Stainless Steel Strut Channel Clamps

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Mounting Location Mounting Location

Beam

	Top Plate Material Top Plate Material

7,301 Products

Clamps

Setup Clamps with Threaded Hole

Instead of a step block, support these clamps using a screw, leveling mount, or any other threaded object.

Swiveling Tips for Screws and Threaded Studs

Attach to the end of a screw or threaded stud to apply uniform pressure on uneven and angled surfaces. Also known as toggle and swivel-foot pads.

Nonmarring Swiveling Tips for
Screws and Threaded Studs

The contact area is covered in plastic to protect soft metal and polished surfaces. Attach these tips to the end of a screw or threaded stud to apply uniform pressure on uneven and angled surfaces. Also known as toggle and swivel-foot pads.

Swiveling Gripper Tips for Screws and Threaded Studs

Attach to the end of a screw or threaded stud—the serrated face swivels to grip uneven and angled surfaces. Also known as toggle and swivel-foot pads.

Create-Your-Own Workholders

Build a custom clamping system for holding lightweight objects such as beakers and laboratory equipment.

Pliers, Tweezers, and Tongs

Corrosion-Resistant Locking Pliers

Choose a stainless steel tool for environments where moisture and other contaminants are present. These pliers resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool. Lock the jaws around a workpiece and they stay clamped in a vise-like grip.

Tweezer-Style Bent-Nose Pliers

The smallest bent-nose pliers we offer allow you to work in the smallest spaces, including under a microscope. They have a bent nose to reach around closely spaced components.

Tweezer-Style Pliers Sets

Work under a microscope, and in other small spaces—the pliers in these sets are the smallest we offer.

Tweezer-Style Wire-Forming Pliers

The smallest round-nose pliers we offer allow you to bend and loop wire in the smallest spaces, including under a microscope.

Tweezer-Style Long-Nose Pliers

The smallest long-nose pliers we offer allow you to work in the smallest spaces, including under a microscope.

Locking Tongs for Small Parts

Also known as hemostats, these tongs enable intricate work in tight spaces and the jaws can be locked closed. The handle has interlocking teeth that allow you to adjust the clamping pressure.

Glassware Tongs

Get a firm grip on beakers and other containers in the curved jaws. You can also use the tips of these tongs to pick up small objects.

Pliers-Style Tongs

Keep hands away from machinery—use these lightweight tools to pick up and hold parts. The pliers-style handles provide more comfort and control than standard tongs.

Clamps for Firm Hose and Tube

General Purpose Worm-Drive
Clamps for Firm Hose and Tube

Easy to use, strong, and versatile, these hose clamps are the most common. Tighten their slotted screw with a screwdriver, hex nut driver, or wrench.

General Purpose Worm-Drive Clamp
Assortments for Firm Hose and Tube

General Purpose Worm-Drive Clamps with
Nonslip Screw for Firm Hose and Tube

A raised safety collar around the head of the screw prevents your screwdriver from slipping and damaging the hose or tube.

General Purpose Worm-Drive Clamps with
Thumb Screw for Firm Hose and Tube

A thumb screw instead of a slotted screw allows you to install these clamps without any tools.

General Purpose Bolt Clamps for Firm Hose

One clamp fits a wide range of diameters, so you can always have the right size on hand.

Build-Your-Own Worm-Drive
Clamps for Firm Hose and Tube

Here's everything you need to make your own 3" diameter and larger custom-length worm-drive clamps.

Vibration-Resistant Pinch
Clamps for Firm Hose and Tube

These clamps are easier to install than worm-drive clamps—crimp the pinch points with pinch-clamp pincers for a secure hold. They are also known as ear clamps.

Vibration-Resistant Pinch Clamp
Assortments for Firm Hose and Tube

These pinch clamps come packed in a box with individual compartments for each clamp size. Easier to install than worm-drive clamps, crimp the pinch points with pinch-clamp pincers for a secure hold. They’re commonly known as ear clamps.

Tight-Seal Vibration-Resistant Pinch
Clamps for Firm Hose and Tube

Unlike other pinch clamps, these have a unique tongue-and-groove design that creates a gap-free seal to reduce leaks.

Vibration-Resistant Worm-Drive
Clamps for Firm Hose and Tube

Unlike vibration-resistant pinch clamps, these have a torque rating for extra holding power in high-vibration applications. They are also known as high-torque clamps.

Tight-Seal Bolt Clamps for Firm Hose and Tube

These clamps form a 360° seal around your hose or tube to prevent leaks.

Constant-Tension Spring
Clamps for Firm Hose and Tube

Not as bulky as our other constant-tension clamps, these round-wire clamps easily fit in cramped spaces. Use in low-pressure applications.

Constant-Tension Bolt Clamps for Firm Hose and Tube

The T-bolt design provides excellent strength and creates a 360° seal. Clamps have a spring that automatically adjusts the clamp diameter when temperatures fluctuate.

Low-Profile Band Clamps for Firm Hose

These clamps are easier to install than our Extra-Strength Low-Profile Band Clamps. Also known as center-punch clamps, they seal with a quick hammer blow to the buckle.

Extra-Strength Low-Profile Band Clamps for Firm Hose

The end of the band curls back into the buckle—this gives these clamps up to 25% more strength than other low-profile clamps. They are also known as JS-style clamps.

Banding for Build-Your-Own
Low-Profile Band Clamps for Firm Hose

Keep this banding on hand for both permanent connections and emergency repairs. You'll need an installation tool and a buckle (both sold separately) to create a band clamp.

Buckles for Build-Your-Own Low-Profile
Band Clamps for Firm Hose

Designed for both permanent connections and emergency repairs, use these buckles with banding to create your own low-profile hose clamps.

Quick-Release Clamps for Firm Hose and Tube

Clamps have a slotted hex-head screw that flips up to release the band for quick opening.

Super-Corrosion-Resistant Smooth-Band
Worm-Drive Clamps for Firm Hose and Tube

Made of our most corrosion resistant stainless steel, these worm-drive clamps stand up to harsh acids and chemicals. Their band is smooth and has rolled edges, so they won’t cut into your hose or tube.

Pinch Clamps for Hard Plastic Tubing for Water

Used to secure Viega PEX fittings to Viega PEX tubing, these clamps meet an ASTM standard to ensure compatibility.

Easy-Turn Worm-Drive Clamps for Firm Hose and Tube

Twist the thumb head with your fingers to tighten these clamps. Once tightened, remove the thumb head to minimize your clamp’s profile and make it harder to tamper with.

Tamper-Resistant Worm-Drive
Clamps for Firm Hose and Tube

To prevent removal, these clamps can only be loosened with a special bit or screwdriver.

Clamps for Soft Hose and Tube

Worm-Drive Clamps with Smooth
Bands for Soft Hose and Tube

Clamps have a smooth band with rolled edges to prevent them from cutting into your hose or tube.

Worm-Drive Smooth-Band Clamp
Assortments for Soft Hose and Tube

Clamps come packed in a box with individual compartments for each clamp size. To make sure they won’t cut into hose and tube, they have a smooth band with rolled edges.

Worm-Drive Clamps for Soft Hose and Tube

An extended tail acts as a liner to protect hose and tube from being cut by the slots in the band.

Build-Your-Own Worm-Drive
Clamps for Soft Hose and Tube

Create 2" diameter and larger smooth-band worm-drive clamps.

High-Temperature Build-Your-Own
Worm-Drive Clamps for Soft Hose and Tube

Create 4" diameter and larger worm-drive clamps that withstand high-temperature applications.

Tight-Seal Bolt Clamps for Soft Hose and Tube

The bolt design provides high strength and creates a 360° seal to prevent leaks.

Tight-Seal Bolt Clamp Assortments
for Soft Hose and Tube

The hose clamps in these assortments have a bolt closure that creates a 360° leak-preventing seal. The clamps have rolled edges, so they won’t cut into hose and tube.

Tight-Seal Easy-Install Bolt
Clamps for Soft Hose and Tube

Remove the bolt and flip open the hinged bridge to install.

Vibration-Resistant Pinch
Clamps for Soft Hose and Tube

A dimple in the ear creates spring-like action that allows these clamps to withstand vibration and temperature changes without loosening.

Constant-Tension Clamps for Soft Hose and Tube

Don't worry about your hose and tube expanding and contracting when temperatures fluctuate—these clamps have a Bellville spring that automatically increases and decreases the clamp's diameter.

Quick-Release Clamps for Soft Hose and Tube

Flip up the slotted hex head screw to quickly release the band. These clamps have rounded edges and a smooth interior, so they won’t cut into hose and tube materials.

Duct Hose Clamps

Work-Load-Rated Quick-Release Duct Hose Clamps

Unlike other duct hose clamps, these are rated for a maximum work load. Clamps have a quick-release latch that lets you access your line frequently while maintaining your original clamp size.

Duct Hose Clamps for Spiral Duct

Also known as bridge clamps, these worm-drive clamps align with the spiral support on wire duct hose to provide a tight seal.

Duct Hose Clamps with Grounding Cable

Prevent static charge buildup while securely connecting duct hose with a wire spiral.

Tubing and Tube Fittings

Clamps for High-Polish Metal
Quick-Clamp Sanitary Tube Fittings

Connect quick-clamp sanitary tube fittings—also known as aseptic fittings—for a fast and easy way to access your line.

High-Polish Metal Quick-Clamp Sanitary Tube Fittings

The smooth finish inside these stainless steel quick-clamp fittings makes it easy to remove product residue.

Clamps for Extra-Support High-Polish
Metal Quick-Clamp Sanitary Tube Fittings

Connect extra-support quick-clamp fittings for a fast and easy way to access your line.

Extra-Support High-Polish Metal
Quick-Clamp Sanitary Tube Fittings

Also known as I-line fittings, these quick-clamp fittings permit easy access to your line.

Extra-High-Polish Metal
Quick-Clamp Sanitary Tube Fittings

Polished to a 20 Ra finish, these fittings have an extra-smooth interior that prevents product buildup and inhibits bacteria growth.

Quick-Clamp High-Vacuum
Fittings for Stainless Steel Tubing

Also known as KF, QF, and NW fittings, these fittings are for high-vacuum applications, such as vacuum coating and heat treating, leak testing, and analyzing gases.

High-Polish Gasket Fittings for Stainless Steel Tubing

Fittings are polished to a32 Ra and under finish on the interior.

Butt-Weld Fittings for Stainless Steel Tubing

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Through-Wall Fittings for High-Vacuum Chambers

Transfer liquids and gasses into high-vacuum chambers with these assembled fittings, also known as feedthroughs.

Repair Clamps for Steel Tubing

Repair pinholes, punctures, and cracks in low-pressure systems with these clamps. Insert tubing into the clamp and tighten the bolts to create a secure seal.

Clamps for Vacuum Fittings for Steel Tubing

Repair Clamps for Copper Tubing

Repair leaks in copper tubing.

Sanitary Sampling Stainless Steel Tube Fittings

Take samples in sanitary environments—these tube fittings won’t contaminate your lines or force you to pause them.

Pipe and Pipe Fittings

Low-Pressure Pipe Repair Clamps

Use in low-pressure applications up to 150 psi.

Medium-Pressure Pipe Repair Clamps

Use in medium-pressure applications up to 600 psi.

Low-Pressure Clamp-On Connectors for Water

Also known as no-hub couplings, these have a one-piece sleeve with a stop in the center, so you know your pipe is always aligned correctly.

Low-Pressure Quick-Lock Clamp-On Connectors for Air

A turn of the T-handle will tighten and loosen these connectors, so you can quickly disassemble and reassemble your lines without tools.

Medium-Pressure Clamp-On Connectors

Use in medium-pressure applications up to 230 psi.

Stainless Steel Clamping Two-Piece Pipe Collars

Often used in corrosive environments to support pipe passing through walls and floors, these collars are 303 stainless steel and sized specifically for a tight fit around pipe.

Clamps for Easy-Access UV-Resistant
Polypropylene Pipe Fittings for Chemicals

Use these clamps to connect easy-access UV-resistant polypropylene pipe fittings to pipe. The clamp-together design allows you to access your line for routine maintenance.

High-Vacuum Hose with Claw-Clamp Fittings

More flexible than rigid stainless steel tubing, this hose allows you to link high-vacuum components that are misaligned. Also known as bellows. Equipped with a claw-clamp (ISO-K) fitting on each end, this hose connects to large components with fittings starting at trade number 63.

Routing Clamps

Strut-Mount Metal Routing Clamps

Route pipe, tubing, and conduit across strut channel.

Strut-Mount Metal Routing Clamps for Insulated Pipe

Secure insulated pipe to strut channel without pinching the insulation or exposing the pipe. These clamps are sized for use with insulated pipe and have a plastic insert that creates a seal around the insulation to prevent the pipe from sweating, which can cause mold and corrosion.

Standoff Strut-Mount Metal Routing Clamps

Hold pipe, tubing, and conduit away from strut channel.

Narrow-Space Strut-Mount Metal Routing Clamps

Even when these clamps are installed side by side, the clamping screws remain accessible. Use them to route pipe, tubing, and conduit across strut channel.

Low-Profile Strut-Mount Metal Routing Clamps

For areas with low clearance, these clamps have the mounting fastener to the side of the material, rather than on top.

Routing Clamps

For use with a single line, these clamps brace pipe, tubing, and conduit directly against the mounting surface.

Strut-Mount Vibration-Damping Routing Clamps

Slide multiple clamps into existing strut channel to organize lines of pipe, tubing, and conduit without the need for drilling, welding, or using adhesive. Clamps have a plastic or rubber cushion or body to reduce vibration.

Weld-Mount Vibration-Damping Routing Clamps

For a more secure connection than rail- and adhesive-mount clamps, weld the bottom plate of these clamps onto your rails. They fit tightly around pressurized lines in hydraulic systems to lessen vibration.

Two-Line Weld-Mount
Vibration-Damping Routing Clamps

Secure two pressurized hydraulic lines with a single clamp to lessen vibration in hydraulic systems. Weld the bottom plate onto the mounting surface for a more secure connection than rail- and adhesive-mount clamps.

Vibration-Damping Routing Clamps

A rubber cushion reduces vibration and wear from clamp edges. The cushion also protects lines of pipe, tubing, and conduit from corrosion caused by metal-to-metal contact.

Rail-Mount Vibration-Damping Routing Clamps

For use with a single line, these clamps mount directly onto rails, no adhesive or welding required. They fit tightly around pressurized lines in hydraulic systems to lessen vibration.

Two-Line Rail-Mount
Vibration-Damping Routing Clamps

Secure two pressurized hydraulic lines with a single clamp. Mount these clamps directly onto rails, no adhesive or welding required. They fit tightly around the lines to reduce vibration.

Rails for Rail-Mount Vibration-Damping Routing Clamps

Bolt or weld these rails to the mounting surface, then attach clamps with a rail nut.

Lock-Close Strut-Mount Plastic Routing Clamps

Slide these clamps into strut channel and snap closed for quick installation with no tools required. They are noncorrosive, nonconductive nylon.

Cut-to-Length Routing Clamps

Customize these clamps to any object—they have a bend-and-stay design so you can mold them to the size and shape you need. Made of plastic-coated 316 stainless steel, they withstand abrasion, corrosion, and UV rays.

Loop Clamps

Snug-Fit Vibration-Damping Loop Clamps

A molded cushion reduces vibration and wear from clamp edges, plus it provides a tighter fit around material than standard vibration-damping loop clamps.

Vibration-Damping Loop Clamps

A cushion covering the clamp reduces vibration and wear from clamp edges. Clamps surround lines of pipe, tubing, and conduit completely while holding them close to the mounting surface.

Multiline Vibration-Damping Loop Clamps

Organize multiple lines of pipe, tubing, and conduit with one clamp. Wider than standard loop clamps, multiline loop clamps surround two lines of material to create a secure grip while holding the lines close to the mounting surface. A cushion covering the clamp reduces vibration and wear from clamp edges.

Loop Clamps

These clamps completely surround single lines of pipe, tubing, and conduit while holding them close to the mounting surface.

Adjustable Standoff Clamps

Tighten the bolt for an exact fit around material. Clamps secure vertical pipes in sanitation drain applications and prevent them from coming in contact with the mounting surface.

Riser Clamps

Support vertical pipes passing through floors.

Beam Clamps

Beam Clamps for Threaded Rod

Attach these clamps to the flange of an beam, then hang a threaded rod from the threaded hole.

Center-Mount Beam Clamps for Threaded Rod

For centered load distribution, these clamps grip both sides of the beam and hang threaded rod from the middle.

Beam Clamps for Strut Channel

Support strut channel at a right angle to the beam.

Beam Clamps for Pipe, Tube, and Conduit

These clamps have a fixed hanger for rigid connections.

Hangers for Pipe, Tube, and Conduit

Threaded-Rod-Mount Clamping Hangers

Also known as conduit hangers, these hangers load from the bottom so you can add or remove material without removing the mounted hanger.

Snug-Hold Threaded-Rod-Mount Clamping Hangers

Load material between the two halves of the ring and adjust the side bolts for a tighter fit than standard threaded-rod-mount clamping hangers.

Stackable Threaded-Rod-Mount Clamping Hangers

Mount these hangers on top of one another to organize multiple lines of pipe, tubing, and conduit at any angle.

Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Rubber cushions fit material tightly to reduce vibration and provide a more secure hold than loop hangers. The cushions also protect material from sharp edges and prevent corrosion caused by metal-to-metal contact.

Washdown Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

These hangers provide maximum corrosion resistance in wet environments and stand up to frequent washdowns with harsh cleaners and sanitizers. Rounded edges, polished surfaces, and acorn or hex nuts that conceal threads reduce the number of places for bacteria to grow and make them easier to clean.

Stackable Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Connect these hangers to organize multiple lines of pipe, tubing, and conduit. The tight-fitting, santoprene body reduces vibration and prevents corrosion caused by metal-to-metal contact.

Push-to-Lock Plastic Clamping Hangers

Lock your line in faster than any other hanger. These hangers automatically close when you press your line into the clamp.

Plastic Clamping Hangers

These plastic hangers prevent corrosion caused by metal-to-metal contact. Push them closed for a more secure hold on material than loop hangers.

Pivoting Threaded-Rod-Mount Loop Hangers

Also known as clevis hangers, these have a pivoting loop that adjusts for line movement and vibration. Combine with a threaded rod or other fastener to hang from the ceiling.

Stainless Steel Threaded-Rod-Mount Loop Hangers

Use these hangers in corrosive environments and where chemicals are present. They're also known as teardrop hangers. Combine with a threaded rod or other fastener to hang from the ceiling.

Side-Load Threaded-Rod-Mount Loop Hangers

Access material quickly without uninstalling the mounted hanger. These hangers have a removable bolt for loading pipe, tube, and conduit from the side. Combine them with a threaded rod or other fastener to hang from the ceiling.

Weld-Mount Clamping Hangers

For a strong, secure connection, mount these hangers by welding them to a rod.

Strap Hangers

Cut as much strap as you need to hang duct, pipe, and other materials.

U-Bolts

U-Bolt Mounting Plates

Add a mounting plate to your U-bolt for a more secure hold at the mounting surface.

U-Bolts

Mount these general purpose U-bolts into an existing bracket, or combine with a mounting plate for a secure hold at the mounting surface.

U-Bolts with Mounting Plates

A mounting plate provides a more secure hold at the mounting surface.

Clamping U-Bolts

Also known as muffler clamps, these U-bolts have a rounded mounting plate that fully surrounds pipe, conduit, and tubing for a secure fit.

Square U-Bolts

Suspend and route flat-bottomed objects such as strut channel and small duct.

Vibration-Damping U-Bolts

Reduce vibration and noise in your lines—a plastic cushion tightly grips pipe, tubing, and conduit to prevent movement. Nylon-insert locknuts grip the thread to resist loosening.

Rubber-Cushioned U-Bolts

A durable rubber cushion and mounting plate prevent corrosion and wear caused by metal-to-metal contact. The mounting plate is removable, so the U-bolts can be installed onto an existing line without needing to disassemble it.

Rubber-Cushioned Square U-Bolts

Reduce vibration and prevent metal-to-metal corrosion on flat-bottomed objects such as strut channel and small duct.

Threaded Rod Mounts

Fasten these brackets to ceilings, walls, beams, and joists to hang threaded rod.

Routing Ringbolts

Mount these ringbolts into a threaded hole, or use the nut for through-hole mounting. The pivoting ring allows material to move freely.

Floor Routing Supports

Floor-Mount Clamp-Style Supports

For a secure hold on pipe and conduit suspended above the ground, these supports have a cushioned clamp provides a 360° grip while reducing vibration.

Floor-Mount Saddle-Style Supports

These U-shaped supports allows access to pipe and conduit after installation.

Floor-Mount Flange-Style Supports

Bolt directly to a pipe flange to suspend a run of pipe above the ground.

Strut-Mount Routing Saddles for Insulated Pipe

Clip these saddles around the outside of strut channel for a quick way to route insulated tubing and pipe. Lips on either end of the saddle protect insulation from abrasion if the pipe should move.

Shaft Collars

Clamping Two-Piece Shaft Collars

These metal collars are stronger than plastic shaft collars.

Machinable-Bore Clamping Two-Piece Shaft Collars

Customize the bore of these collars to precisely fit your shaft.

Extra-Grip Clamping Two-Piece Shaft Collars

With larger screws than those found on standard clamping collars, these provide a stronger grip on your shaft without using additional screws.

Clamping Two-Piece Shaft Collars with Wrench Flats

Use a wrench to rotate your drive shaft without marring or gouging the shaft.

Extra-Wide Clamping Two-Piece Shaft Collars

Wider than standard shaft collars with twice the number of clamping screws, these ensure a better grip for greater holding power.

Quick-Release Two-Piece Clamping Shaft Collars

Make quick adjustments to these shaft collars with a lever on the side.

Inch-to-Metric Clamping Two-Piece Shaft Collars

Although these collars fit inch-sized shafts, they have a metric OD and width for use with metric equipment.

Set Screw Two-Piece Shaft Collars

Tighten the set screw to bite into an unhardened shaft for a secure hold.

Clamping Shaft Collars

These metal collars are stronger than plastic shaft collars.

Tight-Hold Quick-Release Clamping Shaft Collars

A threaded lever lets you tighten these collars with more torque than other quick-release styles, ensuring that they stay put on your shaft.

Quick-Connect Clamping Shaft Collars

Internal ball bearings allow you to slide a collar onto your shaft in one direction and then automatically lock the collar in place in the opposite direction.

Extra-Wide Clamping Shaft Collars

Wider than standard shaft collars with twice the number of clamping screws, these ensure a better grip for greater holding power.

Counterbalanced Clamping Shaft Collars

Formed to offset the weight of the clamping screw, these collars won't wobble or vibrate when shafts are spinning—even at high speeds.

Set Screw Shaft Collars

Keep these shaft collars in place by tightening their set screw into the shaft.

Hinged Shaft Collars

Offering the benefits of a two-piece collar in a one-piece design, these collars swing open for positioning then close anywhere on your shaft.

Face-Mount Shaft Collars

Two tapped holes on the face of these collars allow you to fasten them to gears, pulleys, and sprockets.

Top-and-Bottom Mount Two-Piece Shaft Collars

Secure items to either side of these collars—each half has a flat end with a tapped hole

Top-and-Bottom Mount Shaft Collars

Mount these collars flush against each other or attach components to either side—the round body has flattened ends with tapped holes.

Flange-Mount Shaft Collars

Three tapped counterbored holes and three through-holes provide mounting flexibility.

Support-Rail Shaft Collars

Slide these one-piece collars onto the end of your shaft to create an end-stop for linear components.

Bearing Retaining Nuts

Often paired with spring lock washers to strengthen their hold, these retaining nuts—also known as shaft nuts—keep vibration from shifting bearings, bushings, pulleys, and gears on your threaded shaft or spindle.

Bearing Retaining Locknuts

With a nylon insert that grips your threaded shaft or spindle without damaging its threads, these locknuts—also called shaft nuts—hold bearings, bushings, gears, and pulleys prone to vibration tightly in place.

Quick-Release Shaft Collar Handles

These threaded handles take the place of a set screw, allowing you to move set screw shaft collars without additional tools—useful for when the collar serves as a stroke limiter or mounting clamp.

D-Profile Shaft Collars

To install, slide these one-piece collars onto the end of your shaft.

D-Profile Two-Piece Shaft Collars

Install these collars anywhere on a shaft without removing components or having access to the ends of the shaft.

Threaded Shaft Collars

To install, thread these one-piece collars onto the end of your shaft.

Threaded Two-Piece Shaft Collars

Install these collars anywhere on a shaft without removing components or having access to the ends of the shaft.

Square Shaft Collars

Install these two-piece collars square shafts.

Hex Two-Piece Shaft Collars

Install these collars anywhere on a shaft without removing components or having access to the ends of the shaft.

Hex Shaft Collars

To install, slide these one-piece collars onto the end of your shaft.

Step-Down Shaft Adapters

Reduce the diameter of your shaft while adding length.

Indicator Swivel Clamps

Secure indicators, upright posts, attachments, and holding rods at any angle.

Knobs

Threaded-Stud Knobs

Mount these knobs into a threaded hole. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Easy-Clean Threaded-Stud Knobs

Suitable for food-processing areas, these one-piece knobs have no joints to collect dirt or debris. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery. Mount them into a threaded hole.

Left-Hand Threaded-Stud Knobs

Knobs have left-hand threads; they're used in applications where counterclockwise motion can loosen common right-hand threads. Mount them into a threaded hole to position, tighten, and hold fixtures, equipment, and machinery.

Threaded Through-Hole Knobs

Long shafts can thread through these knobs for mounting versatility. The knobs provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Threaded-Hole Knobs

Install these knobs on a threaded stud. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Sanitary Threaded-Hole Knobs

Designed for sanitary environments, these knobs are commonly used in pharmaceutical and food-processing facilities. Install them on threaded studs to position, tighten, and hold equipment.

Unthreaded-Hole Knobs

Tap custom threads or secure with a set screw to provide a firm grip to position, tighten, and hold fixtures, equipment, and machinery.

Unthreaded-Hole Knobs with Handle

A handle makes these knobs easy to turn. Tap custom threads or secure with a set screw to provide a firm grip to position, tighten, and hold fixtures, equipment, and machinery.

Machinable-Hub Knobs

Mill specific holes or keyways in the hub to meet your specifications, or weld in place. These knobs provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Machinable-Hub Knobs with Handle

A handle makes these knobs easy to turn. Mill specific holes or keyways in the hub to meet your specifications, or weld in place. These knobs provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Unthreaded Through-Hole Knobs

Create custom threads or secure with a set screw to provide a firm grip to position, tighten, and hold fixtures, equipment, and machinery. Long shafts can pass through these knobs for mounting versatility.

Steering Wheel Knobs

Often used on pallet and lift trucks, these knobs attach to steering wheels for one-hand operation.

Pull Knobs

Sanitary Threaded-Stud Pull Knobs

Thread these sanitary knobs into holes so you can open doors and drawers in hygienic environments.

Sanitary Threaded-Hole Pull Knobs

With a sanitary design, these threaded-hole knobs are often used to open and close doors and drawers on furniture, machines, and other equipment in pharmaceutical and food-processing facilities.

Draw Latches

Corner-Mount Draw Latches

These latches reach around outside corners to draw two surfaces together—use them to secure cases, toolboxes, and other containers.

Draw Latches with Safety Catch

To prevent accidental opening, these latches have a safety catch.

Gasket-Sealing Draw Latches with Safety Catch

A safety catch prevents accidental opening.

Clean Room Draw Latches

A plastic-coated handle and hook prevents the release of particles from metal-to-metal contact, which makes these latches good for clean room applications.

Tight-Hold Draw Latches

Designed with compression springs to withstand vibration better than standard draw latches, these offer a more secure hold.

Tight-Hold Draw Latches with Safety Catch

To prevent accidental opening, these latches have a safety catch.

T-Handle Tight-Hold Draw Latches

These latches are typically used to secure hoods and covers.

Corner-Mount Tight-Hold Draw Latches

Mount these latches on a corner to draw perpendicular surfaces together.

Ultra-Tight-Hold Draw Latches

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

Strikeless Draw Latches

No need for a strike plate, these latches hook into a lip or notch.

Strikeless Draw Latches with Safety Catch

A safety catch prevents accidental opening.

Adjustable-Grip Draw Latches

Adjust the latching distance for a tight fit over gasketing and to compensate for misalignment.

Adjustable-Grip Draw Latches with Safety Catch

These latches have a safety catch to prevent accidental opening.

Strikeless Adjustable-Grip Draw Latches

These latches hook into a lip or notch and have an adjustable latching distance to compensate for gasketing and misalignment.

Multiple-Strike Draw Latches with Safety Catch

To prevent accidental opening, these latches have a safety catch.

Multiple-Strike Draw Latches

Each latch comes with a variety of strike plates for different mounting options.

Turn-to-Open Draw Latches

Tight-Hold Turn-to-Open Draw Latches

With a spring-loaded handle, these hold tighter than other turn-to-open draw latches and compensate for slight misalignment.

Turn-to-Open Draw Latches

Lift and turn the handle 180° to open and close these latches.

Snap-Action Draw Latches

Slide-Snap Draw Latches

To secure overlapping components, pull the slide over the stud until they snap together. These latches resist shock and vibration.

Snap-Down Draw Latches

These latches snap in place to eliminate rattling and hold access doors, screens, windows, and panels.

Padlockable Draw Latches

Gasket-Sealing Padlockable
Draw Latches with Safety Catch

For use on gasketed doors, these latches use downward compression to pull surfaces together. They have a safety catch to prevent accidental opening.

Corner-Mount Tight-Hold Padlockable
Draw Latches with Safety Catch

Mount these latches on a corner to draw perpendicular surfaces together. They have a safety catch to prevent accidental opening.

Tight-Hold Padlockable Draw Latches

Secure surfaces together with these padlockable latches; built-in springs withstand vibration better than other latches.

Ultra-Tight-Hold Padlockable Draw Latches

An integrated slide bolt extends into the strike plate to resist pull and vibration from side-to-side, front-to-back, and up-and-down forces.

Adjustable-Grip Padlockable Draw Latches

Adjust the latching distance to compensate for gasketing and misalignment.

Strikeless Padlockable Draw Latches

No need for a strike plate, these latches hook into a lip or notch.

Turn-to-Open Padlockable Draw Latches

Lift and turn the handle 180° to open and close these latches. Add a padlock to secure.

Multiple-Strike Padlockable Draw Latches

Each latch comes with a variety of strike plates for different mounting options.

Keyed Corner-Mount Draw Locks

Secure cases, toolboxes, and other containers—these locks reach around outside corners to draw two surfaces together.

Gaskets for 37° Flared Tube Fittings

Prevent leaks from temperature fluctuations and vibration that can loosen 37° flared tube fittings.

Containers, Storage, and Furniture

Holders

Store tools such as brooms, cordless drills, screwdrivers, and flashlights.

Holder Racks

Racks have multiple holders to organize items.

Magnet-Mount Holders

Store tools such as brooms, screwdrivers, and flashlights with these holders that attach to magnetic surfaces.

Pegboard Holders

Store tools such as pliers, screwdrivers, and hammers.

Wall-Mount Cylinder Racks

Bench-Mount Cylinder Racks

Material Guiding Hardware for Conveyors

Conveyor Guide Clamps

Clamps hold guide rails in place or join ends of a rail together.

Corner Brackets for Conveyor Guide Clamps

Mounting Rod Brackets for Conveyors

Brackets mount to the frame of a conveyor to hold mounting rods.

Mounting Rods with Clamp for Conveyors

A clamp on one end grips conveyor guides or rods.

Mounting Rods for Conveyors

Use brackets and connectors to create vertical and horizontal support arms.

Mounting Rods with Bracket Base for Conveyors

These rods have a bracket on the base so they're ready to mount.

Mounting Rods with Sensor Holder for Conveyors

Use the hole at the end of these rods to attach sensors and accessories without clamps.

Graduated Mounting Rods for Conveyors

Graduated in 1/8" increments, these rods make it easy to align multiple brackets during installation.

Pivoting Mounting Rods for Conveyors

The pivoting joint on these rods makes angle-mounting easy.

Mounting Rod Connectors for Conveyors

Also known as cross blocks, connectors join rods at different angles.

Sensor and Reflector Brackets for Conveyors

Brackets are sized to mount sensors and reflectors to a conveyor frame.

Straight and L-Brackets for Conveyors

These brackets mount to the frame of a conveyor to hold guide clamps.

Lane Dividers for Conveyors

Keep materials orderly and separate products into distinct lanes.

Drip Pan Brackets for Conveyors

Suspend trays, plates, and drip pans underneath a conveyor.

Wire Rope End Fittings

Cast Wire Rope Clamps—Not for Lifting

Use in noncritical applications, such as fencing, where the strength of a forged clamp is not required. Install clamps so the saddle is on the long (live) end and the U-bolt is on the short (dead) end. They’re also known as wire rope clips.

Forged Stainless Steel Single-Saddle
Wire Rope Clamps—Not for Lifting

These clamps have a forged fabrication and are reliable in critical applications. They are not for making slings. These must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end. They’re also known as wire rope clips.

Easy-Install Wire Rope Clamps—Not for Lifting

Make a removable loop without specialty tools for use in noncritical applications, such as fencing. Also known as tiller clamps.

Wire Rope Compression Sleeves—For Lifting

These compression sleeves are designed to meet lifting specifications.

Clevis-End Plug-Lock Wire
Rope End Fittings—For Lifting

Install these clevis-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Eye-End Plug-Lock Wire Rope End Fittings—For Lifting

Install these eye-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Stud-End Plug-Lock Wire Rope End Fittings—For Lifting

Install these stud-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Mounting-Plate-End Compression-Grip
Wire Rope End Fittings—Not for Lifting

Compress the thin shank wall with a hand tool to attach these light duty mounting-plate-end fittings. They are also known as hand swage fittings.

Clevis-End Sleeve-Grip Wire
Rope End Fittings—Not for Lifting

Add a clevis end to wire rope without having to fray the rope or use a compression tool.

Eye-End Sleeve-Grip Wire Rope
End Fittings—Not for Lifting

Add an eye-end to wire rope without having to fray the rope or use a compression tool.

Eye-End Compression-Grip Wire
Rope End Fittings—Not for Lifting

Compress the thin shank wall with a hand tool to attach these light duty eye-end fittings. They are also known as hand swage fittings.

Stud-End Compression-Grip Wire
Rope End Fittings—Not for Lifting

Compress the thin shank wall with a hand tool to attach these light duty stud-end fittings. They are also known as hand swage fittings.

Rope and Chain Connectors

Carabiners—Not for Lifting

Quickly connect and disconnect these carabiners—they don’t lock.

Screw-Locking Carabiners—Not for Lifting

The most secure carabiner we offer, these carabiners won’t accidentally open when rope slides because you need to unscrew the latch to unlock them.

Twist-Locking Carabiners—Not for Lifting

Hold rope more securely than nonlocking and slide-release carabiners. While these carabiners are not as secure as screw-locking carabiners, they are easier to open.

Slide-Release Carabiners—Not for Lifting

Slide the lock down to open the latch and release it to lock these carabiners.

Snaps with Swivel Eye

These snaps have an eye that rotates for easy positioning.

Snaps with Eye

Create fast connections with items, such as rope, chain, and straps.

Light Duty Snaps with Swivel Eye for Webbing

Load-Rated Snaps with Eye

Load-Rated Snaps with Swivel Eye

Overlapping-Arm Snaps with Swivel Eye

The force of the load helps keep the arms closed. Press the trigger for quick connection and disconnection.

Slide-Bolt Snaps with Swivel Eye

Dual Slide-Bolt Snaps

Slide-Bolt Snaps with Flat Swivel Eye for Webbing

Slide-Bolt Snaps with Hook

Pin-Release Clevis Shackles—Not for Lifting

Attach a rope to the ring on the pin for remote release where access is limited. These shackes have a clevis end for making pivoting connections.

Pin-Release Eye Shackles—Not for Lifting

Attach a rope to the ring on the pin for remote release where access in limited. These shackles have an eye end for connecting to a hook.

T-Slotted Framing Storage Components

Stay organized with hooks, bin boxes, shelves, and tool holders that work with T-slotted framing.

Thumb Screws

Metric Stainless Steel Knurled-Head
Extended-Tip Thumb Screws

These metric thumb screws are made of chemical-resistant 18-8 stainless steel. Also known as dog- and pilot-point thumb screws, insert the point into a drilled hole or slot to hold items in place.

Stainless Steel Knurled-Head
Extended-Tip Thumb Screws

Made from 18-8 stainless steel, these thumb screws are chemical resistant. Also known as dog- and pilot-point thumb screws, insert the point into a drilled hole or slot to hold items in place.

Stainless Steel Low-Profile
Knurled-Head Thumb Screws

Made from 18-8 stainless steel, these thumb screws are chemical resistant. They have a thin, knurled head for use in low-clearance applications.

Slotted Stainless Steel Low-Profile
Knurled-Head Thumb Screws

These slotted thumb screws have a thin, knurled head for use in low-clearance applications. Made of 18-8 stainless steel, they are chemical resistant.

Metric Stainless Steel Low-Profile
Knurled-Head Thumb Screws

These metric thumb screws are made of chemical-resistant 18-8 stainless steel. They have a thin, knurled head for use in low-clearance applications.

Stainless Steel Flared-Collar
Knurled-Head Thumb Screws

Stainless steel thumb screws have excellent corrosion resistance in most environments.

Stainless Steel Raised Knurled-Head Thumb Screws

Made from 18-8 stainless steel, these thumb screws are chemical resistant. They have a raised head that makes them easy to grip.

Metric Stainless Steel Raised
Knurled-Head Thumb Screws

These metric thumb screws are made of chemical-resistant 18-8 stainless steel. They have a raised head that makes them easy to grip.

Stainless Steel High-Profile
Knurled-Head Thumb Screws

Stainless steel thumb screws have excellent corrosion resistance in most environments.

Narrow Knurled-Head Thumb Screws

Use these slim thumb screws in tight spaces.

Slotted Narrow Knurled-Head Thumb Screws

These slotted thumb screws are slim to fit in tight spaces.

Metric Narrow Knurled-Head Thumb Screws

With a slim profile, these metric thumb screws fit in tight spaces.

Large-Grip Plastic-Head Thumb Screws

A large head allows you to grip these screws with your entire hand for greater torque while tightening than standard knurled plastic-head thumb screws.

Metric Large-Grip Plastic-Head Thumb Screws

These metric thumb screws have a large head that allows you to grip them with your entire hand for greater torque while tightening than standard knurled plastic-head thumb screws.

Knurled Plastic-Head Thumb Screws

A knurled head allows for slip-resistant controlled adjustment.

Metric Knurled Plastic-Head Thumb Screws

These metric thumb screws have a knurled head for a slip-resistant controlled adjustment.

Two-Arm Plastic-Head Thumb Screws

Arms provide a flat surface to push your fingers against.

Plastic-Head Thumb Screws with Hex Drive

Tighten these thumb screws by hand or with a hex key for more torque.

Ultra-Fine-Thread Plastic-Head Thumb Screws

Fine threads give you precise control.

Sanitary Spade-Head Thumb Screws

Fasten material by hand, so tools don’t scratch or contaminate parts you frequently adjust in food-processing or pharmaceutical plants.

Stainless Steel Spade-Head Thumb Screws

Stainless steel thumb screws have excellent corrosion resistance in most environments.

Clamps

Setup Clamps with Threaded Hole

Swiveling Tips for Screws and Threaded Studs

Nonmarring Swiveling Tips forScrews and Threaded Studs

Swiveling Gripper Tips for Screws and Threaded Studs

Create-Your-Own Workholders

Create-Your-Own Workholders

Pliers, Tweezers, and Tongs

Corrosion-Resistant Locking Pliers

Tweezer-Style Bent-Nose Pliers

Tweezer-Style Pliers Sets

Tweezer-Style Wire-Forming Pliers

Tweezer-Style Long-Nose Pliers

Locking Tongs for Small Parts

Glassware Tongs

Pliers-Style Tongs

Clamps for Firm Hose and Tube

General Purpose Worm-DriveClamps for Firm Hose and Tube

General Purpose Worm-Drive ClampAssortments for Firm Hose and Tube

General Purpose Worm-Drive Clamps withNonslip Screw for Firm Hose and Tube

General Purpose Worm-Drive Clamps withThumb Screw for Firm Hose and Tube

General Purpose Bolt Clamps for Firm Hose

Build-Your-Own Worm-DriveClamps for Firm Hose and Tube

Vibration-Resistant PinchClamps for Firm Hose and Tube

Vibration-Resistant Pinch ClampAssortments for Firm Hose and Tube

Tight-Seal Vibration-Resistant PinchClamps for Firm Hose and Tube

Vibration-Resistant Worm-DriveClamps for Firm Hose and Tube

Tight-Seal Bolt Clamps for Firm Hose and Tube

Constant-Tension SpringClamps for Firm Hose and Tube

Constant-Tension Bolt Clamps for Firm Hose and Tube

Low-Profile Band Clamps for Firm Hose

Extra-Strength Low-Profile Band Clamps for Firm Hose

Banding for Build-Your-OwnLow-Profile Band Clamps for Firm Hose

Buckles for Build-Your-Own Low-ProfileBand Clamps for Firm Hose

Quick-Release Clamps for Firm Hose and Tube

Super-Corrosion-Resistant Smooth-BandWorm-Drive Clamps for Firm Hose and Tube

Pinch Clamps for Hard Plastic Tubing for Water

Easy-Turn Worm-Drive Clamps for Firm Hose and Tube

Tamper-Resistant Worm-DriveClamps for Firm Hose and Tube

Clamps for Soft Hose and Tube

Worm-Drive Clamps with SmoothBands for Soft Hose and Tube

Worm-Drive Smooth-Band ClampAssortments for Soft Hose and Tube

Worm-Drive Clamps for Soft Hose and Tube

Build-Your-Own Worm-DriveClamps for Soft Hose and Tube

High-Temperature Build-Your-OwnWorm-Drive Clamps for Soft Hose and Tube

Tight-Seal Bolt Clamps for Soft Hose and Tube

Tight-Seal Bolt Clamp Assortmentsfor Soft Hose and Tube

Tight-Seal Easy-Install BoltClamps for Soft Hose and Tube

Vibration-Resistant PinchClamps for Soft Hose and Tube

Constant-Tension Clamps for Soft Hose and Tube

Quick-Release Clamps for Soft Hose and Tube

Duct Hose Clamps

Work-Load-Rated Quick-Release Duct Hose Clamps

Duct Hose Clamps for Spiral Duct

Duct Hose Clamps with Grounding Cable

Tubing and Tube Fittings

Clamps for High-Polish MetalQuick-Clamp Sanitary Tube Fittings

High-Polish Metal Quick-Clamp Sanitary Tube Fittings

Clamps for Extra-Support High-PolishMetal Quick-Clamp Sanitary Tube Fittings

Extra-Support High-Polish MetalQuick-Clamp Sanitary Tube Fittings

Extra-High-Polish MetalQuick-Clamp Sanitary Tube Fittings

Quick-Clamp High-VacuumFittings for Stainless Steel Tubing

High-Polish Gasket Fittings for Stainless Steel Tubing

Butt-Weld Fittings for Stainless Steel Tubing

Through-Wall Fittings for High-Vacuum Chambers

Repair Clamps for Steel Tubing

Clamps for Vacuum Fittings for Steel Tubing

Repair Clamps for Copper Tubing

Sanitary Sampling Stainless Steel Tube Fittings

Pipe and Pipe Fittings

Low-Pressure Pipe Repair Clamps

Medium-Pressure Pipe Repair Clamps

Low-Pressure Clamp-On Connectors for Water

Low-Pressure Quick-Lock Clamp-On Connectors for Air

Medium-Pressure Clamp-On Connectors

Stainless Steel Clamping Two-Piece Pipe Collars

Clamps for Easy-Access UV-ResistantPolypropylene Pipe Fittings for Chemicals

High-Vacuum Hose with Claw-Clamp Fittings

High-Vacuum Hose with Claw-Clamp Fittings

Routing Clamps

Nonmarring Swiveling Tips for
Screws and Threaded Studs

General Purpose Worm-Drive
Clamps for Firm Hose and Tube

General Purpose Worm-Drive Clamp
Assortments for Firm Hose and Tube

General Purpose Worm-Drive Clamps with
Nonslip Screw for Firm Hose and Tube

General Purpose Worm-Drive Clamps with
Thumb Screw for Firm Hose and Tube

Build-Your-Own Worm-Drive
Clamps for Firm Hose and Tube

Vibration-Resistant Pinch
Clamps for Firm Hose and Tube

Vibration-Resistant Pinch Clamp
Assortments for Firm Hose and Tube

Tight-Seal Vibration-Resistant Pinch
Clamps for Firm Hose and Tube

Vibration-Resistant Worm-Drive
Clamps for Firm Hose and Tube

Constant-Tension Spring
Clamps for Firm Hose and Tube

Banding for Build-Your-Own
Low-Profile Band Clamps for Firm Hose

Buckles for Build-Your-Own Low-Profile
Band Clamps for Firm Hose

Super-Corrosion-Resistant Smooth-Band
Worm-Drive Clamps for Firm Hose and Tube

Tamper-Resistant Worm-Drive
Clamps for Firm Hose and Tube

Worm-Drive Clamps with Smooth
Bands for Soft Hose and Tube

Worm-Drive Smooth-Band Clamp
Assortments for Soft Hose and Tube

Build-Your-Own Worm-Drive
Clamps for Soft Hose and Tube

High-Temperature Build-Your-Own
Worm-Drive Clamps for Soft Hose and Tube

Tight-Seal Bolt Clamp Assortments
for Soft Hose and Tube

Tight-Seal Easy-Install Bolt
Clamps for Soft Hose and Tube

Vibration-Resistant Pinch
Clamps for Soft Hose and Tube

Clamps for High-Polish Metal
Quick-Clamp Sanitary Tube Fittings

Clamps for Extra-Support High-Polish
Metal Quick-Clamp Sanitary Tube Fittings

Extra-Support High-Polish Metal
Quick-Clamp Sanitary Tube Fittings

Extra-High-Polish Metal
Quick-Clamp Sanitary Tube Fittings

Quick-Clamp High-Vacuum
Fittings for Stainless Steel Tubing

Clamps for Easy-Access UV-Resistant
Polypropylene Pipe Fittings for Chemicals

Two-Line Weld-Mount
Vibration-Damping Routing Clamps

Two-Line Rail-Mount
Vibration-Damping Routing Clamps

Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Washdown Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Stackable Vibration-Damping
Threaded-Rod-Mount Clamping Hangers