Stainless Steel Shackles

Filter by

Material

15-5 PH Stainless Steel

17-4 PH Stainless Steel

Pin Diameter

Shackle Type

Pin Type

Captive Locking Screw

Inside Length

Application

Inside Width

Thickness

Weight Capacity

10,000 lb. to 19,999 lb.

Pin Material

Performance

Attachment Type

Applied Load Direction

Safety Factor

For Use With

REACH

RoHS

Specifications Met

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Exempt

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

For Web Width

Clevis Inside Width

Eye ID

Usable Length

147 Products

Anchor Shackles for Lifting

Your go-to choice for connecting hooks, slings, and other rigging and lifting equipment. The rounded body on these shackles supports vertical or side loads without fatiguing or warping the shape. They meet ASME specifications for rigging and lifting, so they can hoist everything from steel beams to bulldozers. Look for the manufacturer's stamp to confirm the size and weight capacity. Also known as bow shackles.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.

Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.

Safety Cotter Pin—Both a threaded nut and cotter pin hold these shackles in place. Also known as bolt-type shackles, the pin won’t slide out with movement. This means you can use these shackles with vibrating equipment and for long-term rigging setups.

Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.

	Inside Lg.	Inside Wd.	Wt. Cap., lb.	Specs. Met	Mil. Spec.		Each
Screw Pin







	Highly Corrosion-Resistant 316 Stainless Steel

	3/16"	13/32"	1/4"	27/32"	19/32"	650	ASME B30.26	Fed. Spec. RR-C-271	3583T21	000000


	1/4"	15/32"	5/16"	1 1/8"	3/4"	1,000	ASME B30.26	Fed. Spec. RR-C-271	3583T11	00000
	5/16"	17/32"	3/8"	1 7/32"	13/16"	1,300	ASME B30.26	Fed. Spec. RR-C-271	3583T12	00000
	3/8"	21/32"	7/16"	1 7/16"	31/32"	1,500	ASME B30.26	Fed. Spec. RR-C-271	3583T13	00000
	7/16"	23/32"	1/2"	1 25/32"	1 1/16"	2,000	ASME B30.26	Fed. Spec. RR-C-271	3583T14	00000
	1/2"	13/16"	5/8"	1 27/32"	1 7/32"	3,000	ASME B30.26	Fed. Spec. RR-C-271	3583T15	00000
	5/8"	1 1/32"	3/4"	2 7/16"	1 1/2"	4,000	ASME B30.26	Fed. Spec. RR-C-271	3583T16	00000
	3/4"	1 1/4"	7/8"	2 27/32"	1 29/32"	6,000	ASME B30.26	Fed. Spec. RR-C-271	3583T17	00000
	7/8"	1 15/32"	1"	3 5/16"	2 7/32"	8,000	ASME B30.26	Fed. Spec. RR-C-271	3583T18	00000
	1"	1 11/16"	1 1/8"	3 13/16"	2 5/16"	10,000	ASME B30.26	Fed. Spec. RR-C-271	3583T19	000000
	1 1/4"	2 1/32"	1 3/8"	4 11/16"	3 5/16"	14,000	ASME B30.26	Fed. Spec. RR-C-271	3583T22	000000


	Safety Cotter Pin







					Highly Corrosion-Resistant 316 Stainless Steel

					1/4"	1/2"	5/16"	1 1/8"	3/4"	1,000	ASME B30.26	Fed. Spec. RR-C-271	3860T21	00000


					5/16"	17/32"	3/8"	1 7/32"	13/16"	1,300	ASME B30.26	Fed. Spec. RR-C-271	3860T22	00000
					3/8"	11/16"	7/16"	1 7/16"	31/32"	1,500	ASME B30.26	Fed. Spec. RR-C-271	3860T23	00000
					7/16"	3/4"	1/2"	1 25/32"	1 1/16"	2,000	ASME B30.26	Fed. Spec. RR-C-271	3860T24	00000
					1/2"	27/32"	5/8"	1 27/32"	1 7/32"	3,000	ASME B30.26	Fed. Spec. RR-C-271	3860T25	00000
					5/8"	1 1/32"	3/4"	2 7/16"	1 1/2"	4,000	ASME B30.26	Fed. Spec. RR-C-271	3860T26	000000
					3/4"	1 1/4"	7/8"	2 27/32"	1 3/4"	6,000	ASME B30.26	Fed. Spec. RR-C-271	3860T27	000000
					7/8"	1 1/2"	1"	3 5/16"	2"	8,000	ASME B30.26	Fed. Spec. RR-C-271	3860T28	000000
					1"	1 23/32"	1 1/8"	3 13/16"	2 5/16"	10,000	ASME B30.26	Fed. Spec. RR-C-271	3860T29	000000
					1 1/4"	2 1/32"	1 3/8"	4 11/16"	3 5/16"	14,000	ASME B30.26	Fed. Spec. RR-C-271	3860T31	000000

Anchor Shackles

Screw Pin

Flush Screw Pin

Captive-Locking-Screw

Safety Cotter Pin

The most common choice for connecting slings, hooks, and more. The bow on these shackles is wider than the pin to support loads from multiple directions and accommodate multiple connectors. They’re often used to tie down or secure loads for transport or storage. Also known as bow shackles.

Warning: Not for overhead lifting.

Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.

Flush Screw Pin—The ends of the pin sit flush with the shackle, so they won’t snag or catch on anything that might loosen the shackle.

Captive-Locking-Screw Pin—The pin on these shackles won’t fall out or get lost. Even when unscrewed, an inner lip on the shackle ear keeps the pin from sliding all the way out. Indentations in the shackle body hold the head of the pin in place once fastened to secure it from vibration and movement.

Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.

	Thk.	Inside Lg.	Inside Wd.	Wt. Cap., lb.		Each
Screw Pin







		Highly Corrosion-Resistant 316 Stainless Steel

		5/32"	11/32"	5/32"	3/4"	9/16"	200	35355T94	00000


		3/16"	7/16"	7/32"	31/32"	23/32"	500	35355T13	0000
		1/4"	1/2"	1/4"	1 3/32"	27/32"	700	35355T14	0000
		5/16"	11/16"	5/16"	1 15/32"	1 1/8"	1,000	35355T25	0000
		3/8"	13/16"	13/32"	1 25/32"	1 3/8"	1,200	35355T26	00000
		15/32"	15/16"	15/32"	2 5/32"	1 21/32"	1,500	35355T95	00000
		1/2"	1 1/16"	17/32"	2 11/32"	1 7/8"	2,500	35355T27	00000
		5/8"	1 1/4"	5/8"	3"	2 3/16"	3,000	35355T96	00000
		3/4"	1 1/2"	3/4"	3 11/32"	2 11/16"	4,000	35355T97	00000
		7/8"	1 23/32"	7/8"	3 27/32"	2 31/32"	5,000	35355T98	00000
		1"	1 31/32"	31/32"	4 7/16"	3 3/8"	6,000	35355T28	000000


		1 1/4"	2 1/2"	1 1/4"	5 7/16"	4 15/32"	9,000	35355T99	000000


		Flush Screw Pin







						Highly Corrosion-Resistant 316 Stainless Steel

						1/4"	15/32"	1/4"	1 1/32"	25/32"	750	3981N11	0000


						5/16"	21/32"	5/16"	1 7/16"	1 1/32"	1,000	3981N12	0000
						3/8"	25/32"	13/32"	1 3/4"	1 1/4"	1,200	3981N13	00000
						15/32"	15/16"	1/2"	2 5/32"	1 19/32"	1,500	3981N14	00000
						1/2"	1 1/32"	17/32"	2 5/16"	1 27/32"	2,500	3981N15	00000
						5/8"	1 1/4"	21/32"	3"	2 3/32"	3,000	3981N16	00000
						3/4"	1 1/2"	3/4"	3 5/16"	2 17/32"	4,000	3981N17	00000
						7/8"	1 23/32"	7/8"	3 27/32"	2 7/8"	5,000	3981N18	00000
						1"	1 15/16"	31/32"	4 13/32"	3 1/4"	6,000	3981N19	000000


						Captive-Locking-Screw Pin







										Highly Corrosion-Resistant 316 Stainless Steel

										5/32"	5/16"	3/16"	23/32"	1/2"	400	3797T61	00000


										3/16"	13/32"	1/4"	29/32"	5/8"	600	3797T62	00000
1/4"										15/32"	9/32"	1 3/32"	3/4"	900	3797T53	00000
5/16"	5/8"									11/32"	1 15/32"	1 1/32"	1,600	3797T54	00000
3/8"	25/32"									13/32"	1 3/4"	1 11/32"	1,200	3797T101	00000
13/32"	25/32"									7/16"	1 13/16"	1 3/8"	2,200	3797T55	00000
15/32"	15/16"									15/32"	2 5/32"	1 21/32"	1,500	3797T102	00000


Safety Cotter Pin







										Highly Corrosion-Resistant 316 Stainless Steel

										1/4"	1/2"	1/4"	29/32"	13/16"	750	3992N11	0000


										5/16"	21/32"	5/16"	1 1/4"	1 3/32"	1,200	3992N12	00000
										3/8"	13/16"	13/32"	1 9/16"	1 1/4"	2,000	3992N13	00000
										15/32"	31/32"	1/2"	1 15/16"	1 1/2"	3,000	3992N14	00000
										5/8"	1 9/32"	5/8"	2 15/32"	2 3/16"	4,000	3992N15	00000
										3/4"	1 19/32"	25/32"	3 3/32"	2 17/32"	5,500	3992N16	00000

D-Type Shackles

Screw Pin

Flush Screw Pin

Locking-Screw Pin

Captive-Locking-Screw

Safety Cotter Pin

Pair these shackles with chain to pull and tow loads. The narrow bow prevents chain links from sliding or moving, but they're rated for inline tension only—they can’t handle pulling or tension to the side. Also known as chain shackles.

Warning: Not for overhead lifting.

Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.

Flush Screw Pin—The ends of the pin sit flush with the shackle, so they won’t snag or catch on anything that might loosen the shackle.

Locking-Screw Pin—Indentations in the shackle body hold the head of the pin in place once fastened, so the pin won’t loosen from vibration or movement as easily as other screw pins.

Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.

	Inside Lg.	Inside Wd.	Wt. Cap., lb.		Each
Screw Pin







	Highly Corrosion-Resistant 316 Stainless Steel

	3/16"	13/32"	7/32"	21/32"	13/32"	500	3989N11	00000


	1/4"	1/2"	1/4"	13/16"	1/2"	750	3989N12	0000
	5/16"	21/32"	5/16"	1 3/32"	21/32"	1,000	3989N13	0000
	3/8"	13/16"	13/32"	1 11/32"	13/16"	2,000	3989N14	00000
	15/32"	31/32"	1/2"	1 5/8"	31/32"	3,000	3989N15	00000
	5/8"	1 9/32"	5/8"	2 3/16"	1 9/32"	4,000	3989N16	00000
	3/4"	1 19/32"	25/32"	2 3/4"	1 19/32"	5,500	3989N17	00000


	Flush Screw Pin







					Highly Corrosion-Resistant 316 Stainless Steel

					1/4"	15/32"	1/4"	27/32"	15/32"	750	3982N11	0000


					5/16"	21/32"	5/16"	1 3/32"	21/32"	1,000	3982N12	0000
					3/8"	25/32"	13/32"	1 3/8"	25/32"	1,200	3982N13	00000
					15/32"	29/32"	1/2"	1 5/8"	29/32"	1,500	3982N14	00000
					1/2"	1 1/16"	9/16"	1 13/16"	1 1/16"	2,500	3982N15	00000
					5/8"	1 1/4"	21/32"	2 3/16"	1 1/4"	3,000	3982N16	00000
					3/4"	1 1/2"	3/4"	2 19/32"	1 1/2"	4,000	3982N17	00000
					7/8"	1 23/32"	7/8"	3"	1 23/32"	5,000	3982N18	00000
					1"	1 15/16"	1"	3 13/32"	1 15/16"	6,000	3982N19	00000


					Locking-Screw Pin







									Highly Corrosion-Resistant 316 Stainless Steel

									5/32"	11/32"	5/32"	17/32"	11/32"	300	3824T71	00000


									3/16"	13/32"	3/16"	21/32"	13/32"	400	3824T72	00000
									1/4"	1/2"	1/4"	13/16"	1/2"	700	3824T73	00000
									5/16"	21/32"	5/16"	1 1/32"	21/32"	1,100	3824T74	00000
									13/32"	13/16"	13/32"	1 5/16"	13/16"	1,800	3824T75	00000
									15/32"	31/32"	15/32"	1 9/16"	31/32"	2,600	3824T76	00000


									Captive-Locking-Screw Pin







									Highly Corrosion-Resistant 316 Stainless Steel

									5/32"	11/32"	3/16"	17/32"	11/32"	400	3824T81	00000


									3/16"	13/32"	7/32"	21/32"	13/32"	600	3824T82	00000
									1/4"	1/2"	1/4"	13/16"	1/2"	900	3824T83	00000
									5/16"	21/32"	11/32"	1 1/32"	21/32"	1,500	3824T84	00000
									13/32"	13/16"	13/32"	1 5/16"	13/16"	2,200	3824T85	00000
									15/32"	31/32"	1/2"	1 9/16"	31/32"	3,000	3824T86	000000


									Safety Cotter Pin







				Highly Corrosion-Resistant 316 Stainless Steel

				1/4"						1/2"	1/4"	13/16"	1/2"	750	4031N11	0000


				5/16"						21/32"	5/16"	1 3/32"	21/32"	1,000	4031N12	0000
				3/8"						13/16"	13/32"	1 11/32"	13/16"	2,000	4031N13	00000
				15/32"						31/32"	1/2"	1 5/8"	31/32"	3,000	4031N14	00000
				5/8"						1 9/32"	5/8"	2 3/16"	1 9/32"	4,000	4031N15	00000
				3/4"						1 1/2"	25/32"	2 3/4"	1 1/2"	5,500	4031N16	00000

Long-Reach D-Type Shackles

Screw Pin

Locking-Screw

Captive-Locking-Screw

Gain extra reach with these shackles. With an elongated body, they can connect loads to an anchor point too far for a standard shackle. They're best paired with chain, since their narrow bow prevents chain links from sliding or moving. These shackles are rated for inline tension only—they can’t handle pulling or tension to the side.

Warning: Not for overhead lifting.

Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.

Locking-Screw Pin—Indentations in the shackle body hold the head of the pin in place once fastened, so the pin won’t loosen from vibration or movement as easily as other screw pins.

Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.

	Inside Lg.	Inside Wd.	Wt. Cap., lb.		Each
Screw Pin







	Highly Corrosion-Resistant 316 Stainless Steel

	5/32"	11/32"	5/32"	1 3/16"	11/32"	200	35685T56	00000


	3/16"	7/16"	3/16"	1 1/2"	7/16"	500	35685T52	0000
	1/4"	1/2"	1/4"	1 3/4"	1/2"	700	35685T43	00000
	5/16"	11/16"	5/16"	2 5/16"	11/16"	1,000	35685T54	00000
	3/8"	25/32"	3/8"	2 7/8"	25/32"	1,200	35685T55	00000
	1/2"	15/16"	15/32"	3 1/2"	15/16"	1,500	35685T57	00000


	Locking-Screw Pin







					Highly Corrosion-Resistant 316 Stainless Steel

					5/32"	11/32"	3/16"	7/8"	5/16"	300	3841T71	00000


					3/16"	13/32"	7/32"	1 5/32"	3/8"	400	3841T72	00000
					1/4"	1/2"	1/4"	1 5/16"	15/32"	700	3841T73	00000
					5/16"	21/32"	11/32"	1 3/4"	5/8"	1,100	3841T74	00000


					Captive-Locking-Screw Pin







									Highly Corrosion-Resistant 316 Stainless Steel

									5/32"	11/32"	3/16"	1 1/4"	5/16"	400	3841T81	00000


									3/16"	13/32"	7/32"	1 9/16"	3/8"	600	3841T82	00000
									1/4"	1/2"	1/4"	1 13/16"	15/32"	900	3841T83	00000
									5/16"	21/32"	11/32"	2 15/32"	5/8"	1,500	3841T84	00000

D-Type Shackles for Lifting

Screw Pin

Safety Cotter Pin

The best choice for lifting with chain. The bow and pin are equally wide to keep chain links from sliding or moving and support heavier vertical loads than anchor shackles. However, they're rated for vertical lifting only, as side loading might deform the bow. All meet ASME specifications for use with rigging and lifting equipment. Look for the manufacturer's stamp to confirm the size and weight capacity. Also known as chain shackles.

Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.

Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.

Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.

	Inside Lg.	Inside Wd.	Wt. Cap., lb.	Specs. Met	Mil. Spec.		Each
Screw Pin







	Highly Corrosion-Resistant 316 Stainless Steel

	1/4"	15/32"	5/16"	7/8"	15/32"	1,000	ASME B30.26	Fed. Spec. RR-C-271	35895T111	00000


	5/16"	17/32"	13/32"	1 1/32"	17/32"	1,300	ASME B30.26	Fed. Spec. RR-C-271	35895T112	00000
	3/8"	21/32"	15/32"	1 1/4"	21/32"	1,500	ASME B30.26	Fed. Spec. RR-C-271	35895T113	00000
	7/16"	3/4"	1/2"	1 7/16"	3/4"	2,000	ASME B30.26	Fed. Spec. RR-C-271	35895T119	00000
	1/2"	13/16"	21/32"	1 19/32"	13/16"	3,000	ASME B30.26	Fed. Spec. RR-C-271	35895T114	00000
	5/8"	1 1/16"	3/4"	1 31/32"	1 1/16"	4,000	ASME B30.26	Fed. Spec. RR-C-271	35895T115	00000
	3/4"	1 7/32"	29/32"	2 13/32"	1 7/32"	6,000	ASME B30.26	Fed. Spec. RR-C-271	35895T116	000000
	7/8"	1 15/32"	1"	2 29/32"	1 15/32"	8,000	ASME B30.26	Fed. Spec. RR-C-271	35895T117	000000
	1"	1 11/16"	1 5/32"	3 7/32"	1 11/16"	10,000	ASME B30.26	Fed. Spec. RR-C-271	35895T118	000000


	Safety Cotter Pin







					Highly Corrosion-Resistant 316 Stainless Steel

					3/8"	21/32"	15/32"	1 1/4"	21/32"	1,500	ASME B30.26	Fed. Spec. RR-C-271	35895T123	00000


					1/2"	13/16"	21/32"	1 19/32"	13/16"	3,000	ASME B30.26	Fed. Spec. RR-C-271	35895T124	00000
					5/8"	1 1/16"	3/4"	1 31/32"	1 1/16"	4,000	ASME B30.26	Fed. Spec. RR-C-271	35895T125	000000
					3/4"	1 7/32"	29/32"	2 13/32"	1 7/32"	6,000	ASME B30.26	Fed. Spec. RR-C-271	35895T126	000000
					7/8"	1 15/32"	1"	2 29/32"	1 15/32"	8,000	ASME B30.26	Fed. Spec. RR-C-271	35895T127	000000
					1"	1 11/16"	1 5/32"	3 7/32"	1 11/16"	10,000	ASME B30.26	Fed. Spec. RR-C-271	35895T128	000000

90° Twist Shackles

Screw Pin

Flush Screw

Captive-Locking-Screw

Connect loads perpendicular to your anchor point without any twisting or knotting. The bow on these shackles is twisted 90° from the orientation of the pin, so they keep chain, ropes, and slings connected to the load and lifting point properly aligned.

Warning: Not for overhead lifting.

Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.

Flush Screw Pin—The ends of the pin sit flush with the shackle, so they won’t snag or catch on anything that might loosen the shackle.

Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.

	Inside Lg.	Inside Wd.	Wt. Cap., lb.		Each
Screw Pin







	Highly Corrosion-Resistant 316 Stainless Steel

	5/32"	5/16"	5/32"	5/8"	5/16"	200	33845T32	00000


	3/16"	3/8"	3/16"	13/16"	3/8"	500	33845T33	0000
	1/4"	7/16"	1/4"	1"	7/16"	700	33845T34	0000
	5/16"	9/16"	5/16"	1 5/16"	9/16"	1,000	33845T35	00000
	3/8"	23/32"	3/8"	1 13/16"	23/32"	1,200	33845T36	00000
	1/2"	31/32"	1/2"	2 13/16"	31/32"	1,500	33845T37	00000


	Flush Screw Pin







					Highly Corrosion-Resistant 316 Stainless Steel

					1/4"	13/32"	1/4"	1"	15/32"	750	3984N11	0000


					5/16"	5/8"	5/16"	1 9/32"	21/32"	1,000	3984N12	00000
					3/8"	11/16"	13/32"	1 25/32"	3/4"	1,200	3984N13	00000
					1/2"	15/16"	1/2"	2 3/16"	27/32"	1,500	3984N14	00000


					Captive-Locking-Screw Pin







									Highly Corrosion-Resistant 316 Stainless Steel

									1/4"	13/32"	1/4"	1"	15/32"	750	3985N11	0000


									5/16"	5/8"	5/16"	1 9/32"	21/32"	1,000	3985N12	00000
									3/8"	25/32"	11/32"	1 25/32"	3/4"	1,200	3985N13	00000

Flat Shackles

Keep loads distributed equally when using a web sling. The wide, flat bow on these shackles prevents slings from folding or bunching.

Warning: Not for overhead lifting.

Screw Pin—The most common shackle pin type. Although the pin easily connects and disconnects, it can come unscrewed or wear down over time, so it's best for temporary use.

Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.

	Pin Dia.	Inside Lg.	Inside Wd.	Wt. Cap., lb.		Each
Screw Pin







	Highly Corrosion-Resistant 316 Stainless Steel

	1"	5/32"	5/16"	7/32"	1 1/8"	1"	200	4038N11	000000

Quick-Release Shackles

Pin-Release

Shackles

with Clevis

End

Pin-Release

Shackles

with Eye End

Push the spring-loaded pin or collar to fasten these shackles, then pull it to release them. Traditionally used to secure and adjust lines on boats, they open faster than shackles with a screw or cotter pin.

Warning: Not for overhead lifting.

Pin-Release Shackles—Attach a rope, chain, or other pull to the pin to open the shackle from a distance. The end connection swivels for easy connecting and adjusting.

High-Strength 17-4 PH Stainless Steel—Made from one of the strongest types of stainless steel, these shackles won’t deform from vibration or stress. They also stand up to wet and outdoor environments.

Highly Corrosion-Resistant 316 Stainless Steel—Our most corrosion-resistant shackles stand up to moisture, salt water, and chemicals.

	End Attachment Type	Clevis Inside Wd.	Eye ID		Each
Pin-Release Shackles







	High-Strength 17-4 PH Stainless Steel

	5/8"	2 3/8"	1,200	Eye	—	7/16"	3899T43	000000


	13/16"	3 1/4"	2,100	Clevis	7/16"	—	3899T41	000000
	1"	4 1/8"	4,400	Eye	—	13/16"	3899T46	000000
	1"	4 1/4"	3,800	Clevis	11/16"	—	3899T52	000000




			Highly Corrosion-Resistant 316 Stainless Steel

			3/4"	2 7/8"	1,500	Clevis	1/2"	—	3899T55	00000


			3/4"	2 7/8"	1,500	Eye	—	5/8"	3899T53	00000
			1 1/16"	4 1/8"	2,000	Eye	—	7/8"	3899T54	00000
			1 1/16"	4 3/16"	2,000	Clevis	3/4"	—	3899T56	00000

Release-Under-Load Shackles

Pull the lever on these shackles to release loads, even under tension. By attaching a rope or chain to the lever, you can open it from afar. Precision made in the U.S., these shackles operate smoothly even in harsh sea conditions or high temperatures. They're ideal for safely releasing everything from lifeboats to fuel tanks into the water or onto the ground.

Warning: Not for overhead lifting.

15-5 PH Stainless Steel—Made from one of the toughest types of stainless steel, these shackles undergo heat treatment for extra strength and withstand impact and wear. They also resist corrosion from chemicals and salt water.

	End Attachment Type	Eye ID		Each
Lever-Release Shackles







	15-5 PH Stainless Steel

	5/16"	2"	1,300	Eye	3/8"	3398T25	0000000


	1/2"	3 1/8"	3,300	Eye	9/16"	3398T26	000000
	3/4"	4 9/16"	7,000	Eye	13/16"	3398T27	00000000

Tool Tether Attachments

Tether almost any tool—these attachments add a ring for a lanyard connection. When used together with a lanyard and an anchor, they prevent tools from accidentally falling and hurting someone or damaging equipment below.

Clip-On Attachment

Image of Attribute. Front orientation. Contains Annotated.

Clip-on attachments are for long-necked tools with wide ends, such as wrenches, pry bars, and hammers. The end of your tool needs to be wider than where the attachment point rests, so it won’t slip off. Made of stainless steel, they resist corrosion and are more durable than other attachments. They may slide up and down the tool as you use them. Add threadlocker to the pin to prevent loosening over time.

ANSI/ISEA 121—They meet ANSI/ISEA 121 for design and performance to ensure safety when working at height.

	Ring Inside Wd.	Ring Inside Lg.	For No. of Tools	Material	Construction	Specs. Met	Pkg. Qty.		Pkg.
Rigid Ring



	15	0.4"	0.75"	1	Stainless Steel	Solid	ANSI/ISEA 121	2	9860N11	00000


	15	0.5"	1"	1	Stainless Steel	Solid	ANSI/ISEA 121	2	9860N12	00000
	15	0.65"	1.25"	1	Stainless Steel	Solid	ANSI/ISEA 121	2	9860N13	00000
	15	0.8"	1.5"	1	Stainless Steel	Solid	ANSI/ISEA 121	2	9860N14	00000