Split-Tapered Bushings
Steel and Cast Iron
The tapered barrel on these bushings is split on both sides, allowing them to contract more tightly around the shaft than quick-disconnect and taper-lock bushings. They're for use with split-tapered sprockets and pulleys of the same bushing style. As you tighten the included screws, the bushing grips the shaft and pulls it into the sprocket or pulley.
Bushings with a machine key fit into a matching keyway on a sprocket or pulley for high-torque applications.
For technical drawings and 3-D models, click on a part number.
Keyway | |||||||
|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Overall Wd. | Wd. | Dp. | Taper | Fastener Tightening Torque, in.-lbs. | Each | |
Steel | |||||||
H Style Bushing | |||||||
| 18mm | 1 1/4" | 6mm | 3mm | 3° | 95 | 00000000 | 000000 |
| 19mm | 1 1/4" | 6mm | 3mm | 3° | 95 | 00000000 | 00000 |
| 20mm | 1 1/4" | 6mm | 3mm | 3° | 95 | 00000000 | 00000 |
| 22mm | 1 1/4" | 6mm | 3mm | 3° | 95 | 00000000 | 00000 |
| 24mm | 1 1/4" | 8mm | 3mm | 3° | 95 | 00000000 | 00000 |
| 25mm | 1 1/4" | 8mm | 3mm | 3° | 95 | 00000000 | 00000 |
| 28mm | 1 1/4" | 8mm | 3mm | 3° | 95 | 00000000 | 00000 |
| 30mm | 1 1/4" | 8mm | 3mm | 3° | 95 | 00000000 | 00000 |
H Style Bushing with Machine Key | |||||||
| 32mm | 1 1/4" | 8mm | 3mm | 3° | 95 | 00000000 | 00000 |
Cast Iron | |||||||
P1 Style Bushing with Machine Key | |||||||
| 22mm | 1 15/16" | 6mm | 3mm | 3° | 192 | 00000000 | 00000 |
| 24mm | 1 15/16" | 8mm | 3mm | 3° | 192 | 00000000 | 00000 |
| 28mm | 1 15/16" | 8mm | 3mm | 3° | 192 | 00000000 | 00000 |
| 30mm | 1 15/16" | 8mm | 3mm | 3° | 192 | 00000000 | 00000 |
Q1 Style Bushing with Machine Key | |||||||
| 40mm | 2 1/2" | 12mm | 3mm | 3° | 348 | 00000000 | 00000 |