We will reply to your message within an hour.
More
18-8 stainless steel screws have good chemical resistance.
More corrosion resistant than 18-8 stainless steel screws, these have excellent resistance to chemicals and salt water.
Stronger and more wear resistant than 18-8 and 316 stainless steel, these screws are mildly chemical resistant.
Made from 18-8 stainless steel, these screws are chemical resistant.
A thick, decorative head provides a finished appearance.
A tamper-resistant Torx driver is required for installation and removal. Also known as pin-in-Torx, these screws allow you to apply extra force with less slippage or damage to the recess.
Install and remove these screws with a tamper-resistant spanner driver.
Also known as pin-in-hex, install and remove these screws with a tamper-resistant hex driver.
The S-shaped drive can be installed with a standard slotted driver, but requires a special tool for removal.
These screws require a Tri-Wing® driver for installation and removal.
These square-drive screws are beveled under the head for use in countersunk holes.
Stronger and more wear resistant than 316 and 18-8 stainless steel, these screws are mildly chemical resistant.
A rubber O-ring under the head creates a seal that withstands liquid and gas pressure.
Made from 410 stainless steel, these screws are strong, wear resistant, and mildly chemical resistant.
410 stainless steel is strong, wear resistant, and mildly chemical resistant.
These 18-8 stainless steel screws have a hardened steel drill point to penetrate steel and are coated to increase corrosion resistance.
These screws have the strength of 410 stainless steel with added corrosion resistance.
Stronger and more wear resistant than 18-8 stainless steel, these screws are mildly chemical resistant.
Drill a pilot hole, cut threads, and fasten in one motion with these metric-threaded screws. Made of steel, they’re strong and wear resistant.
By drilling their own holes and fastening in a single operation, these square-drive screws save time and effort. Made of 410 stainless steel, they're both stronger and more wear resistant than 18-8 stainless steel screws.
Made from stainless steel, these screws are more corrosion resistant than steel, and almost as strong.
A decorative rounded top provides a finished appearance.
Made from 18-8 stainless steel, these screws have good chemical resistance.
Made from stainless steel to resist galvanic corrosion, use these screws to fasten aluminum to aluminum and steel framing. They save you time and effort by drilling their own holes and fastening in a single operation.
For a finished appearance that reduces the chance of snags on other material, these screws fit snugly in countersunk holes and have a domed head.
A wide cutting slot provides excellent chip clearing and low driving torque in soft metal.
Fasten sheet metal up to 0.200" thick.
Drilling screws save you time and effort by drilling their own holes and fastening metal up to 0.500" thick in a single operation.