We will reply to your message within an hour.
Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
Extra length allows access to fasteners on long bolts.
These short sockets fit spaces where height clearance is limited.
Pivot the head to access fasteners from an angle.
With a plastic insert, these sockets firmly grip hex nuts and bolts without rounding them or scratching highly polished finishes.
Also known as pipe plug sockets, these sockets have a square shape that provides the best possible grip on square fasteners and prevents rounding.
Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet IEC 60900.
Quickly position these sockets on square and external 8-point fasteners.
For easy tightening and loosening, these sockets have pins that grip the slotted sides on bearing nuts.
Designed to fit on external Torx-Plus fasteners, often found on pickup trucks, these sockets have squared lobes that resist slipping at high torque.
Grip the indentations around the outside of tri-groove fasteners.
Turn many sizes of square, hex, and 8-point fasteners with one socket. Place over the fastener and 54 pins move to grip it securely.
These sockets fit the nuts found on water and gas valves.
Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet ASTM F1505 and IEC 60900.
The short bit on these sockets fits in spaces where height clearance is limited.
Extra-long bits allow access to hard-to-reach fasteners.
The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.
These sockets are also known as Robertson bits.
These sockets are also known as pin-in-Torx bits.
These sockets are also known as pin-in-hex or pin-in-socket bits.
Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.
Make maximum contact with all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.
A rubber insert grips the plug to prevent damage.
The opening is designed to grip threaded rod for quick installation and removal without damaging the threads.
Designed to fit inside strut channel, these sockets make it easier to mount the channel than using an extension or additional tools.
Achieve the best possible grip on hex fasteners and prevent rounding.
A magnet holds the fastener securely enough to drive self-tapping screws.
With a smaller OD than standard sockets, these fit between tightly spaced fasteners.
Tighten or loosen nuts and bolts without damaging the finish.
Quickly position these sockets on square fasteners.
The square shape provides the best possible grip on square fasteners and prevents rounding.
The 12-point shape quickly positions on hex fasteners.
Designed to remove and install dual wheels on trucks and trailers, these sockets have a hex recess for accessing lug nuts and a square recess to turn the threaded shafts found on inner wheels.
The hex shape grips hex fasteners and prevents rounding.
Use bit sockets as an alternative to a screwdriver or L-key.
Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.
For high quality at a lower price, choose these U.S.A.-made sets.
Suitable for occasional maintenance work, these sets are imported.
Shaped and sized for compatibility with wheel bearing locknuts on trucks and trailers, the sockets in these sets make it easy to install and remove locknuts.
With squared lobes that won’t slip at high torque, all of the sockets in these sets are designed to fit on external Torx-Plus fasteners, often found on pickup trucks.
Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.
Turn nuts on bolts and threaded rod, which pass through these sockets.
Make maximum contact on all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.
Convert from one square drive size to another.
Attach to your socket for a longer reach.
Lock your socket into the extension to prevent accidental disengagement..
The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.
These sockets are made to withstand the high torque and force of impact tools.
Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.
Remove and install dual wheels on trucks and trailers with the sockets in these sets.
Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.
Lock your socket into the extension to prevent accidental disengagement.
Push the square drive through the adapter to change size.
These adapters are insulated to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900.
Extend your socket's reach.
Safely lengthen the reach of your socket while working near flammable vapors and combustible residue.
Safely extend your reach in areas where you could accidentally come into contact with live circuits.
Lock your socket into these extensions to prevent accidental disengagement.
The male ends of these extensions are rounded, so they can pivot to use your tool at an angle.
Bend these socket extensions around obstructions to turn hard-to-reach fasteners.
Turn sockets with a bit screwdriver.
Attach one of these adapters to a socket to turn it with an open-end or box wrench.
Change a standard wrench handle into a ratcheting wrench.
Fit these adapters between your wrench and socket to enable finger tightening.
Set a desired torque within the range.
Adapters are set to a specific torque and cannot be adjusted.
A digital display shows how torque measurements change as you turn the wrench. Set the desired torque and angle—lights and an audible alarm indicate when target has been reached or exceeded.
Lock the adapter on your tool and the socket to the adapter to prevent accidental disengagement.
A magnet holds the socket, making changes quicker.
Pull the collar to quickly attach and remove sockets.
Use sockets with tools that accept hex shanks, such as impact drivers and power drills.
Bend these extensions around obstructions to access hard-to-reach fasteners.
A ratchet mechanism allows you to turn fasteners without removing and repositioning the wrench.
The handle is covered in rubber for a comfortable grip.
No need to pull the socket off the tool—push a button to release.
A gasket seals in permanent lubrication and keeps out dirt, dust, and moisture.
When the ratchet head becomes worn or damaged, change it out for a new one.
Twist the grip to rapidly turn a socket before final tightening or to remove a fastener once loosened. The handle also swings like a traditional ratchet wrench.
Also known as a construction or spud handle, wrenches use the pointed end to align bolt holes.
The shaft on these wrenches extends and locks.
Made of aluminum-bronze, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
Insulated to protect against accidental contact with live electrical circuits, these wrenches are tested to 1,000 volts to meet IEC 60900.
Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional click sound when turned.
Turn sockets in the most confined spaces.
The 20° offset head provides clearance when reaching over obstructions.
Pivot the head to access fasteners in tight spots.
The L shape provides clearance when reaching over obstructions.
Pivot the head for access to fasteners in tight spots.
Extend the shaft for additional length.
A rubber coating provides a comfortable grip.
Position the head anywhere along the handle.
Turn sockets from above when there's not room to swing a standard wrench handle.
The ratcheting mechanism turns sockets quickly.
Bend around obstructions to turn hard-to-reach fasteners.
Fasten quickly with these crank-style handles.
Also known as impact drivers, use these tools with impact sockets to break frozen bolts and screws free. Strike with a hammer to tighten and loosen fasteners.
These wrenches slip to disengage and stop turning the fastener when the set torque is reached, preventing overtightening.
Set the desired torque and the wrench indicates when it's reached with an audible click and an impulse in the grip.
Unlike most torque wrenches, you don’t have to return the torque setting to the lowest value after use. These tools are also known as split-beam torque wrenches.
When the set torque is reached, these wrenches signal with an audible click and an impulse in the grip.
Made of beryllium copper, these wrenches satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
A main pointer on the dial shows torque as it’s being applied and a memory pointer indicates the maximum torque reached.
Measure with an accuracy of ±7%.
Trust the precision of your measurements—these wrenches are accurate to ±2%.
The most advanced torque wrenches we offer, these tools store and recall up to 1,500 torque and angle measurements.
Trust the precision of your measurements—these wrenches are accurate to ±1%.
Measure with an accuracy of ±2%.
These wrenches have an accuracy of ±2.0%.
Set torque and the wrench will prevent you from exceeding it. These are also known as nutrunners.
Built for durability, these wrenches handle the demands of high-volume production and tough maintenance applications.
Use these tools for general shop applications.
Built for durability, these high-performance tools handle the demands of high-volume production and tough maintenance applications.
Use these wrenches for medium-volume production, general maintenance, and construction applications.
These tools are suitable for general shop, maintenance, and automotive work.
Use these wrenches with impact sockets only.
The slots in these low-profile organizers are a different color than the base so it's clear when tools are missing from your bench top or drawer.
Store sockets on posts marked with the size.
Magnets hold sockets securely in place.
The rail is smooth plastic so the clips move more easily than on steel-rail organizers.
Move the sliding clips to any position along the rail to hold a variety of sockets.
Hold different square drive sizes on the four clip rails stored in these trays.
Slip these magnetic inserts into your sockets to keep fasteners from falling out.
Change heads to use these tools as an open-end, box, square drive, or hex-key wrench.
Instead of carrying around a large drum plug wrench, keep these sockets in your toolbox and turn with a ratchet wrench.
Use your ratchet wrench as a handle to reach filters and other round objects in tight spots.
Pair these tools with your ratchet wrench to get more leverage.
Attach these adapters to square-drive tools.
Lock your bit into the adapter to prevent accidental disengagement. These adapters attach to square-drive tools.
Attach a socket to the 1/4" square drive tip. These tools have a dial that shows how torque measurements change as you turn the driver. Use to fasten to a specific torque, determine fastener torque specifications, and identify the torque required to loosen tightened fasteners.
These sets include an assortment of sockets and wrenches for occasional maintenance work.