Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.

From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications.

The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.

Route and insulate wire using these square fiberglass tubes, which fit better along edges and around corners than round tubes.

Easily turn these rectangular tubes into parts for transformers and switchgears using high-speed tooling.

Applications for these tubes include jackets, seals, and insulation.

Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this steel bolt-together framing to build guards, tables, and racks.

Create posts of varying lengths.

These rails have continuous T-slots for attaching fittings. Use this versatile framing to configure machine guards, enclosures, carts, and workstations.

Connect T‐slotted rails and reinforce joints for structural stability.

Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.

Pivots provide smooth motion at the junction between two T-slotted rails.

Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.

Stay organized with hooks, bin boxes, shelves, and tool holders that work with T-slotted framing.

Get projects off to a quick start with these kits that include the components you need to build simple structures, such as workbenches, workstations, and stands.

Bumpers and surface guards cushion doors and other moving parts to prevent damage and reduce noise.

Distribute compressed air, hydraulic fluid, or water from a single supply to multiple locations.

Route wires, cables, and tubing along T‐slotted rails.

Add a convenient grip to steer carts or open and close doors, windows, and drawers made of T-slotted framing.

For repetitive workholding, mount these clamps to T-slotted framing to hold and release parts.

Add electrical outlets to workstations with these outlet strips that mount on T-slotted rails.

Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.

Up to two times the height of regular strut channel, this high-profile channel is stronger than regular strut channel.

This welded, one-piece strut channel combines two strut channels back-to-back.

For compatibility with quick-connect clamps to secure pipe and conduit without screws and tools, this strut channel has narrow slotted holes.

Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.

Attach strut channel at any point on a threaded rod without taking apart your assembly.

These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.

Provide a stable, nonmarring base for strut channel legs.

Serrated grooves grip the lip of the channel.

Connect two channels to create a stacked channel.

Push these nuts into place rather than threading them onto a fastener.

In addition to serrated grooves for gripping the lip of the channel, these nuts have wings for easy positioning.

Insert these nuts into the long open side of strut channel and twist to secure. A built-in washer enables one-handed installation.

Run wires through the hollow stud of these nuts or use them as vents.

Quickly fasten threaded rod to strut channel. Snap these hinged nuts onto a threaded rod, then slip the head through a strut channel hole.

Add hardware to strut channel without having to hold the washer in place or reach inside the channel.

Keep hardware centered in the strut channel slot.

Brackets mount on the outside of strut channel to allow trolley movement.

Cover rough ends of strut channel.

Create a four-sided raceway for cable, or give a more finished look to strut channel structures.

Hold two pieces of strut channel together so they can smoothly open or close.

Block strut channel ends to keep trolleys, slides, and other hanging components from rolling out.

For quick mounting of components, these hangers snap into strut channels for a strong hold and easy repositioning.

A flat or half-round shape keeps water from pooling on these strut rails. Unlike a traditional C-shape strut, these rails prevent the buildup of bacteria and debris, making them ideal for use in sanitary or food production environments.

Support and protect conduit by mounting it to strut channel.

These tubes are easier to label and stack than round tubes. To adjust the length, push the ends of the tube together or pull them apart.

Less likely to tip over or roll around during shipping compared to round and square tubes, these tubes are wider and flatter. Push the ends together or pull them apart to adjust the length.

Because of their square shape, these tubes won't roll away. They can be stacked, and the flat surface is easier to label than a round surface.

Quickly push to secure sliding doors. An edge-pull handle fits where traditional handles don’t and makes these latches easy to open.

Pull the edge of the lock to open your door—the low-profile grip fits in tight spaces. These locks are a convenient alternative to cam and draw locks since they don’t require you to turn a cam or pull a latch.