Made from stainless steel, these rollers are suitable for washdown applications. They have a standard 1.9" diameter to fit most roller conveyors.

These rollers have diameters 1 3/4" and below.

Choose the width you need from 6" to 60" in 1/16" increments.

A double-sealed ball keeps out dirt and debris, and side vents expel contaminants.

These ball transfers have capacities up to 2,200 lbs.

The ball in these transfers is spring-loaded to absorb impact.

To keep out dirt and debris, these flange-mount ball transfers have a double-sealed ball and side vents that expel contaminants.

The flange has mounting holes for fastening.

Transfers recess into the mounting surface for a low profile.

These threaded track rollers are made of materials that prevent corrosion in wet environments.

Built to handle high speeds for their size. These track rollers have an outer ring that supports higher speeds than standard-sized track rollers.

Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end.

Support and guide loads on angle rails in food, pharmaceutical, and other sanitary environments. Also known as yoke-style cam followers, these track rollers offer more mounting flexibility than threaded alternatives and are typically mounted on shafts and clevis rod ends.

Made of 303 stainless steel, these wheels are the best choice for washdown applications such as food-processing areas.

Keep sliding doors and panels from damaging walls and door frames.