From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications.

The textured surface hides fingerprints and dents. This material is widely used in decorative applications, such as partitions and handrails.

This material has tighter tolerances than standard 304 stainless steel.

Compare the appearance choices of our 304 stainless steel with these convenient selector packs.

Widely used for fabricating fittings and fasteners, 303 stainless steel machines quickly without sticking to cutting tools.

Able to withstand repeated stress and wear, 301 stainless steel has the strength required for applications such as springs and fasteners.

The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.

This material machines faster with less wear on cutting tools than standard 316 stainless steel. It's also called Prodec and Project 70+.

These selector packs contain one 1-3/4"×3"×1/16" thick piece of 316 stainless steel in the following finishes: brushed #4, mirror-like #8, and unpolished.

Precision ground on the top and bottom to a tight tolerance.

The addition of vanadium and carbon gives 420V stainless steel excellent wear resistance. It can replace tool steel in highly abrasive applications.

Also called flat stock, these precision-ground bars are held to tight thickness and width tolerances.

One of the hardest types of stainless steel after heat treating, 440C offers excellent wear and abrasion resistance. It's often used for bearings, valves, and knife blades.

With excellent strength and wear resistance, S30V stainless steel is a preferred material for knives and cutlery.

With a higher chromium content than 15-5 PH stainless steel, this high-strength 17-4 PH offers better corrosion resistance. It is also known as 630 stainless steel.

This material is hardened for improved strength and wear resistance.

Widely used to fabricate fasteners and engine components, A286 will maintain its strength as temperatures rise.

309/310 stainless steel has high levels of chromium and nickel to provide good corrosion resistance at elevated temperatures. It's often used in heat exchangers and furnaces.

Able to support heavier loads than plank grating, bar grating is good for trenches, mezzanines, walkways, work platforms, and floors.

Secure grating to your support structure.

Use plank grating for platforms, stair treads, ramps, and decks.

Metal plates are more durable than plastic plates.

Characters are imprinted and filled with black enamel for contrast.

Specify a starting number. Embossing produces raised characters similar to a license plate. This is useful in washdown applications where engraved or stamped impressions may fill with water or wear away.

Embossing produces raised characters similar to a license plate. This is useful in washdown applications where engraved or stamped impressions may fill with water or wear away.

Identify equipment by engraving or stamping one of these sturdy metal tags and hanging it with a wire.

Metal tags are more durable than plastic tags.

Metal tags are more durable than plastic tags.

Cut this stock into custom shapes to fit your application.

Cut this shim stock into custom shapes to fit your application. Stock is made of layers of material bonded with adhesive; remove layers with a utility knife until you get the thickness you need.

Level dies, plates, presses, and other machine tools—this shim tape conforms to curves and uneven surfaces.

Close off openings in structures while allowing air to pass through.

Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.

Also known as angle brackets.

The two-piece design accommodates a wide range of panel thicknesses.

Position parts exactly where they’re needed for workers, robots, and other machines to easily access them.

Add a mounting plate to your U-bolt for a more secure hold at the mounting surface.

Also known as muffler clamps, these U-bolts have a rounded mounting plate that fully surrounds pipe, conduit, and tubing for a secure fit.

Fasten these brackets to ceilings, walls, beams, and joists to hang threaded rod.

Good for use as ladder rungs, cut these steps to size with a metal-cutting saw and weld them in place.

Install components and make electrical connections on a panel, then mount the panel in your enclosure. Using a panel means you won’t need to make holes in the body of your enclosure, which could let in dust and water.

Close off unused switches and outlets.

Keep switches and outlets under cover for protection from dust and dirt. These stainless steel plates resist corrosion and have a sealing gasket to keep out moisture.

Hide gaps around your handles.

Use these mounting plates to reinforce the door around your handle to guard against forced entry.

Cover the gap between your door and frame to protect the latch bolt from being pried open.

All of these strike plates can be used with door handles and knobs.

Magnetic force holds doors closed.