Squeeze-to-Measure Bottles

Filter by

Capacity

Dispensing Type

Graduations

Contents Message

Lid Color

Material

Color

Diameter

Height

Lid Material

Label Type

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Mouth OD

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Lid Construction

RoHS

REACH

Mouth ID

Nozzle ID

Maximum Temperature

Width

Nozzle Length

Cup Capacity

Chamber Type

Depth

44 Products

Squeeze Bottles

Style E

Squeeze these bottles to dispense liquid.

Style E—Style E have a nozzle that twists closed to keep contents sealed inside.

											Each
Style	Capacity	Dia.	Ht.	Mouth OD	Graduations	Color	Lid Color	Material	Lid Material		1-11	12-Up
E	24 fl. oz. (750 ml)	2 7/8"	10 1/4"	2 1/2"	2 oz., 50 ml	Semi-Clear White	Semi-Clear White	LDPE	HDPE	4370T48	00000	00000
E	32 fl. oz. (1,000 ml)	3 1/4"	10 3/8"	2 1/2"	2 oz.	Semi-Clear White	Semi-Clear White	LDPE	HDPE	4370T15	0000	0000

Replacement Lids


Open Nozzle	Twist-Close Nozzle

	For Capacity	Food Industry Std.		Each
Open Nozzle



	C, E	16 fl. oz., 24 fl. oz., 32 fl. oz. (500 ml, 750 ml, 1,000 ml)	NSF/ANSI 2	4370T81	00000


	Twist-Close Nozzle



			C, E	16 fl. oz., 24 fl. oz., 32 fl. oz. (500 ml, 750 ml, 1,000 ml)	—	4370T82	0000

Graduated Squeeze Bottles with Angled Nozzle


Style A	Style B

Graduations on these bottles make volume measurements simple. Also known as wash bottles, they dispense liquid at an angle to rinse labware or clean surfaces. A vent helps equalize the pressure inside, so liquid doesn’t build up and drip from the nozzle.

Style B—Style B have a wider mouth than Style A, so they are easier to fill without a funnel.

												Each		Package
	Capacity	Dia.	Ht.	Mouth OD	Graduations, ml	Color	Material	Lid Material	Lid Construction	Autoclavable	Choose a Lid Color		Each	Pkg. Qty.		Pkg.
Style A



		4 fl. oz. (125 ml)	2"	6"	7/8"	5	Semi-Clear White	LDPE	Polypropylene	Vented	No	Blue, Green, Red, Semi-Clear White, Yellow	1568N15	00000	12	1568N16	000000


		8 fl. oz. (250 ml)	2 1/2"	7 1/2"	7/8"	10	Semi-Clear White	LDPE	Polypropylene	Vented	No	Blue, Green, Red, Semi-Clear White, Yellow	1568N7	0000	12	1568N17	00000
		32 fl. oz. (1,000 ml)	3 5/8"	11"	1 3/8"	50	Semi-Clear White	LDPE	Polypropylene	Vented	No	Blue, Green, Red, Semi-Clear White, Yellow	1568N19	0000	12	1568N21	00000
		16 fl. oz. (500 ml)	2 7/8"	8 5/8"	7/8"	25	Semi-Clear White	LDPE	Polypropylene	Vented	No	Blue, Green, Red, Semi-Clear White, Yellow	1568N8	0000	12	1568N18	00000


		Style B



				32 fl. oz. (1,000 ml)	3 3/8"	11"	2"	50	Semi-Clear White	LDPE	Polypropylene	Vented	No	Blue, Green, Red, Semi-Clear White, Yellow	1568N13	0000	12	1568N14	00000


				16 fl. oz. (500 ml)	2 7/8"	9"	2"	25	Semi-Clear White	LDPE	Polypropylene	Vented	No	Blue, Green, Red, Semi-Clear White, Yellow	1568N11	0000	12	1568N12	00000

Squeeze Bottles with Long-Reach Nozzle


Style C	Style E

Dispense adhesives, lubricants, and other liquids into hard-to-reach spots. These bottles have a long nozzle for accessing machine interiors and awkward angles.

When choosing a bottle, consider the size of the nozzle. The larger the nozzle ID, the more liquid you can dispense with each squeeze, which is helpful for viscous liquids. Nozzles with a smaller ID create a more focused stream at a higher pressure, which is good for rinsing surfaces and dislodging debris.

Plastic Nozzle—Plastic nozzles are flexible, so they’re easy to maneuver around obstacles.

Guide Wire—Those with a guide wire hold their shape when you bend them, creating any angle you need.

Push-Pull Cap—Push-pull caps open and close easily with one hand to prevent accidental spills or drips.

LDPE—LDPE bottles are soft, flexible, and easy to squeeze.

HDPE—HDPE are less permeable than LDPE bottles, so they hold up better to oil or lubricant. They’re also more rigid, so they’re harder to squeeze.

			Nozzle
	Style	Capacity	Lg.	ID	Dia.	Ht.	Color	Lid Color	Lid Material		Each
Plastic Nozzle with Push-Pull Cap







				LDPE

				C	4 fl. oz. (125 ml)	2 1/2"	0.03"	1 3/4"	5 3/4"	Semi-Clear White	Blue	TPE	1044K109	00000


				C	4 fl. oz. (125 ml)	2 1/2"	0.09"	1 3/4"	5 3/4"	Semi-Clear White	Red	TPE	1044K122	0000
				C	4 fl. oz. (125 ml)	5 1/2"	0.03"	1 3/4"	5 3/4"	Semi-Clear White	Blue	TPE	1044K103	0000
				C	4 fl. oz. (125 ml)	5 1/2"	0.09"	1 3/4"	5 3/4"	Semi-Clear White	Red	TPE	1044K113	0000
				C	4 fl. oz. (125 ml)	12"	0.03"	1 3/4"	5 3/4"	Semi-Clear White	Blue	TPE	1044K106	0000
				C	4 fl. oz. (125 ml)	12"	0.09"	1 3/4"	5 3/4"	Semi-Clear White	Red	TPE	1044K118	0000


				Plastic Nozzle with Guide Wire







								HDPE

								E	32 fl. oz. (1,000 ml)	14"	1/4"	3 3/8"	10"	Semi-Clear White	Clear	Polypropylene	1044K126	00000

Dropper Squeeze Bottles


Style A	Style C

Squeeze out liquids one droplet at a time.

Squeeze Bottles with Tethered Cap


Style A	Style C

Style A—Style A have a long nozzle that lets you place droplets accurately, even in hard-to-reach places.

												Each
	Capacity	Dia.	Ht.	Mouth OD	Graduations, ml	Color	Lid Color	Material	Lid Material	Autoclavable		1-11	12-Up
Style A



		1.66 fl. oz. (50 ml)	1 1/2"	5 1/4"	3/4"	10	Semi-Clear White	Semi-Clear White	LDPE	LDPE	No	5525T3	00000	00000


		3.33 fl. oz. (100 ml)	1 7/8"	5 7/8"	3/4"	20	Semi-Clear White	Semi-Clear White	LDPE	LDPE	No	5525T4	0000	0000


		Style C



				1.66 fl. oz. (50 ml)	1 3/8"	4 1/8"	3/4"	10	Semi-Clear White	Semi-Clear White	LDPE	LDPE	No	5525T115	0000	0000


				3.33 fl. oz. (100 ml)	1 7/8"	5"	3/4"	20	Semi-Clear White	Semi-Clear White	LDPE	LDPE	No	5525T116	0000	0000

Squeeze-to-Measure Bottles


Style A	Style B

Squeeze these bottles to dispense liquid into an attached, graduated container—no measuring cup needed.

Style A

Style A have a cup that slides up or down their dispensing tube. Align the top of the tube with a graduation, then squeeze the bottle to fill the cup. When you let go, any liquid above the mark is drawn back inside.

				Mouth			Cup				Lid					Each		Package
	Capacity	Dia.	Ht.	OD	ID	Cup Capacity	Graduations, ml	Material	Graduated	Color	Type	Material	Color	Autoclavable	Max. Temp.		Each	Pkg. Qty.		Pkg.
LDPE



		8 fl. oz. / 250 ml	2 3/8"	11 1/8"	1 1/8"	3/4"	0.84 fl. oz. / 25 ml	5	PMP	Yes	Semi-Clear White	Threaded	LDPE	Red	No	Not Rated	14925T1	000000	10	14925T4	0000000


		16 fl. oz. / 500 ml	2 7/8"	12 3/4"	1 1/8"	3/4"	0.84 fl. oz. / 25 ml	5	PMP	Yes	Semi-Clear White	Threaded	LDPE	Red	No	Not Rated	14925T2	00000	10	14925T5	000000
		32 fl. oz. / 1,000 ml	3 5/8"	13 7/8"	1 1/8"	3/4"	0.84 fl. oz. / 25 ml	5	PMP	Yes	Semi-Clear White	Threaded	LDPE	Red	No	Not Rated	14925T3	00000	10	14925T6	000000

Style B

Style B have two chambers, each with their own lid. Also known as Bettix bottles, they’re often used for diluting concentrated cleaning agents or automotive fluids. Squeeze the storage chamber until the measuring chamber is filled to the level you need.

	Storage Chamber				Measuring Chamber									Lid
	Capacity	Mouth OD	Mouth ID	Graduations	Capacity	Mouth OD	Mouth ID	Graduations	Wd.	Dp.	Ht.	Graduated	Color	Type	Material	Color	Autoclavable	Max. Temp., ° F		Each
HDPE



		8 fl. oz. / 250 ml	7/8"	7/16"	1 oz., 50 ml	1/2 fl. oz. / 15 ml	7/8"	7/16"	1/4 oz.	3 1/4"	1 1/2"	6 3/8"	Yes	Semi-Clear White	Threaded	Polypropylene	White	No	120	14925T7	00000


		16 fl. oz. / 500 ml	1"	5/8"	1 oz., 50 ml	1 fl. oz. / 30 ml	1"	5/8"	1/2 oz., 15 ml	4 3/8"	2"	7 5/8"	Yes	Semi-Clear White	Threaded	Polypropylene	White	No	120	14925T8	0000
		32 fl. oz. / 1,000 ml	1"	5/8"	2 oz., 100 ml	1 fl. oz. / 30 ml	1"	5/8"	1/2 oz., 15 ml	5 1/4"	2 1/2"	9 1/8"	Yes	Semi-Clear White	Threaded	Polypropylene	White	No	120	14925T9	0000
		64 fl. oz. / 2,000 ml	1 3/8"	1"	—	4 fl. oz. / 120 ml	1"	5/8"	1/2 oz., 10 ml	6 7/8"	3 1/8"	10 3/8"	Yes	Semi-Clear White	Threaded	Polypropylene	White	No	120	14925T11	0000

Choose-a-Label Squeeze Bottles with Angled Nozzle

Labels on these bottles help you quickly identify their contents. Also known as wash bottles, they dispense at an angle.

Squeeze Bottles with NFPA Diamond, Separate Nozzle and Fill Cap

Image of Product. Front orientation. Squeeze Bottles. Choose-a-Label Squeeze Bottles with Angled Nozzle, Squeeze Bottles with NFPA Diamond, Separate Nozzle and Fill Cap.

Bottles with an NFPA Diamond are labeled with colors, numbers, and abbreviations designed by the National Fire Protection Association to help first responders quickly recognize hazards.

Bottles with a separate nozzle and fill cap help you avoid drips while you refill them. The nozzle is molded into the side of the bottle instead of the cap, so the dispensing tube stays inside the bottle.

Blank—Bottles with a blank label have space to write in the contents and safety information.

GHS Standards—Bottles with labels that meet GHS standards are clearly marked with their contents and key hazard information, including health risks. The Globally Harmonized System includes pictograms that were designed by the United Nations to clearly identify chemicals as flammable, toxic, corrosive, and more.

															Each
Contents Message	Language	Capacity	Dia.	Ht.	Mouth OD	Graduations, ml	Color	Lid Color	Material	Lid Material	Lid Construction	Specs. Met	Autoclavable		1-9	10-Up



	Acetone	English	16 fl. oz. (500 ml)	3"	6 1/2"	1 1/2"	100	Semi-Clear White	Red	LDPE	Polypropylene	Unvented	GHS Standards	No	14805T133	000000	00000


	Blank	English	16 fl. oz. (500 ml)	3"	6 1/2"	1 1/2"	100	Semi-Clear White	Semi-Clear White	LDPE	Polypropylene	Unvented	—	No	14805T134	00000	0000
	Distilled Water	English	16 fl. oz. (500 ml)	3"	6 1/2"	1 1/2"	100	Semi-Clear White	Blue	LDPE	Polypropylene	Unvented	GHS Standards	No	14805T135	00000	0000
	Ethanol	English	16 fl. oz. (500 ml)	3"	6 1/2"	1 1/2"	100	Semi-Clear White	White	LDPE	Polypropylene	Unvented	GHS Standards	No	14805T136	00000	0000
	Isopropanol	English	16 fl. oz. (500 ml)	3"	6 1/2"	1 1/2"	100	Semi-Clear White	Yellow	LDPE	Polypropylene	Unvented	GHS Standards	No	14805T137	00000	0000
	Methanol	English	16 fl. oz. (500 ml)	3"	6 1/2"	1 1/2"	100	Semi-Clear White	Green	LDPE	Polypropylene	Unvented	GHS Standards	No	14805T138	00000	0000

Squeeze Bottles with Angled Nozzle

Style E

Also known as wash bottles, these bottles dispense liquids at an angle. They are often used to rinse labware or clean work surfaces.

Squeeze Bottles with Separate Nozzle and Fill Cap

Style E

Style E—Styles D and E have a nozzle on the side instead of the lid, so it’s easier to avoid drips when you refill these bottles.

													Each
	Capacity	Dia.	Ht.	Mouth OD	Graduations, ml	Color	Material	Lid Material	Lid Construction	Autoclavable	Choose a Lid Color		1-11	12-Up
Style E



		16 fl. oz. (500 ml)	3"	6 1/2"	1 1/2"	100	Semi-Clear White	LDPE	Polypropylene	Unvented	No	Blue, Green, Red, Semi-Clear White, White, Yellow	4527T99	00000	00000