A metal shell adds strength.

Also known as Trantorque bushings, these tighten with a twist of the collar nut—no screws needed.

Often used with V-groove wheels or track roller carriages, these off-center bushings create precise mounting clearance.

Instead of replacing your shaft or keeping components, such as couplings, with various bore diameters on hand, these reducers adapt the bore of a component to a smaller size.

Made of FDA-listed materials for use in food applications, these bearings also have excellent chemical and corrosion resistance.

The corrugated construction gives this sleeving impact and abrasion resistance similar to conduit, but with more flexibility.

These spacers have excellent corrosion resistance and are passivated for enhanced protection.

Create space to clean between components on food processing lines and other sanitary equipment.

Position components in assemblies, as well as separate or connect parts with these standoffs.

A nylon patch bonded to the threads adds friction, preventing these standoffs from loosening from vibration.

Choose these standoffs for their adherence to NAS 1831 specifications.

Mount components onto food processing lines, walls, and sanitary equipment while leaving space to clean in between.

Also known as captive standoffs, a recess under the hex clinches the panel for a strong hold that won't push, pull, or twist out. When mounted, the hex sits flush with the surface and the closed end creates a neat, finished appearance.

With the end clinched in place, the prongs allow you to quickly snap a panel on and off these supports.

These metric coupling nuts have good chemical resistance.

More corrosion resistant than 18-8 stainless steel coupling nuts, these nuts have excellent resistance to chemicals and salt water.

Stainless steel coupling nuts have excellent corrosion resistance in most environments.

The most corrosion resistant low-profile rivet nuts we offer, these stand up to chemicals.

These include a barrel and a screw with an extra-wide (truss) head. Made from 316 stainless steel, they have excellent chemical resistance and can be used in saltwater environments.

These include a barrel and a screw.

Add length to a binding barrel.

Angled under the head for a flush finish in countersunk holes.

More corrosion resistant than 18-8 stainless steel binding barrels and screws, these have excellent resistance to chemicals and salt water.

Install these binding barrels and screws with a standard slotted screwdriver. They require a special tool to remove.

Made of Nitronic 60 stainless steel, these inserts prevent the screw from binding or sticking without any coating or lubricant that could contaminate particle-free environments.

Eliminating the need for primer, these inserts are coated to resist corrosion when installed in different materials.

Made of Nitronic 60 stainless steel, these inserts prevent the screw from binding or sticking without any coating or lubricant that could contaminate particle-free environments.

Without a prong to break off and retrieve, these inserts are often used where debris could cause damage.

A distorted thread grips the screw to resist loosening.

Assortments include various sizes of helical inserts and a tap, a drill bit, and an installation tool for each thread size.

Kits include helical inserts, a tap, and an installation tool.

These inserts are made to stringent military specifications.

These inserts come with an installation tool. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts.

These inserts are the most corrosion-resistant thread-locking inserts we offer.

These 18-8 stainless steel inserts have better corrosion resistance than brass inserts and may be mildly magnetic.

The tapered shape makes it easier to guide these inserts into a hole during installation. Use a drill bit to create a straight hole, then taper the top half.

The most corrosion resistant tee nut inserts we offer, these inserts stand up to chemicals and salt water.

More corrosion resistant than 18-8 stainless steel anchors, these 316 stainless steel anchors have excellent resistance to chemicals and salt water.

These 18-8 stainless steel anchors have good chemical resistance.

For narrow holes and small cavities where toggle anchors won't fit.

Keep a variety of standoffs in different lengths and thread sizes on hand.

Use these sleeves with compression nuts and fittings to create a strong seal on stainless steel tubing.

Repair leaks in copper tubing.

Repair pinholes, punctures, and cracks in low-pressure systems with these clamps. Insert tubing into the clamp and tighten the bolts to create a secure seal.

Use in medium-pressure applications up to 600 psi.

Use ferrules to create a permanent connection between your air- and water-hose and barbed hose fittings.

Compress sleeves with more force than hydraulic hand tools.

Create a sanitary seal on through-wall piping, tubing, and cables in food-, cosmetic-, and pharmaceutical-processing areas.

Guard insulation from heavy impact and chemical exposure. This metal jacketing is corrosion resistant and often used outdoors.

Join duct and fittings with quick-release clamps for faster disassembly and cleanout than other duct systems.