Metal Bar Grating Stair Treads
Choose these stair treads for greater durability than metal plank grating stair treads. They have an open surface that prevents debris from accumulating. Nosing is textured for traction.
Stainless steel treads have better corrosion resistance than steel or aluminum.
For technical drawings and 3-D models, click on a part number.
Drainage Opening | Mounting Hole | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wd. | Dp. | Ht. | Thick. | Bearing Bar Ht. | Wd. | Lg. | Load Capacity, lbs. | No. of | Dia. | Lg. | Wd. | Ctr.-to-Ctr. (A) | Ctr.-to-Tread Top (B) | Ctr.-to-Tread Nosing (C) | Mounting Hardware Included | For Use Outdoors | Each | |
Smooth | ||||||||||||||||||
304 Stainless Steel | ||||||||||||||||||
| 36" | 9 3/4" | 2 1/2" | 3/16" | 1 1/4" | 1" | 3 3/4" | 300 | 4 | 7/16" | 1 7/16" | 7/16" | 7" | 1 3/4" | 1 1/8" | No | Yes | 000000 | 0000000 |
| 36" | 10 15/16" | 2 1/2" | 3/16" | 1 1/4" | 1" | 3 3/4" | 300 | 4 | 7/16" | 1 7/16" | 7/16" | 7" | 1 3/4" | 1 1/8" | No | Yes | 000000 | 000000 |
| 36" | 12 1/8" | 2 1/2" | 3/16" | 1" | 1" | 3 3/4" | 300 | 4 | 7/16" | 1 7/16" | 7/16" | 7" | 1 3/4" | 1 1/8" | No | Yes | 000000 | 000000 |
| 36" | 12 1/8" | 2 1/2" | 3/16" | 1 1/4" | 1" | 3 3/4" | 300 | 4 | 7/16" | 1 7/16" | 7/16" | 7" | 1 3/4" | 1 1/8" | No | Yes | 000000 | 000000 |
Heavy Duty Metal Antislip Tape
Metal abrasives embedded in a metal backing allow this tape to last far longer than other antislip tape. It is often used to cover larger areas than other antislip tape, such as walkways and ramps. Tape has an adhesive backing and can be walked on immediately after installation.
Ladder-Style Steps
Good for use as ladder rungs, cut these steps to size with a metal-cutting saw and weld them in place. For a clean weld, match the step material to the surface you are welding to. These steps must be welded at each end with welds capable of supporting the rated capacity. For those 5 ft. and longer, the maximum cut length is 24". Shorter lengths support higher capacities.
Serrated steps give you maximum slip resistance and allow liquids and debris to pass through. Perforated steps are less slip-resistant than serrated steps but offer a more comfortable hand grip.
Note: Check local, state, and federal codes, including OSHA, for safe set up and operating practices.
Overall | |||||
|---|---|---|---|---|---|
| Wd. (A) | Dp. (B) | Ht. (C) | Capacity | Each | |
304 Stainless Steel  | |||||
With Serrated Tread | |||||
| 17" | 1 1/8" | 1 1/4" | 540 lbs. | 0000000 | 000000 |
| 7 ft. | 1 1/8" | 1 1/4" | 250 lbs. for 18"-24" Cut Lengths, 540 lbs. Up to 18" Cut Lengths | 000000 | 000000 |
With Perforated Tread | |||||
| 5 ft. | 1 1/4" | 1 1/2" | 230 lbs. for 18"-24" Cut Lengths, 300 lbs. Up to 18" Cut Lengths | 00000000 | 00000 |
| 5 ft. | 2 1/4" | 1 1/2" | 380 lbs. for 18"-24" Cut Lengths, 510 lbs. Up to 18" Cut Lengths | 00000000 | 000000 |
Fold-Up Elevating Steps
Flip these steps down when you need them and fold them up out of the way when you don't.
Overall | Step | Mounting Holes | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. (A) | Wd. (B) | Dp. (C) | Wd. | Dp. | Tread | Projection | Wt., lbs. | Material | Cap., lbs. | Mounting Hardware Included | No. of | Dia. | Ctr.-to-Ctr. Ht. | Ctr.-to-Ctr. Wd. | Each | ||
| 1 | 3 3/8" | 2 3/8" | 5 5/8" | 1" | 4 1/4" | Serrated | 5 5/8" | 1 | 304 Stainless Steel | Not Rated | No | 4 | 3/16" | 2 5/8" | 1 3/4" | 0000000 | 000000 |
| 2 | 4 3/8" | 1 7/8" | 3 1/2" | 3 3/8" | 2" | Diamond Plate | 3 1/2" | 1 | 316 Stainless Steel | Not Rated | No | 2 | 5/16" | 3 5/8" | __ | 0000000 | 00000 |