McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    24 Products

    Hardwire Electromagnets
    3D CAD models available

    Position the face of these magnets in direct contact with a flat metal surface and turn on the power to create a magnetic hold. Magnets have wire leads that connect to a DC electromagnet power supply (sold separately). Holding power is not adjustable. When turned off, the magnet will still have some residual magnetism.
    Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
    Rectangle
    Image of Product. Front orientation. Electromagnets. Hardwire Electromagnets, Rectangle.
    Wattage,
    W
    Wd.
    Lg.
    Ht.
    Max. Pull,
    lbf
    Sets of
    Poles
    Max. Temp.,
    ° F
    Thread
    Size
    Thread
    Dp.
    No. of Mounting
    Holes
    Mounting Hole
    Ctr.-to-Ctr.
    Wire Lead
    Lg.
    Each
    12V DC
    81 1/2"1 1/2"1 1/4"100110010-32
    		3/8"1__24"000000000000000
    101 1/2"2 1/2"1 1/4"160110010-32
    		3/8"21"24"00000000000000
    142 1/2"2 1/2"1 1/2"30011001/4"-20
    		1/2"33/8"36"00000000000000
    292 1/2"4 1/2"1 7/8"60011001/4"-20
    		3/4"22"36"00000000000000
     
    24V DC
    81 1/2"1 1/2"1 1/4"100110010-32
    		3/8"1__24"00000000000000
    101 1/2"2 1/2"1 1/4"160110010-32
    		3/8"21"24"00000000000000
    142 1/2"2 1/2"1 1/2"30011001/4"-20
    		1/2"33/8"36"00000000000000
    283 1/2"3 1/2"2"70011003/8"-16
    		3/4"1__36"00000000000000
    292 1/2"4 1/2"1 7/8"60011001/4"-20
    		3/4"22"36"00000000000000
     
    110V DC
    122 1/2"4 1/2"2"75011001/4"-20
    		1/2"22"24"0000000000000
    373"6"2"1,00011003/8"-16
    		3/8"23"24"0000000000000
    584"8"2 1/2"1,70011003/8"-16
    		1"24"36"00000000000000
    656"12"3 1/2"5,00011001/2"-13
    		1 1/4"23"72"0000000000000
     

    Hardwire Electromagnets with Parallel Poles
    3D CAD models available

    Parallel poles create a better magnetic hold on thinly painted, plated, or coated flat metal surfaces than other magnets. A terminal block on the magnet connects to a DC electromagnet power supply (sold separately). Holding power is not adjustable. When turned off, the magnet will still have some residual magnetism.
    Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
    Rectangle
    Image of Product. Front orientation. Electromagnets. Hardwire Electromagnets with Parallel Poles.
    Wattage,
    W
    Wd.
    Lg.
    Ht.
    Max. Pull,
    lbf
    Sets of
    Poles
    Max. Temp.,
    ° F
    Thread
    Size
    Thread
    Dp.
    No. of Mounting
    Holes
    Mounting Hole
    Ctr.-to-Ctr.
    Each
    24V DC
    41"1"1 3/8"20110010-32
    		1/4"21/2"00000000000000
    61"2"1 3/8"8011001/4"-20
    		1/4"21"0000000000000
    111"3"1 3/8"17011001/4"-20
    		1/4"22"0000000000000
    131"4"1 3/8"21011001/4"-20
    		1/4"23"0000000000000
    221"6"1 3/8"26011001/4"-20
    		1/4"24 1/2"0000000000000
    222"4"2 3/4"47011005/16"-18
    		1/4"23"0000000000000
    382"6"2 3/4"62011005/16"-18
    		1/4"24 1/2"0000000000000
    522"8"2 3/4"93011005/16"-18
    		1/4"26 1/2"0000000000000
     

    Plug-In Electromagnets
    3D CAD models available

    Position the face of these magnets in direct contact with a flat metal surface and plug in to create a magnetic hold. The plug contains a transformer that converts power from AC to DC, so no additional wiring or power source is needed. Holding power is not adjustable. When turned off, the magnet will still have some residual magnetism.
    Warning: Maximum pull ratings are based on direct contact with rust-free and unpainted iron plate. Variations in material condition will significantly reduce these ratings. Do not use for lifting over people.
    Rectangle
    Image of Product. Front orientation. Electromagnets. Plug-In Electromagnets, Rectangle.
    Wattage,
    W
    Wd.
    Lg.
    Ht.
    Max. Pull,
    lbf
    Sets of
    Poles
    Max. Temp.,
    ° F
    Thread
    Size
    Thread
    Dp.
    No. of Mounting
    Holes
    Mounting Hole
    Ctr.-to-Ctr.
    Cord Lg.,
    ft.
    Each
    120V AC
    82 1/2"2 1/2"1 1/2"28011001/4"-20
    		1/2"23/4"300000000000000
    101 1/2"2 1/2"1 1/4"80110010-32
    		1/2"21"30000000000000
    302 1/2"4 1/2"1 7/8"30011001/4"-20
    		1/2"22"30000000000000
     
    back to top