Stainless Steel Sealing Washers

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Seal Color Seal Color

	Black		Red
	Green		Blue

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

DFARS Specialty Metals
Compliant

	Maximum Temperature Maximum Temperature

	Minimum Temperature Minimum Temperature

	Maximum Pressure for Gases Maximum Pressure for Gases

	Seal Hardness Seal Hardness

	Maximum Pressure for Fluids Maximum Pressure for Fluids

10,000 psi or greater

	Length Length

	Shape Shape


Ring	Round

Disc	Slotted

Keyed	Rectangle

Sheet and Bar	Made to Order

	Split Lock Washer Type Split Lock Washer Type


Standard	Curved

Wave

Forward

How can we improve?

7,968 Products

Washers

General Purpose Washers

Use these washers to evenly distribute the load under bolt or screw heads and nuts when fastening. They can also act as spacers.

Metric General Purpose Washers

Use these metric washers to evenly distribute the load under bolt or screw heads and nuts when fastening. They can also act as spacers.

Oversized Washers

Compared to our general purpose washers, these have exaggerated diameters and/or thicknesses for covering oversized holes or for use as spacers and levelers.

Metric Oversized Washers

Compared to our general purpose washers, these have exaggerated diameters and/or thicknesses. Use them to cover oversized holes, hold heavy fastening loads, or as spacers and levelers.

Mil. Spec. Washers

Choose these washers for their adherence to strict military standards for material and construction.

SAE Washers

SAE washers generally have a smaller ID and OD than USS washers.

ASME Washers

Also known as Type B washers, ASME washers are available in narrower and wider diameters than SAE and USS washers.

USS Washers

USS washers generally have a larger ID and OD than SAE washers.

Washers for Blind Rivets

Also known as backup washers, these are for use with blind rivets for extra support when fastening into soft material.

Washer Blanks

Punch a hole to create a custom washer.

Countersunk Washers

Flat and oval head screws sit flush within these washers for a neat, finished appearance.

Metric Countersunk Washers

Flat and oval head screws sit flush within these metric washers for a neat, finished appearance.

Finishing Countersunk Washers

Metric Finishing Countersunk Washers

Clipped Washers

Clipped to fit where standard washers can't, these won't rotate when you position the flat edge against a flat surface.

Oversized Clipped Washers

With greater diameters and/or thicknesses than general purpose washers, these washers cover oversized holes or act as spacers and levelers. Clipped to fit where standard washers can’t, they won’t rotate when you position the flat edge against a flat surface.

Double-Clipped Washers

Clipped on both sides to fit where standard washers can't, these won't rotate when you position the flat edges against a flat surface.

Square Washers

Square washers fit into slots and channels and have flat sides to keep them from rotating.

Sleeve Washers for Soft Material

Reinforce holes in soft material to keep them from collapsing around screws.

Easy-Install Slotted Washers

A slot in the side allows you to install and remove these washers without completely disassembling your joint.

Angled-Edge Washers for
Toggle Clamp Holding Screws

Use on clamps with open arms to keep the holding screw in place.

Adhesive-Back Washers

Peel the backing off these washers and stick them onto a surface for easy mounting and assembly.

Rectangular Washers

Narrower than clipped and square washers, these washers are an excellent choice for slots, channels, and other tight spaces.

Washers for Square-Neck Bolts

A square hole prevents these washers from turning with the bolt or shaft.

Split Lock Washers

As a screw is tightened, these washers flatten to add tension to the joint, counteracting fatigue around the joint from small amounts of vibration.

Metric Split Lock Washers

As a screw is tightened, these metric washers flatten to add tension to the joint, counteracting fatigue around the joint from small amounts of vibration.

Mil. Spec. Split Lock Washers

Choose these washers for their adherence to strict military standards for material and construction.

Metric Split Lock Washers for Socket Head Screws

Also known as high-collar lock washers, these metric washers have smaller outside diameters than standard split lock washers to fit neatly under socket head cap screws.

Split Lock Washers for Socket Head Screws

Also known as high-collar lock washers, these have a smaller outside diameter than standard split lock washers to fit neatly under socket head cap screws.

Oversized Split Lock Washers

Compared to standard split lock washers, these are thicker and have larger outside diameters.

Tooth Lock Washers

External-Tooth Lock Washers

Teeth on the outside edge of the washer bite into the screw head and joint for a tight grip.

Metric External-Tooth Lock Washers

Teeth on the outside edge of these metric washers bite into the screw head and joint for a tight grip.

Mil. Spec. External-Tooth Lock Washers

Choose these washers for their adherence to strict military standards for material and construction.

Tight-Grip External-Tooth Lock Washers

The teeth on these washers bite further into the screw head and joint than standard external-tooth washers to provide a stronger hold.

Countersunk External-Tooth Lock Washers

The teeth on these washers firmly grip heads of 82° flat head countersunk screws.

Internal-Tooth Lock Washers

Internal teeth dig into the screw head while the smooth outside edge won't snag objects. Use with fasteners that have small heads, such as fillister and cheese head screws.

Metric Internal-Tooth Lock Washers

Internal teeth dig into the screw head while the smooth outside edge won't snag objects. Use with metric fasteners that have small heads, such as fillister and cheese head screws.

Mil. Spec. Internal-Tooth Lock Washers

Choose these washers for their adherence to strict military standards for material and construction.

Internal-/External-Tooth Lock Washers

The combination of internal and external teeth boosts gripping power to maintain a tight hold and provide more vibration resistance than other tooth lock washers. Use with fasteners that have heads large enough to make contact with the external teeth, such as pan, button, and binding head screws.

Spring Lock Washers

Belleville Spring Lock Washers

Also known as conical washers, these have a slightly cupped shape that gives them spring-like flexibility to grip tighter than split and tooth lock washers.

Belleville Spring Lock Washers for Socket Head Screws

These washers have smaller outside diameters than standard spring lock washers to fit neatly under socket head cap screws.

Spring Lock Washers for Slotted Bearing Nuts

Designed for use with bearing nuts, these lock washers have a conical shape that presses like a spring against bearings, bushings, gears, and pulleys to hold them in place on your threaded shaft or spindle.

Metric Spring Lock Washers

The arched shape of these washers presses up against a bolt and down against a nut to prevent loosening from wear, vibration, or temperature changes.

Wedge Lock Washers

Comparable to NORD-LOCK® or Sherex TEC Series washers, these two-piece washers provide more locking power than split, tooth, and spring lock washers. Wedges on the inside lock the two pieces together, and serrations on the exterior grip surfaces to resist loosening from high vibration and shifting.

Tab Lock Washers

Metric Tab Lock Washers

Bend the tab on these metric lock washers to prevent the fastener and washer from turning and loosening due to vibration.

Tab Lock Washers

Bend one tab against the side of the mounting surface and the other tab against the flats on a bolt or nut to prevent both the fastener and washer from turning and loosening in high-vibration applications, such as a motor mount.

Metal-Bonded Sealing Washers

High-Pressure-Rated Metal-Bonded Sealing Washers

Able to withstand pressure greater than 3,000 psi, these one-piece bonded washers create the tightest seals.

Metric High-Pressure-Rated
Metal-Bonded Sealing Washers

Able to withstand pressure greater than 2,000 psi, these one-piece bonded washers create the tightest seals.

Pressure-Rated Metal-Bonded Sealing Washers

These washers are rated to withstand pressure up to 100 psi.

Pressure-Rated Metal-Bonded Sealing
Washers for Nuts and Washers

Also known as thread-sealing washers, use these under nuts and other washers.

Metal-Bonded Sealing Washers

Create a stronger seal than metal or rubber alone. These one-piece washers are metal for strength with a bonded rubber seal that creates a tight grip.

Metal-Bonded Sealing Washers for Enclosures

Mount components to your enclosure without worrying about leaks.

Sanitary Metal-Bonded Sealing Washers

Eliminate cavities under screw heads where contamination may occur.

Leveling and Wave Washers

Triple-Wave Washers

With three points of surface contact, these washers provide more stability than single-wave washers.

Metric Single-Wave Washers

These curved, flexible washers act like springs to compensate for tolerance variations and uneven surfaces.

Single-Wave Washers

These curved, flexible washers act like springs to compensate for tolerance variations and uneven surfaces.

Leveling Washers

Also known as spherical washers, these consist of a male and female washer that, when nested, swivel slightly to compensate for tolerance variations and uneven surfaces.

Metric Leveling Washers

Also known as spherical washers, these consist of a metric male and female washer that, when nested, swivel slightly to compensate for tolerance variations and uneven surfaces.

Leveling Washers for I-Beams

Commonly called beveled washers, these are tapered to fit inside an I-beam's flange to provide a parallel bearing surface.

Metric Leveling Washers for I-Beams

Commonly called beveled washers, these metric washers are tapered to fit inside an I-beam's flange to provide a parallel bearing surface.

Round Shims

Ring Shims

Precisely align, level, and adjust spacing on fasteners and shafts with these shims.

Ring Shim Sets

Be prepared with ring shims in a variety of thicknesses. These shims fit around fasteners and shafts to precisely align, level, and adjust spacing.

Wide-Rim Ring Shims

Also known as machinery bushings, these shims have an oversized OD to create a larger bearing surface for reduced wear between moving parts.

Tight-Fit Ring Shims

For a snug fit around a shaft, the ID of these shims is held to a tighter tolerance than other round shims.

Peel-Away Layered Ring Shims

These shims are made of layers of metal bonded with adhesive. Remove layers with a utility knife until you get the thickness you need.

Shims for Shortening Screw Shoulders

Slide these shims under the screw head to shorten the shoulder length.

Shims for Lengthening Screw Shoulders

Spin these shims onto screw threads to extend the shoulder length.

Shims for Ball Bearings

Adjust spacing between bearings and other components on shafts. These shims are sized to fit the outer rim of a bearing.

Shims for Ball Bearing Housings

Also called tolerance rings, these rings are for use in stamped, molded, or worn housings to form a tight hold on the bearings.

Shims for Button Dies

Place these shims under sharpened dies to restore their original height and extend their life.

Shims for Keyed Shafts

Precisely shaped to fit snugly on keyed shafts, these shims align, level, and space components. Because of their tight fit, they also help components rotate in unison with the shaft.

Disc Shims

Use these round shims as they are, or punch out the middle to create the ID you need.

Slotted Shims

The slot lets you insert, remove, and adjust the shims without disassembling your machinery.

Slotted Shim Sets

Be prepared with slotted shims in a variety of thicknesses. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.

Color-Coded Slotted Shim Sets

Keep slotted shims in a variety of thicknesses on hand with these sets, which are color-coded by thickness for easy identification. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.

Horseshoe Shims

Align cabinets, doors, and windows with these shims. The horseshoe design fits around screws.

Shim Tape

Level dies, plates, presses, and other machine tools—this shim tape conforms to curves and uneven surfaces.

Made-to-Order Shims

Send us a drawing, and we'll cut your custom shim.

Made-to-Order Peel-Away Layered Shims

Send us a drawing, and we'll cut your custom shim. Shims are made of layers of metal bonded with adhesive; remove layers with a utility knife until you get the thickness you need.

Spacers and Standoffs

18-8 Stainless Steel Unthreaded Spacers

18-8 stainless steel spacers have good corrosion resistance.

316 Stainless Steel Unthreaded Spacers

These spacers have excellent corrosion resistance and are passivated for enhanced protection.

Sanitary Unthreaded Spacers

Create space to clean between components on food processing lines and other sanitary equipment.

Made-to-Order Unthreaded Spacers

Choose the OD, ID, length, and material and we will accommodate your unique spacer needs.

Unthreaded Spacers for Angles

The 45° end fits against an angled surface to create a flat surface for connection.

Press-Fit Unthreaded Spacers

Also known as captive spacers, the splines on these bite into a panel for a permanent hold.

Washer Assortments

SAE Washer Assortments

SAE washers generally have a smaller ID and OD than USS washers.

Oversized Washer Assortments

These washers have exaggerated diameters and/or thicknesses for covering oversized holes or for use as spacers and levelers.

Split Lock Washer Assortments

As a screw is tightened, these washers flatten to add tension to the joint and prevent loosening from small amounts of vibration.

Fastener Maintenance Assortments

Retaining Ring Assortments

External and Internal Retaining Ring Assortments

Assortments include pliers to install external and internal rings.

External and Internal Spiral Retaining Ring Assortments

Wind these retaining rings into a groove—no tools required for installation.

External Retaining Ring Assortments

Pull these rings open with retaining ring pliers, pass over the end of a shaft, and release to spring into a groove.

Side-Mount External Retaining Ring Assortments

Also known as E-Style and C-style rings, slide these into the groove from the side of the shaft. They provide a wider shoulder than other external retaining rings for a larger retaining surface.

Internal Retaining Ring Assortments

Pull ring ends together with retaining ring pliers and place into the bore of a shaft or housing.

External Retaining Rings

Open these rings, pass them over the end of a shaft, and release to spring into the groove.

Heavy Duty External Retaining Rings

Thicker than standard external retaining rings, these rings withstand greater force.

Mil. Spec. External Retaining Rings

These rings meet military specification MS 16624.

Self-Locking External Retaining Rings

No groove is required for these rings—their thick profile helps them grip the shaft.

Push-On External Retaining Rings

No groove required—press these rings onto the end of a shaft for a firm grip.

Push-On Retaining Caps

Use these caps to hold components in place and protect shaft ends.

Side-Mount External Retaining Rings

Also known as E-style rings.

Low-Clearance Side-Mount External Retaining Rings

Also known as C-style and crescent rings, these rings have a small shoulder to fit in tight spaces.

Heavy Duty Side-Mount External Retaining Rings

These rings are reinforced to withstand faster rotation than other side‐mount retaining rings. Also known as reinforced E‐style rings.

Wide-Grip Side-Mount External Retaining Rings

Also known as poodle rings, these thick rings have "ears" that form a large retaining surface to withstand stronger forces than other side-mount retaining rings.

Heavy Duty Spiral External Retaining Rings

Thicker than standard spiral rings, these rings withstand greater forces.

Spiral External Retaining Rings

These coiled rings can be wound into place on a shaft without tools.

Single-Turn Spiral External Retaining Rings

Slide these rings into place with one twist—no tools required—for applications with high thrust loads.

Crimp-On External Retaining Rings

Also known as X-washers, place these rings into the groove and squeeze tight with pliers to form a 360° closure.

Internal Retaining Rings

Squeeze these rings to place them in the groove inside a bore or housing.

Heavy Duty Spiral Internal Retaining Rings

Thicker than standard spiral rings, these rings withstand greater forces.

Single-Turn Spiral Internal Retaining Rings

Slide these rings into place by hand with a single twist for applications with high thrust loads.

Spiral Internal Retaining Rings

These coiled rings can be wound into place inside a bore or housing without tools.

Push-On Internal Retaining Rings

No groove required—these rings have teeth that firmly grip the bore.

Nuts

Rectangular Push Nuts

Also known as flat-style speed nuts, these have large sides, so they're easy to push over threads by hand.

Stainless Steel Snap-In Nuts

Stainless steel snap-in nuts have excellent corrosion resistance in most environments.

Captive Panel Screws

Socket Head Captive Panel Screws

Install these socket head screws through a hole and thread on a retainer to keep secure—no special tools are required.

Thumb-Screw-Head Captive Panel Screws

Install these thumb-screw-head screws through a hole and thread on a retainer to keep secure—no special tools are required.

Rounded Head Captive Panel Screws

Install these rounded head screws through a hole and thread on a retainer to keep secure—no special tools are required.

Flush-Mount Press-Fit Captive Panel Screws

These screws mount flush against the outer panel's surface for low-clearance applications.

Oil-Resistant Extreme-Pressure Stainless Steel O-Rings

Made of silver-plated 321 stainless steel, these O-rings can handle extreme pressure up to 11,000 psi. They resist grease, hydraulic oils, mineral oil, motor oil, and synthetic lubricants.

Disc Springs

Corrosion-Resistant Belleville Disc Springs

Made of stainless steel, these springs are more corrosion resistant than steel springs. Use them on shafts, bolts, and the ends of valves to maintain tension and separate components.

Belleville Disc Springs for Flange Bolts

Keep pipe flange connections sealed during demanding applications. When installed under flange bolt heads, these springs compensate for shock loads, vibration, and thermal expansion and contraction.

Mil. Spec. Belleville Disc Springs

These springs meet MIL-W-12133.

Corrosion-Resistant Wave Disc Springs

Made of stainless steel, these springs are more corrosion resistant than steel wave disc springs.

Corrosion-Resistant Stacked Wave Disc Springs

Made of 17-7 PH stainless steel with multiple rows of waves, these springs are more corrosion resistant than steel springs and handle greater loads than standard wave disc springs.

Corrosion-Resistant Curved Disc Springs

Made of stainless steel, these springs are more corrosion resistant than steel springs.

Notched Disc Springs

Notches make these springs more flexible than Belleville disc springs and allow liquid to flow around the spring, even while it's in use.

Building and Machinery Hardware

Fabric Grommets

Press these grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Rolled-Rim Reinforcing Fabric Grommets

A rolled rim provides added grip while the elongated neck and teeth on the washer, also known as a spur washer, add reinforcement and reduce rotation so you can use these grommets in thick materials such as canvas. Press the grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Furniture Grommets

Eliminate clutter on desktops, countertops, benchtops, and other work surfaces by organizing wire, cable, and cords.

Strut Channel Washers

Use with hex nuts to connect threaded rod.

Centering Strut Channel Washers

Keep hardware centered in the strut channel slot.

Sit-on-Top Strut Channel Washers

Add hardware to strut channel without having to hold the washer in place or reach inside the channel.

No-Spin Strut Channel Washers

Notches on these washers grip the channel to keep them in place.

Hinged Strut Channel Nuts

Quickly attach these nuts by twisting them closed at any point along a threaded rod.

Janitorial and Cleaning

Quick-Disconnect Wash Gun Extensions

Clean hard-to-access areas by extending the reach of your quick-disconnect wash gun.

Automatic Shoe and Boot Washing Stations

Clean your shoes and boots before entering sanitary environments, such as production areas in food-processing plants.

Automatic Hand Washing Stations

Metal Scouring Scrubbers

Metal scrubbers are flexible and corrosion resistant for your toughest cleaning jobs.

Blowguns, Air Nozzles, and Air Knives

Air Nozzles

These premium nozzles are engineered for the most efficient airflow consumption.

Adjustable-Flow Air Nozzles

Control consumption and noise by adjusting the airflow.

Adjustable-Length Air Nozzles

Extend these telescoping nozzles to increase your reach.

Wide-Airflow Air Nozzles

The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.

Adjustable Wide-Airflow Air Nozzles

Adjust airflow to control consumption and noise.

Food Industry Wide-Airflow Air Nozzles

These nozzles are made of FDA-listed materials.

Precise-Airflow Air Nozzle Sets

These needle-style nozzles force air to a precise pinpoint.

Precise-Airflow Air Nozzles

Focus air with pinpoint precision.

Reverse-Airflow Air Nozzles

Blow air backward to clean out the inside of pipes, tubes, and channels without pushing debris into your system.

Wide-Airflow Bend-and-Stay Air Nozzles

The flat nozzle tip distributes air over a wider area than focused-airflow nozzles.

Air Nozzle Swivels

Attach one of these swivels to an air nozzle to direct air 30° left, right, up, and down.

High-Efficiency Air Knives

Producing the same airflow as standard air knives, these are quieter and use 18% less compressed air.

Air Knives

Create a sheet of high-velocity air.

Sanitary Air Knives for Blowers

Dry and cool parts, wipe conveyor belts, control coating depth, and blow liquid, chips, and dust off of equipment in sanitary environments.

Parts Cleaning and Treating Baskets

Round Enclosed Parts Baskets

Extra-Rigid Stainless Steel
Rectangular Enclosed Parts Baskets

Made from sheet metal with stamped holes, these baskets are more rigid than wire mesh.

Stainless Steel Rectangular Enclosed Parts Baskets

Baskets are wire mesh.

Stainless Steel Round Parts Baskets

Made-to-Order Stainless Steel Round Parts Baskets

Create a basket to meet your exact size specifications.

Made-to-Order Stainless Steel
Rectangular Parts Baskets

Create a basket to meet your exact size specifications.

Stainless Steel Rectangular Parts Baskets

Fastener Kits for Enclosures

Mount components to your enclosure without worrying about leaks—these kits seal out water from washdowns, rain, and snow when used with enclosures rated NEMA 4X.

Tag Rings

Loop these rings onto tags.

Locking Tag Rings

Choose from twisting, threading, cinching, and other locking mechanisms.

Strainers

Medium-Pressure Stainless Steel Y-Strainers

Low-Pressure Stainless Steel Y-Strainers

High-Pressure Stainless Steel Y-Strainers

Stainless Steel Quick-Clamp T-Strainers

Add these inline T-strainers to your sanitary process line to trap solid particles during clean-in-place (CIP) cycles. They have quick-clamp sanitary tube connections, also known as tri-clamp connections, for use in dairy, food, and other process lines that require frequent cleaning and disassembly. As the high-pressure cleaning fluid flows through your line, the strainer's screen catches particles larger than 1/8" to prevent damage to pumps, valves, and other downstream components.

Temporary Inline Strainers

Remove debris from new pipelines before installing equipment. Sandwich strainers between two flanges with the cone pointing in the direction of flow.

Stainless Steel Basket Strainers

Made of 316 stainless steel, these basket strainers have better corrosion resistance than iron and bronze basket strainers.

Easy-Swap Stainless Steel Basket Strainers

Made of 316 stainless steel, these basket strainers have better corrosion resistance than iron and bronze basket strainers.

ASME-Code Metal Basket Strainers

These basket strainers are constructed for use with boilers and pressure vessels.

Self-Cleaning Metal Basket Strainers

Spend less time on maintenance—these strainers have an inverted basket that allows debris to fall into the drain as it collects.

Sanitary Magnetic Strainers

Draw metal shavings and other contaminants out of your sanitary liquid line with these strainers.

Webbing Anchor Plates

Sew webbing onto these plates for a permanent anchor point or run webbing through to use them as guides.

Washers

General Purpose Washers

Metric General Purpose Washers

Oversized Washers

Metric Oversized Washers

Mil. Spec. Washers

SAE Washers

ASME Washers

USS Washers

Washers for Blind Rivets

Washer Blanks

Countersunk Washers

Metric Countersunk Washers

Finishing Countersunk Washers

Metric Finishing Countersunk Washers

Clipped Washers

Oversized Clipped Washers

Double-Clipped Washers

Square Washers

Sleeve Washers for Soft Material

Easy-Install Slotted Washers

Angled-Edge Washers forToggle Clamp Holding Screws

Adhesive-Back Washers

Rectangular Washers

Washers for Square-Neck Bolts

Split Lock Washers

Split Lock Washers

Metric Split Lock Washers

Mil. Spec. Split Lock Washers

Metric Split Lock Washers for Socket Head Screws

Split Lock Washers for Socket Head Screws

Oversized Split Lock Washers

Tooth Lock Washers

External-Tooth Lock Washers

Metric External-Tooth Lock Washers

Mil. Spec. External-Tooth Lock Washers

Tight-Grip External-Tooth Lock Washers

Countersunk External-Tooth Lock Washers

Internal-Tooth Lock Washers

Metric Internal-Tooth Lock Washers

Mil. Spec. Internal-Tooth Lock Washers

Internal-/External-Tooth Lock Washers

Spring Lock Washers

Belleville Spring Lock Washers

Belleville Spring Lock Washers for Socket Head Screws

Spring Lock Washers for Slotted Bearing Nuts

Metric Spring Lock Washers

Wedge Lock Washers

Wedge Lock Washers

Tab Lock Washers

Metric Tab Lock Washers

Tab Lock Washers

Metal-Bonded Sealing Washers

High-Pressure-Rated Metal-Bonded Sealing Washers

Metric High-Pressure-RatedMetal-Bonded Sealing Washers

Pressure-Rated Metal-Bonded Sealing Washers

Pressure-Rated Metal-Bonded SealingWashers for Nuts and Washers

Metal-Bonded Sealing Washers

Metal-Bonded Sealing Washers for Enclosures

Sanitary Metal-Bonded Sealing Washers

Leveling and Wave Washers

Triple-Wave Washers

Metric Single-Wave Washers

Single-Wave Washers

Leveling Washers

Metric Leveling Washers

Leveling Washers for I-Beams

Metric Leveling Washers for I-Beams

Round Shims

Ring Shims

Ring Shim Sets

Wide-Rim Ring Shims

Tight-Fit Ring Shims

Peel-Away Layered Ring Shims

Shims for Shortening Screw Shoulders

Shims for Lengthening Screw Shoulders

Shims for Ball Bearings

Shims for Ball Bearing Housings

Shims for Button Dies

Shims for Keyed Shafts

Angled-Edge Washers for
Toggle Clamp Holding Screws

Metric High-Pressure-Rated
Metal-Bonded Sealing Washers

Pressure-Rated Metal-Bonded Sealing
Washers for Nuts and Washers