Stud-Driven Square Hole Punches
These punches make openings for a variety of panel switches and connectors. Also known as chassis and panel punches, they cut through sheet metal and have an automatic centering design for accurate alignment. Drill pilot holes slightly larger than the size of the stud.
Punch for 1.813" holes can only be used with a hydraulic driver and does not require a stud adapter.
Punches for 0.5" to 1" holes can be used with a manual wrench or hydraulic driver, but require a stud adapter (sold separately) when used with a hydraulic driver.
Hole Punches | ||||||||
---|---|---|---|---|---|---|---|---|
For Hole | Hydraulic Driver Stud Adapters | |||||||
Lg. | Wd. | For Max. Steel Thick. | Material | Includes | Each | Each | ||
For Use On Steel | ||||||||
0.5" | 0.5" | 1/16" | Steel | Punch, Die, Stud, Nut | 0000000 | 0000000 | 00000000 | 000000 |
0.625" | 0.625" | 1/16" | Steel | Punch, Die, Stud, Nut | 0000000 | 000000 | 00000000 | 00000 |
0.75" | 0.75" | 1/16" | Steel | Punch, Die, Stud, Nut | 0000000 | 000000 | 00000000 | 00000 |
0.875" | 0.875" | 1/16" | Steel | Punch, Die, Stud, Nut | 0000000 | 000000 | 00000000 | 00000 |
0.95" | 0.95" | 1/16" | Steel | Punch, Die, Stud, Nut | 0000000 | 000000 | 00000000 | 00000 |
1" | 1" | 1/16" | Steel | Punch, Die, Stud, Nut | 0000000 | 000000 | 00000000 | 00000 |
1.813" | 1.813" | 1/8" | Steel | Punch, Die, Stud, Nut | 0000000 | 00000000 | 000000 | 00 |
Manual Wrench-Operated Stud-Driven DIN-Size Hole Punches
Turn the studs with a wrench to cut DIN-sized openings for rectangular- and square-shaped instruments. These punches require a puller adapter (sold separately) and can also be used with a hydraulic driver. Drill pilot holes slightly larger than the size of the stud.
Hydraulic Driver-Operated Stud-Driven DIN-Size Hole Punches
Cut DIN-sized openings for rectangular- and square-shaped instruments. These punches require a driver ram and are for use with a hydraulic pump (sold separately). Drill pilot holes slightly larger than the size of the stud.