McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    56 Products

    Torque Screwdriver and Bit Sets

    Image of Product. Front orientation. Torque Screwdrivers. Torque Screwdriver and Bit Sets .
    Image of Attribute. Front orientation. Torque Screwdriver and Bit Sets .

    These sets include an adjustable torque driver, bits for different drive styles, and a socket adapter. To adjust torque, remove the black vinyl end cap and turn the attached adjustment key. When set torque is reached, the driver slips to disengage and stop turning the fastener, preventing overtightening. Sets come with a calibration certificate that states the product has passed a test for accuracy.
    Note: Accuracy ratings do not apply to the lower 20% of the torque range.
    Material
    No. of
    Pieces
    Components Included
    Adapters Included
    Extensions Included
    Drive Tools Included
    Torque Range
    Graduations
    For Bit Hex
    Shank Size
    Torque-Limiting
    Direction
    Clockwise
    Accuracy
    Overall
    Lg.
    Shaft
    Handle
    Certificate Type
    Each
    Slip-Release Torque Limiter
     
    in·lbf, N-m
    291 Adapter
    1 Drive Tool
    1 Extension
    26 Bits    		1/4" Square Drive Socket AdapterScrewdriver Bit ExtensionTorque-Limiting Screwdriver2 in·lbf to 36 in·lbf
    0.2 N-m to 4 N-m    		2 in·lbf
    0.2 N-m    		1/4"Clockwise±6%7 3/4"AluminumAluminum
    		Calibration Certificate Traceable to NIST00000000000000
     

    Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change Hex Shank

    Have a range of bits ready to turn the most common screw styles and sizes.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    No. of
    Pieces
    Components Included
    Bits Included
    Adapters Included
    Drive Tools Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    101 Adapter
    9 Bits    		Hex: 1/8", 5/32", 3/16" (1" O'all Lg.)
    Phillips: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 3/16", 7/32", 1/4" (1" O'all Lg.)    		2 3/8" Lg. Bit Adapter for Power Tools—SteelPlastic Case0000000000000
    111 Adapter
    10 Bits    		Phillips: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 7/32", 1/4", 5/16" (1" O'all Lg.)
    Torx: T10, T15, T20 (1" O'all Lg.)    		2 3/8" Lg. Bit Adapter for Power Tools—SteelPlastic Case000000000000
    171 Adapter
    16 Bits    		Phillips: No. 0 (1" O'all Lg.)—1 ea.
    Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea.
    Phillips: No. 2 (1" O'all Lg.)—4 ea.
    Slotted: 3/16" (1" O'all Lg.)—1 ea.
    Slotted: 7/32", 1/4", 9/32" (1" O'all Lg.)—2 ea.    		2 1/8" Lg. Bit Adapter for Power Tools—SteelPlastic Caddy000000000000
    271 Adapter
    1 Drive Tool
    25 Bits    		Clutch: 1/8", 5/32" (1" O'all Lg.)
    Hex: 5/64", 3/32", 1/8", 5/32", 3/16" (1" O'all Lg.)
    Phillips: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 5/32", 11/64", 7/32", 1/4", 9/32" (1" O'all Lg.)
    Square: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)
    Torx: T10, T15, T20, T25, T30, T40 (1" O'all Lg.)    		2 1/4" Lg. Bit Adapter for Power Tools7 3/4" Lg. Bit ScrewdriverSteelPlastic Case0000000000000
    291 Drive Tool
    2 Adapters
    26 Bits    		Hex (Inch): 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" (1" O'all Lg.)—1 ea.
    Hex (Metric): 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)—1 ea.
    Phillips: No. 1, No. 3 (1" O'all Lg.)—1 ea.
    Phillips: No. 2 (1" O'all Lg.)—2 ea.
    Slotted: 3/16", 1/4", 9/32" (1" O'all Lg.)—1 ea.    		1/4" Male Square Drive × 1/4" Hex Shank Adapter
    2 1/8" Lg. Bit Adapter for Power Tools    		7 3/4" Lg. Bit ScrewdriverSteelPlastic Case00000000000000
    301 Adapter
    29 Bits    		External Hex: 1/4", 5/16", 3/8", 7/16" (2 5/8" O'all Lg.)—1 ea.
    Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea.
    Phillips: No. 2 (1" O'all Lg.)—7 ea.
    Phillips: No. 2 (2" O'all Lg.)—2 ea.
    Slotted: 13/64", 15/64", 9/32" (1" O'all Lg.)—1 ea.
    Slotted: 15/64" (2" O'all Lg.)—1 ea
    Square: No. 1, No. 3 (1" O'all Lg.)—1 ea.
    Square: No. 2 (1" O'all Lg.)—5 ea.
    Square: No. 2 (2" O'all Lg.)—1 ea.    		2 1/4" Lg. Bit Adapter for Power Tools—SteelPlastic Case0000000000000
    351 Drive Tool
    2 Adapters
    32 Bits    		Hex (Inch): 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (1" O'all Lg.)
    Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm (1" O'all Lg.)
    Phillips: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 7/32", 1/4" (1" O'all Lg.)
    Square: No. 1, No. 2 (1" O'all Lg.)
    Torx: T8, T10, T15, T20, T25, T27, T30 (1" O'all Lg.)    		1/4" Male Square Drive × 1/4" Hex Shank Adapter
    2 1/4" Lg. Bit Adapter for Power Tools    		3 1/2" Lg. Tight-Clearance Ratcheting Bit ScrewdriverSteelMetal Case0000000000000
    381 Adapter
    1 Drive Tool
    36 Bits    		Drilled Spanner: No. 4, No. 6, No. 8, No. 10 (1" O'all Lg.)
    Phillips: No. 1 (1" O'all Lg.) - 1 ea.
    Phillips: No. 2 (1" O'all Lg.) - 2 ea.
    Pozidriv®: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 5/16"
    Square: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Tamper-Resistant Hex: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" (1" O'all Lg.)
    Tamper-Resistant Torx: T8, T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)
    Torq-Set®: No. 6, No. 8, No. 10 (1" O'all Lg.)
    Tri-Wing®: No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)    		1/4" Hex Drive Adapter3 1/2" Lg. Ratchet WrenchSteelPlastic Case00000000000
    391 Drive Tool
    2 Adapters
    36 Bits    		Drilled Spanner: No. 4, No. 6, No. 8, No. 10 (1" O'all Lg.)
    Phillips: No. 1, No. 2 (1" O'all Lg.)
    Pozidriv®: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)
    Slotted: 1/4", 5/16" (1" O'all Lg.)
    Square: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Tamper-Resistant Hex: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" (1" O'all Lg.)
    Tamper-Resistant Torx: T8, T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)
    Torq-Set®: No. 6, No. 8, No. 10 (1" O'all Lg.)
    Tri-Wing®: No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)    		1/4" Female Square Drive × 1/4" Female Hex Adapter
    2 1/4" Lg. Bit Adapter for Power Tools    		Screwdriver HandleSteelPlastic Case000000000000
    401 Drive Tool
    2 Adapters
    37 Bits    		Clutch: 5/32" (1" O'all Lg.)—1 ea.
    Hex (Inch): 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (1" O'all Lg.)—1 ea.
    Hex (Metric): 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm (1" O'all Lg.)—1 ea.
    Phillips: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea.
    Pozidriv®: No. 1, No. 2 (1" O'all Lg.)—1 ea.
    Slotted: 7/64", 5/32", 7/32" (1" O'all Lg.)—1 ea.
    Slotted: 9/32" (1" O'all Lg.)—2 ea.
    Square: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea.
    Torx: T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)—1 ea.    		1 7/8" Lg. Bit Adapter for Power Tools
    1/4" Male Square Drive × 1/4" Hex Shank Adapter    		7 1/2" Lg. Bit ScrewdriverSteelPlastic Case000000000000
    511 Adapter
    50 Bits    		Hex: 1/8", 3/16" (1" O'all Lg.)—10 ea.
    Hex: 5/32" (1" O'all Lg.)—5 ea.
    Phillips: No. 1, No. 2 (1" O'all Lg.)—10 ea.
    Phillips: No. 3 (1" O'all Lg.)—5 ea.    		2 3/8" Lg. Bit Adapter for Power Tools—SteelPlastic Case000000000000
    1004 Adapters
    96 Bits    		Drilled Spanner: No. 4, No. 6, No. 8, No. 10, No. 12, 1/4" (1" O'all Lg.)—1 ea.
    Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" (1" O'all Lg.)—1 ea.
    Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm (1" O'all Lg.)—1 ea.
    Phillips: No. 0 (1" O'all Lg.)—1 ea.
    Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea.
    Phillips: No. 2 (1" O'all Lg.)—4 ea.
    Pozidriv®: No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea.
    Screw-In Hook Driver Bit—1 ea.
    Slotted: 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 3/8" (1" O'all Lg.)—1 ea.
    Square: No. 0, No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)—1 ea.
    Tamper-Resistant Hex (Inch): 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16" (1" O'all Lg.)—1 ea.
    Tamper-Resistant Hex (Metric): 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)—1 ea.
    Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)—1 ea.
    Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40, T45, T50, T55 (1" O'all Lg.)—1 ea.    		1/4" Male Square Drive × 1/4" Hex Shank Adapter (1" O'all Lg.)
    1/4" Male Square Drive × 1/4" Hex Shank Adapter (2" O'all Lg.)
    2 1/2" Lg. Bit Adapter for Power Tools
    Bit Adapter for Square Drive Tools    		—SteelPlastic Case00000000000
     
    1/4" and 5/16" Hex Shank Size
    351 Extension (2 3/8" Lg.)
    2 Drive Tools
    32 Bits    		Clutch 1/4" Hex Shank: 3/32", 1/8", 5/32", 3/16" (1" O'all Lg.)
    Hex 1/4" Hex Shank: 5/64", 3/32", 7/64", 1/8", 9/64", 7/32", 1/4" (1" O'all Lg.)
    Hex 5/16" Hex Shank: 5/32", 3/16" (1 1/4" O'all Lg.)
    Phillips 1/4" Hex Shank: No. 1, No. 2 (1" O'all Lg.)
    Pozidriv® 1/4" Hex Shank: No. 1, No. 2 (1" O'all Lg.)
    Slotted 1/4" Hex Shank: 3/16", 1/4", 9/32" (1" O'all Lg.)
    Square 1/4" Hex Shank: No. 1, No. 2, No. 3 (1" O'all Lg.)
    Torx 1/4" Hex Shank: T10, T15, T20, T25, T27, T30 (1" O'all Lg.)
    Torx 5/16" Hex Shank: T40, T45, T50 (1 1/4" O'all Lg.)    		—5 1/2" Lg. Tight-Clearance Ratcheting Bit Screwdriver
    5 3/8" Lg. Angled Tight-Clearance Ratcheting Bit Screwdriver    		SteelPlastic Case00000000000000
     
    For Hand Tools and Power Tools
     
    1/4" Hex Shank Size and 1/4" Quick-Change Hex Shank Size
    392 Adapters
    37 Bits    		Phillips Hex Shank: No. 0 (1" O'all Lg.)—1 ea.
    Phillips Hex Shank: No. 1, No. 3 (1" O'all Lg.)—2 ea.
    Phillips Hex Shank: No. 2 (1" O'all Lg.)—9 ea.
    Phillips Quick-Change Hex Shank: No. 1, No. 3 (2" O'all Lg.)—2 ea.
    Phillips Quick-Change Hex Shank: No. 2 (2" O'all Lg.)—8 ea.
    Slotted Hex Shank: 1/4" (1" O'all Lg.)—2 ea.
    Slotted Hex Shank: 3/16", 7/32", 9/32" (1" O'all Lg.)—1 ea.
    Slotted Quick-Change Hex Shank: 3/16" (2" O'all Lg.)—1 ea.
    Slotted Quick-Change Hex Shank: 7/32", 1/4" (2" O'all Lg.)—2 ea.    		1/4" Female Square Drive × 1/4" Female Hex Adapter
    3" Lg. Bit Adapter for Power Tools    		—SteelPlastic Caddy0000000000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    1010 BitsPhillips: No. 1, No. 2, No. 3 (2" O'all Lg.)
    Slotted: 1/8", 3/16", 7/32", 1/4" (2" O'all Lg.)
    Square: No. 1, No. 2, No. 3 (2" O'all Lg.)    		——SteelPlastic Caddy000000000000
    164 Adapters
    12 Bits    		External Hex: 5/16" (1 5/8" O'all Lg.)
    Phillips: No. 1, No. 2 (6" O'all Lg.)
    Phillips: No. 2, No. 3 (3 1/2" O'all Lg.)
    Pozidriv®: No. 2 (3 1/2" O'all Lg.)
    Torx: T15, T20 (3 1/2" O'all Lg.)
    Torx: T20, T25, T27, T30 (6" O'all Lg.)    		1/4" Male Square Drive × 1/4" Hex Shank Adapter
    3" Lg. Bit Adapter for Power Tools
    3/8" Male Square Drive × 1/4" Hex Shank Adapter
    6" Lg. Bit Adapter for Power Tools    		—SteelPlastic Case000000000000
    345 Adapters
    29 Bits    		External Hex: 3/8", 1/2" (1 3/4" O'all Lg.)
    External Hex: 5/16" (1 5/8" O'all Lg.)
    Phillips: No. 1, No. 2, No. 3 (2" O'all Lg.)
    Phillips: No. 1, No. 2, No. 3 (3 1/2" O'all Lg.)
    Phillips: No. 1, No. 2, No. 3 (6" O'all Lg.)
    Pozidriv®: No. 1, No. 2, No. 3 (2" O'all Lg.)
    Pozidriv®: No. 2 (3 1/2" O'all Lg.)
    Pozidriv®: No. 2 (6" O'all Lg.)
    Torx: T8, T9, T10 (2" O'all Lg.)
    Torx: T15, T20, T25, T27, T30 (6" O'all Lg.)
    Torx: T15, T20, T25, T30 (3 1/2" O'all Lg.)    		1/2" Male Square Drive × 1/4" Hex Shank Adapter
    1/4" Male Square Drive × 1/4" Hex Shank Adapter
    2 3/8" Lg. Bit Adapter for Power Tools
    3/8" Male Square Drive × 1/4" Hex Shank Adapter
    6" Lg. Bit Adapter for Power Tools    		—SteelPlastic Case000000000000
    5050 BitsHex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 3/16", 7/32", 1/4" (2" O'all Lg.)—1 ea.
    Hex (Inch): 5/32" (2" O'all Lg.)—2 ea.
    Hex (Metric): 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (2" O'all Lg.)—1 ea.
    Phillips: No. 0, No. 1, No. 2, No. 3, No. 4 (2" O'all Lg.)—1 ea.
    Slotted: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16" (2" O'all Lg.)—1 ea.
    Square: No. 0, No. 1, No. 2, No. 3, No. 4 (2" O'all Lg.)—1 ea.
    Torx: T5, T6, T7, T8, T9, T10, T15, T20, T27, T30, T40 (2" O'all Lg.)—1 ea.
    Torx: T25 (2" O'all Lg.)—2 ea.    		——SteelPlastic Case000000000000
     

    Square Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Square Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Square Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change

    Hex Shank

    Turn a selection of square screws with these bit sets. Well suited for woodworking tasks, they generate just enough force to drive screws into tough materials without risking cracks or splits. Also known as Robertson bits.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    8 BitsSquare: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)—2 ea.SteelPlastic Caddy000000000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    6 BitsSquare: No. 1, No. 2, No. 3 (2" O'all Lg.)—2 ea.SteelPlastic Caddy000000000000
     

    Torx Plus Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Torx Plus Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Torx Plus Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change Hex

    Shank

    With larger lobes, the bits in these sets deliver more torque than Torx bits without slipping and stripping the drive. They have a similar profile to Torx but are not recommended for use with standard Torx screws.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    No. of
    Pieces
    Components
    Included
    Bits Included
    Adapters Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    111 Adapter
    10 Bits    		Torx Plus: IP7, IP8, IP9, IP10, IP15, IP20, IP25, IP27, IP30, IP40 (1" O'all lg.)2 3/8" Lg. Bit Adapter for Power ToolsSteelPlastic Case00000000000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    1010 BitsTorx Plus: IP6, IP7, IP8, IP9, IP10, IP15, IP20, IP25, IP27, IP30 (2" O'all Lg.)—SteelPlastic Caddy000000000000
     

    Pozidriv® Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Pozidriv® Bit Sets, For Hand Tools.

    Hex Shank

    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Pozidriv® Bit Sets, For Power Tools.

    Quick-Change

    Hex Shank

    With more points of contact, the bits in these sets deliver more torque than Phillips bits. They are also less likely to slip and damage the screw head. Pozidriv® bits are often used to secure screws on European machinery and equipment.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    15 BitsPozidriv®: No. 1 (1" O'all Lg.)—5 ea.
    Pozidriv®: No. 2 (1" O'all Lg.)—8 ea.
    Pozidriv®: No. 3 (1" O'all Lg.)—2 ea.    		SteelPlastic Pouch0000000000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    15 BitsPozidriv®: No. 1 (2" O'all Lg.)—5 ea.
    Pozidriv®: No. 2 (2" O'all Lg.)—8 ea.
    Pozidriv®: No. 3 (2" O'all Lg.)—2 ea.    		SteelPlastic Pouch0000000000000
     

    Screw-Holding Ball-Tip Hex Bit Sets

    Image of Product. Retaining Ring. Front orientation. Screwdriver Bits. Screw-Holding Ball-Tip Hex Bit Sets.
    Image of Product. Front orientation. Screwdriver Bits. Screw-Holding Ball-Tip Hex Bit Sets.
    Image of Attribute. Front orientation. Contains Annotated.

    Retaining

    Ring

    Turn a variety of hex screws in hard-to-reach places with just one hand. The ball tip has a retaining ring that grips screws so they won't fall off as you fasten. Also, the ball tip engages the screw drive at an angle to squeeze into tight spots.
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Max. Access
    Angle
    Screw-Holding
    Mechanism
    Material
    Container
    Type
    Each
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    10 BitsHex (Inch): 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (2" O'all Lg.)
    Hex (Metric): 3 mm, 4 mm, 5 mm, 6 mm (2" O'all Lg.)    		20°Retaining RingSteelPlastic Caddy0000000000000
     

    Tri-Wing® Bit Sets

    Image of Product. Front orientation. Screwdriver Bits. Tri-Wing® Bit Sets.
    The bits in these sets turn Tri-Wing® screws, which are commonly found on electronics. They have offset wings that withstand high torque without slipping and damaging the drive.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    6 BitsTri-Wing®: No. 0, No. 1, No. 2, No. 3, No. 4, No. 5 (1" O'all Lg.)SteelPlastic Caddy0000000000000
     

    JIS Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. JIS Bit Sets, For Hand Tools.

    Hex Shank

    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. JIS Bit Sets, For Power Tools.

    Quick-Change

    Hex Shank

    Turn a variety of JIS (Japanese Industrial Standard) screws, which are commonly found in electronics assemblies. Similar in appearance to Phillips bits, JIS bits have sharper corners to deliver more torque without slipping and damaging the screw head.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    8 BitsJIS: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)—2 ea.SteelPlastic Caddy000000000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    8 BitsJIS: No. 0, No. 1, No. 2, No. 3 (2" O'all Lg.)—2 ea.SteelPlastic Caddy00000000000
     

    Screw-Holding Torx Bit Sets

    Image of Product. Front orientation. Screwdriver Bits. Screw-Holding Torx Bit Sets.
    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Screw-Holding Torx Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Screw-Holding Torx Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change Hex

    Shank

    When you've only got one free hand to fasten, reach for these Torx bits. A tapered tip wedges deep into the screw head, so it won't fall off while you fasten. The bits in these sets are useful when working above crevices that screws could slip into. Also known as Torx-Align bits.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Screw-Holding
    Mechanism
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    12 BitsTorx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)Wedge TipSteelPlastic Caddy0000000000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    10 BitsTorx: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30 (2" O'all Lg.)Wedge TipSteelPlastic Caddy0000000000000
     

    Slotted Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Slotted Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Slotted Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change

    Hex Shank

    Stock up on a selection of slotted bits to turn the most common screw sizes. These versatile bits handle everything from installing outlet covers and switch plates to fastening screws in sheet metal. However, since they only have two points of contact, they may slip out of the fastener head if you use too much force.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    8 BitsSlotted: 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32" (1" O'all Lg.)SteelPlastic Caddy0000000000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    8 BitsSlotted: 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32" (2" O'all Lg.)SteelPlastic Caddy000000000000
     

    Sure-Grip Phillips Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Sure-Grip Phillips Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Sure-Grip Phillips Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change

    Hex Shank

    Grooves on the tip bite into Phillips screw slots to prevent slipping. The bits in these sets align easily with fasteners and deliver more torque than slotted bits.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Material
    Tip
    Style
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    6 BitsPhillips: No. 1, No. 2, No. 3 (1" O'all Lg.)—2 ea.SteelGroovedPlastic Pouch000000000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    6 BitsPhillips: No. 1, No. 2, No. 3 (2" O'all Lg.)—2 ea.SteelGroovedPlastic Pouch0000000000000
     

    Tamper-Resistant Torx Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Tamper-Resistant Torx Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Tamper-Resistant Torx Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change Hex

    Shank

    Turn a variety of tamper-resistant Torx screws on electronic enclosures and other access-controlled equipment. The bits in these sets have six lobes that withstand high pressure without stripping the drive. Also known as pin-in-Torx bits.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    7 BitsTamper-Resistant Torx: T7, T8, T9, T10, T15, T20, T25 (1" O'all Lg.)SteelPlastic Case0000000000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    10 BitsTamper-Resistant Torx: T7, T8, T9, T10, T15, T20, T25, T27, T30, T40 (2" O'all Lg.)SteelPlastic Caddy000000000000
     

    Torq-Set® Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Torq-Set® Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Torq-Set® Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change Hex

    Shank

    Similar to Phillips bits, but with offset wings for a better grip. The bits in these sets are less likely to slip out of the screw head and damage the fastener.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    10 BitsTorq-Set®: No. 4, No. 6, No. 8, No. 10, 1/4" (1" O'all Lg.)—2 ea.Steel—00000000000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    10 BitsTorq-Set®: No. 4, No. 6, No. 8, No. 10, 1/4" (1 1/4" O'all Lg.)—2 ea.SteelPlastic Caddy0000000000000
     

    Drilled Spanner Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Drilled Spanner Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Drilled Spanner Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change

    Hex Shank

    The bits in these sets turn drilled-spanner screws. With two thin contact points, they can't deliver a lot of torque, so they may slip if you use too much force. Also known as pig-nose bits.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    6 BitsDrilled Spanner for 0.134" Ctr.-to-Ctr.: No. 6 (1" O'all Lg.)—2 ea.
    Drilled Spanner for 0.164" Ctr.-to-Ctr.: No. 8 (1" O'all Lg.)—2 ea.
    Drilled Spanner for 0.198" Ctr.-to-Ctr.: No. 10 (1" O'all Lg.)—2 ea.    		SteelPlastic Pouch00000000000000
     
    5/16" Hex Shank Size
    7 BitsDrilled Spanner for 0.162" Ctr.-to-Ctr.: No. 6 (1 1/4" O'all Lg.)—2 ea.
    Drilled Spanner for 0.186" Ctr.-to-Ctr.: No. 8 (1 1/4" O'all Lg.)—2 ea.
    Drilled Spanner for 0.209" Ctr.-to-Ctr.: No. 10 (1 1/4" O'all Lg.)—2 ea.
    Drilled Spanner for 0.223" Ctr.-to-Ctr.: No. 12 (1 1/4" O'all Lg.)—1 ea.    		SteelPlastic Pouch000000000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    4 BitsDrilled Spanner for 0.108" Ctr.-to-Ctr.: No. 4 (2" O'all Lg.)—1 ea.
    Drilled Spanner for 0.162" Ctr.-to-Ctr.: No. 6 (2" O'all Lg.)—1 ea.
    Drilled Spanner for 0.186" Ctr.-to-Ctr.: No. 8 (2" O'all Lg.)—1 ea.
    Drilled Spanner for 0.209" Ctr.-to-Ctr.: No. 10 (2" O'all Lg.)—1 ea.    		SteelPlastic Pouch000000000000
     

    Hex Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Hex Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Hex Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change Hex

    Shank

    Keep a selection of hex bits on hand to turn multiple screw sizes. With six contact points, hex bits handle more torque than slotted and Phillips bits without slipping and stripping the drive.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    7 BitsHex: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)Steel—0000000000000
    12 BitsHex: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" (1" O'all Lg.)SteelPlastic Caddy000000000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    10 BitsHex (Inch): 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (2" O'all Lg.)
    Hex (Metric): 3 mm, 4 mm, 5 mm, 6 mm (2" O'all Lg.)    		SteelPlastic Caddy000000000000
     

    Torx Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Torx Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Torx Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change

    Hex Shank

    Get a grip with less slip. The bits in these sets have a six-lobe shape that grips fasteners so they won't slip and damage the drive. Also known as star bits.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    No. of
    Pieces
    Components
    Included
    Bits Included
    Adapters Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    77 BitsTorx: T10, T15, T20, T25, T30, T40 (1" O'all Lg.)—SteelPlastic Caddy0000000000000
    231 Adapter
    22 Bits    		Torx: T5, T6, T7, T8, T9 (1" O'all Lg.)—1 ea.
    Torx: T10, T15, T20, T25, T27, T30, T40 (1" O'all Lg.)—2 ea.
    Torx: T45, T50, T55 (1 3/8" O'all Lg.)—1 ea.    		2 3/8" Lg. Bit Adapter for Power ToolsSteelPlastic Caddy000000000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    1111 BitsTorx: T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40 (2" O'all Lg.)—SteelPlastic Caddy000000000000
     

    Ball-Tip Hex Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Ball-Tip Hex Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Ball-Tip Hex Bit Sets, For Power Tools.
    Image of Attribute. Front orientation. Contains Annotated.

    Hex Shank

    Quick-Change

    Hex Shank

    Turn a variety hex screws even when you can't access them head on. A ball tip with six points of contact engages the drive at an angle without slipping. These bits are handy for reaching screws in corners and underneath machinery.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Max. Access
    Angle
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    9 BitsHex: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm (1" O'all Lg.)
    Hex: 8 mm, 10 mm, 12 mm (1 1/2" O'all Lg.)    		25°SteelPlastic Caddy0000000000000
    12 BitsHex: 5/16", 3/8", 1/2" (1 1/2" O'all Lg.)
    Hex: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (1" O'all Lg.)    		25°SteelPlastic Caddy000000000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    9 BitsHex: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, 12 mm (3" O'all Lg.)25°SteelPlastic Caddy000000000000
    12 BitsHex: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 1/2" (3" O'all Lg.)25°SteelPlastic Caddy000000000000
     

    Tamper-Resistant Hex Bit Sets

    Image of Product. Hex Shank. Front orientation. Screwdriver Bits. Tamper-Resistant Hex Bit Sets, For Hand Tools.
    Image of Product. Quick-Change Hex Shank. Front orientation. Screwdriver Bits. Tamper-Resistant Hex Bit Sets, For Power Tools.

    Hex Shank

    Quick-Change Hex

    Shank

    Turn a variety of tamper-resistant hex screws on electronic enclosures and other access-controlled equipment. Their six contact points deliver more torque than slotted and Phillips bits without slipping and stripping the drive. Also known as pin-in-hex or pin-in-socket bits.
    Hex Shank—Also known as insert bits, these snap into hand tools. If you want to use them with power tools, attach a bit adapter (not included).
    Quick-Change Hex Shank—Lock these bits directly into power tools. They won't wobble as much as bits paired with an adapter, so they are the best choice for high-precision tasks.
    Steel—Best for dry environments, since moisture will cause these bits to rust.
    Components
    Included
    Bits Included
    Material
    Container
    Type
    Each
    For Hand Tools
     
    1/4" Hex Shank Size
    6 BitsTamper-Resistant Hex: 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)SteelPlastic Caddy0000000000000
    11 BitsTamper-Resistant Hex: 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8" (1" O'all Lg.)SteelPlastic Pouch000000000000
     
    For Power Tools
     
    1/4" Quick-Change Hex Shank Size
    6 BitsTamper-Resistant Hex: 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm (2" O'all Lg.)SteelPlastic Caddy000000000000
    8 BitsTamper-Resistant Hex: 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (2" O'all Lg.)SteelPlastic Caddy000000000000
     
    back to top