	4	2.5	1.3	97745A170	000000

Slotted Spring Pins

End View

Squeeze these pins into holes and they expand slightly, creating tension to hold parts in place. They are often used as hinge pins and as fasteners for springs and power transmission components. An alternative to dowel pins, they're lighter in weight with a hollow center and don’t need a precise hole. Also known as roll pins.

Spring Steel—These pins won't deform from stress and vibration. Although they're stronger than stainless steel, they're best for dry environments since moisture will cause them to rust.

Corrosion-Resistant 18-8 Stainless Steel—The choice for wet and outdoor environments, these pins resist rusting. They are strong enough to join most components but won't withstand extreme stress and vibration as well as steel.

	Lg., mm	For Hole Dia., mm	Wall Thk., mm	Double Shear Breaking Strength, lbf	Min. Hardness	Specs. Met	Pkg. Qty.		Pkg.
Spring Steel







				2 mm Diameter

				22	2	0.2	330	Rockwell C42	DIN 7346, ISO 13337	50	97161A111	00000


				22	2 to 2.1	0.4	600	Rockwell C42	ISO 8752	100	91611A110	0000




						3 mm Diameter

						22	3	0.3	780	Rockwell C42	DIN 7346, ISO 13337	50	97161A135	00000


						22	3 to 3.1	0.6	1,400	Rockwell C42	ISO 8752	100	91611A160	0000




								4 mm Diameter

								22	4	0.5	1,700	Rockwell C42	DIN 7346, ISO 13337	50	97161A151	00000


								22	4 to 4.2	0.8	2,500	Rockwell C42	ISO 8752	100	91611A210	00000




										5 mm Diameter

										22	5	0.5	2,300	Rockwell C42	DIN 7346, ISO 13337	50	97161A169	00000


										22	5 to 5.2	1	3,900	Rockwell C42	ISO 8752	100	91611A309	00000




												6 mm Diameter

												22	6	0.75	4,000	Rockwell C42	DIN 7346, ISO 13337	25	97161A188	0000




														8 mm Diameter

														22	8	0.75	5,300	Rockwell C42	DIN 7346, ISO 13337	25	97161A209	00000


														22	8 to 8.25	1.5	9,600	Rockwell C42	ISO 8752	50	91611A508	00000




10 mm Diameter

22	10															1	5,300	Rockwell C42	DIN 7346, ISO 13337	10	97161A230	0000




		13 mm Diameter

		22	13													1.2	14,800	Rockwell C42	DIN 7346, ISO 13337	5	97161A266	00000




																16 mm Diameter

																22	16	1.5	22,000	Rockwell C42	DIN 7346, ISO 13337	1	97161A281	0000


				Corrosion-Resistant 18-8 Stainless Steel







																		2 mm Diameter

						22	2 to 2.1											0.4	Not Rated	Not Rated	ISO 8752	25	91610A213	0000




																		3 mm Diameter

																		22	3 to 3.1	0.6	Not Rated	Not Rated	ISO 8752	10	91610A413	0000




																		4 mm Diameter

																		22	4 to 4.2	0.8	Not Rated	Not Rated	ISO 8752	10	91610A518	0000




										5 mm Diameter

										22	5 to 5.2									1	Not Rated	Not Rated	DIN 1481, ISO 8752	10	91610A621	0000




																				8 mm Diameter

												22	8 to 8.25							1.5	Not Rated	Not Rated	DIN 1481, ISO 8752	10	91610A805	0000