About Roller Chain and Sprockets
More
Machinable-Bore Sprockets for ANSI Roller Chain
For a custom fit on your shaft, these sprockets can be machined to your exact specifications. They come machined to the shaft diameter size listed and are machinable up to the maximum shaft diameter size.
For technical drawings and 3-D models, click on a part number.
| Number of Teeth | For Shaft Dia. | For Max. Shaft Dia. | OD | Overall Wd. | Hub Dia. | Material | Each | |
For ANSI 160 Roller Chain (2" Pitch) | ||||||||
|---|---|---|---|---|---|---|---|---|
| 9 | 1 1/2" | 2 1/8" | 6.7" | 2 1/4" | 3 5/8" | Steel | 00000000 | 0000000 |
| 10 | 1 1/2" | 2 3/4" | 7.36" | 2 1/4" | 4 1/8" | Steel | 00000000 | 000000 |
| 11 | 1 1/2" | 3 1/4" | 8.01" | 2 1/2" | 4 3/4" | Steel | 00000000 | 000000 |
| 12 | 1 1/2" | 3 3/4" | 8.66" | 2 1/2" | 5 1/2" | Steel | 00000000 | 000000 |
| 13 | 1 1/2" | 4" | 9.31" | 2 3/4" | 6" | Steel | 00000000 | 000000 |
| 14 | 1 1/2" | 4 1/2" | 9.96" | 2 3/4" | 6 1/2" | Steel | 00000000 | 000000 |
| 15 | 1 1/2" | 5 1/4" | 10.61" | 2 3/4" | 7" | Steel | 00000000 | 00000000 |
| 16 | 1 1/2" | 5 1/4" | 11.26" | 2 3/4" | 7" | Steel | 00000000 | 00000000 |
| 18 | 1 1/2" | 5 1/4" | 12.54" | 2 3/4" | 7" | Steel | 00000000 | 00000000 |
| 20 | 1 1/2" | 5 1/4" | 13.83" | 2 3/4" | 7" | Steel | 00000000 | 00000000 |
| 24 | 1 1/2" | 5 1/4" | 16.39" | 2 3/4" | 7" | Steel | 00000000 | 00000000 |
Wear-Resistant Wide-Hub Idler Sprockets for ANSI Roller Chain
Hardened teeth give these steel sprockets increased wear resistance for a long service life. The wide hub provides stability under heavy loads. Designed to rotate freely on built-in bearings, idler sprockets maintain constant tension on your drive by pressing against your chain to take up slack and reduce wear and vibration. They are for use with roller chain tensioners.
For technical drawings and 3-D models, click on a part number.
Bearing | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Number of Teeth | For Shaft Dia. | OD | Overall Wd. | Hub Dia. | Material | Type | Material | Each | |
For ANSI 160 Roller Chain (2" Pitch) | |||||||||
| 9 | 1 1/2" | 6.7" | 2 1/4" | 3 5/8" | Steel | Needle Roller | Bronze | 00000000 | 0000000 |
ANSI Roller Chain and Links
Connecting links are also known as master links. They're used to join the ends of a chain length. The side plate is easy to remove for attaching to a chain. Adding links are also known as roller links. They require two connecting links to join chain. Adding-and-connecting links are also known as half links and offset links. A combination of connecting and adding links, they join chain that requires an odd number of links. For trade number 35 and up, the side plate is easy to remove for attaching them to chain.
For technical drawings and 3-D models, click on a part number.
 Chain |  Connecting Link |  Adding Link |
 Adding-and-Connecting Link |  |
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Lengths, ft. | Per Ft. | |
Steel | |||||||
|---|---|---|---|---|---|---|---|
| 160 | 2" | 1.125" | 1 1/4" | 15,490 | 1, 10, 20 | 00000000 | 000000 |
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Each | |
Steel | ||||||
|---|---|---|---|---|---|---|
| 160 | 2" | 1.125" | 1 1/4" | 15,490 | 00000000 | 000000 |
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Each | |
Steel | ||||||
|---|---|---|---|---|---|---|
| 160 | 2" | 1.125" | 1 1/4" | 15,490 | 00000000 | 000000 |
| Roller Chain Trade No. | Pitch | Roller Dia. | Roller Wd. | Working Load, lbs. | Each | |
Steel | ||||||
|---|---|---|---|---|---|---|
| 160 | 2" | 1.125" | 1 1/4" | 15,490 | 00000000 | 000000 |