Sprockets for 2" Shaft Diameter

Sprocket teeth mesh with your roller chain to smoothly transmit power. These U.S.-made sprockets have machined teeth for a more precise fit than flame-cut or punched teeth, allowing them to glide in and out of the chain to reduce wear and extend chain life.

Steel—Steel is strong, but best for dry environments since moisture will cause it to rust.

Wear-Resistant Steel with Hardened Teeth—These sprockets have teeth that are hardened from the tip to the base so they withstand chain contact and wear evenly. That means fewer broken teeth and a longer lifespan than sprockets with unhardened or tip-hardened teeth. Steel is best for dry environments since moisture will cause it to rust.

Corrosion-Resistant 18-8 Stainless Steel—Won't corrode from frequent washdowns and mild chemicals, including ammonia often found in cleaning solutions.

Finished Bore—Mount these sprockets onto your shaft and secure with a set screw—no machining required.

Plain Bore—Plain bore sprockets give you options—machine a custom bore, weld, or press-fit them in place. They're sized to the minimum shaft diameter listed and are machinable up to the maximum.

	For Roller Chain							Keyway
	Trade No.	Std.	Pitch	No. of Teeth	OD	Bore Type	For Shaft Dia.	Wd.	Dp.		Each
For Single Strand







				Steel

				40	ANSI	1/2"	23	3 15/16"	Plain	5/8" to 2"	—	—	6793K155	000000


				50	ANSI	5/8"	19	4 1/8"	Plain	5/8" to 2"	—	—	6793K174	00000
				50	ANSI	5/8"	20	4 5/16"	Plain	3/4" to 2"	—	—	6793K175	00000
				50	ANSI	5/8"	21	4 1/2"	Plain	3/4" to 2"	—	—	6793K176	00000
				50	ANSI	5/8"	22	4 3/4"	Plain	3/4" to 2"	—	—	6793K177	00000
				50	ANSI	5/8"	23	4 15/16"	Plain	3/4" to 2"	—	—	6793K178	00000
				50	ANSI	5/8"	24	5 1/8"	Plain	3/4" to 2"	—	—	6793K179	00000
				50	ANSI	5/8"	25	5 5/16"	Plain	3/4" to 2"	—	—	6793K181	00000
				60	ANSI	3/4"	16	4 1/4"	Plain	3/4" to 2"	—	—	6793K192	00000
				60	ANSI	3/4"	36	9"	Finished	2"	1/2"	1/4"	6236K535	000000
				60	ANSI	3/4"	38	9 1/2"	Finished	2"	1/2"	1/4"	6236K575	000000


				60	ANSI	3/4"	40	10"	Finished	2"	1/2"	1/4"	6236K492	000000
				60	ANSI	3/4"	42	10 7/16"	Finished	2"	1/2"	1/4"	6236K604	000000
				60	ANSI	3/4"	45	11 3/16"	Finished	2"	1/2"	1/4"	6236K708	000000
				60	ANSI	3/4"	48	11 7/8"	Finished	2"	1/2"	1/4"	6236K618	000000
				60	ANSI	3/4"	54	13 5/16"	Finished	2"	1/2"	1/4"	2741T124	000000
				60	ANSI	3/4"	60	14 3/4"	Finished	2"	1/2"	1/4"	6236K588	000000
				60	ANSI	3/4"	70	17 1/8"	Finished	2"	1/2"	1/4"	2741T134	000000
				60	ANSI	3/4"	72	17 5/8"	Finished	2"	1/2"	1/4"	2741T144	000000
				80	ANSI	1"	13	4 11/16"	Plain	1" to 2"	—	—	6793K35	00000
				80	ANSI	1"	15	5 5/16"	Finished	2"	1/2"	1/4"	6280K644	00000


				80	ANSI	1"	16	5 5/8"	Finished	2"	1/2"	1/4"	6280K424	000000
				80	ANSI	1"	17	5 15/16"	Finished	2"	1/2"	1/4"	6280K427	000000
				80	ANSI	1"	18	6 1/4"	Finished	2"	1/2"	1/4"	6280K435	000000
				80	ANSI	1"	19	6 9/16"	Finished	2"	1/2"	1/4"	6280K14	000000
				80	ANSI	1"	20	6 15/16"	Finished	2"	1/2"	1/4"	6280K539	000000
				100	ANSI	1 1/4"	11	5"	Finished	2"	1/2"	1/4"	2741T236	000000
				100	ANSI	1 1/4"	12	5 7/16"	Finished	2"	1/2"	1/4"	2741T246	000000
				100	ANSI	1 1/4"	13	5 13/16"	Finished	2"	1/2"	1/4"	2741T256	000000
				100	ANSI	1 1/4"	14	6 1/4"	Finished	2"	1/2"	1/4"	2741T264	000000
				100	ANSI	1 1/4"	15	6 5/8"	Finished	2"	1/2"	1/4"	2741T274	000000


				100	ANSI	1 1/4"	16	7"	Finished	2"	1/2"	1/4"	2741T283	000000
				100	ANSI	1 1/4"	17	7 7/16"	Finished	2"	1/2"	1/4"	2741T293	000000
				100	ANSI	1 1/4"	18	7 13/16"	Finished	2"	1/2"	1/4"	2741T313	000000
				100	ANSI	1 1/4"	19	8 1/4"	Finished	2"	1/2"	1/4"	2741T323	000000
				100	ANSI	1 1/4"	20	8 5/8"	Finished	2"	1/2"	1/4"	2741T333	000000




						Wear-Resistant Steel with Hardened Teeth

						80	ANSI	1"	13	4 11/16"	Finished	2"	1/2"	1/4"	2500T116	00000


						80	ANSI	1"	14	5"	Finished	2"	1/2"	1/4"	2500T119	00000
						80	ANSI	1"	15	5 5/16"	Finished	2"	1/2"	1/4"	2500T679	000000
80						ANSI	1"	16	5 5/8"	Finished	2"	1/2"	1/4"	2500T689	000000
80	ANSI					1"	17	5 15/16"	Finished	2"	1/2"	1/4"	2500T815	000000
80	ANSI					1"	18	6 1/4"	Finished	2"	1/2"	1/4"	2500T819	000000
80	ANSI					1"	19	6 9/16"	Finished	2"	1/2"	1/4"	2500T388	000000
80	ANSI					1"	20	6 15/16"	Finished	2"	1/2"	1/4"	2500T396	000000




		Corrosion-Resistant 18-8 Stainless Steel

		50	ANSI			5/8"	24	5 1/8"	Plain	3/4" to 2"	—	—	6799K174	000000


		60	ANSI			3/4"	16	4 1/4"	Plain	3/4" to 2"	—	—	6799K186	000000


		For Double Strand







								Wear-Resistant Steel with Hardened Teeth

								60-2	ANSI	3/4"	16	4 1/4"	Plain	1" to 2"	—	—	2784K55	000000

Quick-Disconnect (QD) Bushings


Clamp-On Shaft Mount

The screw connections on these bushings easily mate to compatible quick-disconnect sprockets and pulleys. Bushings fit quick-disconnect (QD) sprockets and pulleys of the same bushing trade number. As you tighten the included screws, the bushing grips the shaft and pulls it into the sprocket or pulley.

		Keyway
	Overall Wd.	Wd.	Dp.	Fastener Tightening Torque, in·lbf	Material	Includes	For Shaft Dia.		Each
Clamp-On Shaft Mount







				Bushing Trade Number SD

				1 13/16"	—	—	108	Sintered Cast Iron	Clamping Screws	2"	6086K427	000000




						Bushing Trade Number SDS

						1 3/8"	—	—	108	Sintered Cast Iron	Clamping Screws	2"	6086K327	00000




								Bushing Trade Number SF

								2 1/16"	1/2"	1/4"	360	Sintered Steel	Clamping Screws	2"	6086K634	00000




										Bushing Trade Number SK

										1 15/16"	1/2"	1/4"	180	Sintered Steel	Clamping Screws	2"	6086K531	00000

Taper-Lock Bushings

Mount these hubless bushings flush into your sprocket or pulley for a slim profile with no protruding screws. They are for use with taper-lock sprockets of the same bushing trade number. As you tighten the included set screws, the bushing grips the shaft and pulls it into your sprocket or pulley.

			Keyway
	For Shaft Dia.	Overall Wd.	Wd.	Dp.	Taper	Fastener Tightening Torque, in·lbf	Includes		Each
Steel







				Bushing Trade Number 2012

				2"	1 1/4"	1/2"	3/16"	8°	280	Machine Key, Set Screws	57095K193	000000




						Bushing Trade Number 2517

						2"	1 3/4"	1/2"	1/4"	8°	430	Set Screws	57095K216	00000




								Bushing Trade Number 3020

								2"	2"	1/2"	1/4"	8°	800	Set Screws	57095K333	000000


								Cast Iron







												Bushing Trade Number 2525

												2"	2 1/2"	1/2"	1/4"	8°	430	Set Screws	57095K239	000000




														Bushing Trade Number 3030

														2"	3"	1/2"	1/4"	8°	800	Set Screws	57095K653	000000




																Bushing Trade Number 3535

																2"	3 1/2"	1/2"	1/4"	8°	1,000	Set Screws	57095K382	000000




																		Bushing Trade Number 4040

																		2"	4"	1/2"	1/4"	8°	1,700	Set Screws	57095K719	000000




																				Bushing Trade Number 4545

2"																				4 1/2"	1/2"	1/4"	8°	2,450	Set Screws	57095K756	000000

Split-Tapered Bushings

Steel

The tapered barrel on these bushings is split on both sides, allowing them to contract more tightly around the shaft than quick-disconnect and taper-lock bushings. They're for use with split-tapered sprockets and pulleys of the same bushing trade number. As you tighten the included screws, the bushing grips the shaft and pulls it into the sprocket or pulley.

Machine Key—Bushings with a machine key fit into a matching keyway on a sprocket or pulley for high-torque applications.

			Keyway
	For Shaft Dia.	Overall Wd.	Wd.	Dp.	Taper	Fastener Tightening Torque, in·lbf		Each
Steel







				Bushing Trade Number Q1 with Clamping Screws, Machine Key

				2"	2 1/2"	1/2"	1/4"	3°	348	9859T613	000000

Quick-Grip Screw-Clamp Bushings

Also known as Trantorque bushings, these tighten with a twist of the collar nut—no screws needed. As you tighten the collar nut, the inner sleeve contracts onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear.

	OD	Overall Wd.	Max. Torque, in·lbf		Each
Steel



	2"	2 7/8"	3 9/16"	12,900	5926K32	0000000

Self-Adjusting Spring Bushings

A toothed slot lets these bushings contract for insertion into the bore of your sprocket or pulley and then expand for a snug fit. Made of spring steel, they flex under stress and shock and can handle oscillating or slow rotational motion.

	Overall Wd.	Material		Each
For 2" Diameter Shafts



	2 1/4"	1"	Steel	58365K132	000000


	2 1/4"	1 1/2"	Steel	58365K65	00000
	2 1/4"	2"	Steel	58365K66	00000
	2 1/4"	2 1/2"	Steel	58365K28	00000
	2 1/4"	3"	Steel	58365K133	00000
	2 3/8"	3/4"	Steel	58365K127	00000
	2 3/8"	1"	Steel	58365K128	00000
	2 3/8"	1 1/4"	Steel	58365K129	00000
	2 3/8"	1 1/2"	Steel	58365K131	00000
	2 3/8"	2"	Steel	58365K134	00000
	2 3/8"	3"	Steel	58365K135	00000


	2 1/2"	1"	Steel	58365K67	00000
	2 1/2"	1 1/2"	Steel	58365K68	00000
	2 1/2"	2"	Steel	58365K69	00000
	2 1/2"	2 1/2"	Steel	58365K71	00000
	2 1/2"	3"	Steel	58365K72	00000