ANSI/ASSP Standard Stairs | McMaster-Carr

Filter by

System of Measurement

Platform Height

Number of Steps

Component

Platform Handrail

Platform Section

Platform Support

Ground Clearance Height

Material

Landing Height

Step Width

Step Tread

Overall Width

Length

Overall Height

Ladder Type

Overall Depth

Width

Specifications Met

ANSI/ALI Standard

ANSI/ASSP Standard

ANSI/ASSP A1264.1

ANSI/MSS SP-58 Type 23

Cal/OSHA Standard

Platform Depth

Climbing Angle

Weight Capacity

500 lb. to 999 lb.

Platform Width

Height

DFARS Specialty Metals

REACH

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

RoHS

Export Control Classification Number (ECCN)

How can we improve?

54 Products

Build-Your-Own Fixed Work Platforms

Image of System. Shown Assembled. Front orientation. Contains Annotated. Work Platforms. Build-Your-Own Fixed Work Platforms.

Shown Assembled

Configure a work platform to fit your application.

First, determine how high your work platform needs to be and choose the stairs that accommodate that height. Then, choose a platform section based on the desired length. Next, choose platform supports that correspond to the height of your stairs—each end of the platform must be supported by a platform support. Finally, choose handrails for the stairs and platform. Assembled work platforms should be secured to a supporting surface (mounting hardware not included).

Stairs

Aluminum—Made of aluminum, these platforms are lightweight and corrosion resistant.

Serrated Step—Steps are serrated for maximum slip resistance.

Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.

			Steps								Mounting Holes
	Platform Ht.	Ground Clearance Ht.	No. of	Wd.	Dp.	Tread	Climbing Angle	Wt. Cap., lb.	Assembly	Mounting Hardware Included	No. of	Dia.	Specs. Met		Each
Aluminum



		18"	14"	1	24"	9 1/2"	Serrated	45°	500	Unassembled	No	4	7/16"	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N41	0000000


		27"	23"	2	24"	9 1/2"	Serrated	45°	500	Unassembled	No	4	7/16"	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N42	000000
		36"	32"	3	24"	9 1/2"	Serrated	45°	500	Unassembled	No	4	7/16"	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N43	000000
		45"	41"	4	24"	9 1/2"	Serrated	45°	500	Unassembled	No	4	7/16"	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N44	000000
		54"	50"	5	24"	9 1/2"	Serrated	45°	500	Unassembled	No	4	7/16"	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N45	000000
		63"	59"	6	24"	9 1/2"	Serrated	45°	500	Unassembled	No	4	7/16"	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N46	000000
		72"	68"	7	24"	9 1/2"	Serrated	45°	500	Unassembled	No	4	7/16"	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N47	000000
		81"	77"	8	24"	9 1/2"	Serrated	45°	500	Unassembled	No	4	7/16"	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N48	000000

Stair Handrails

Aluminum—Made of aluminum, these platforms are lightweight and corrosion resistant.

Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.

	For Platform Ht.	Ht.	Assembly	Specs. Met		Each
Aluminum



		18"	36 1/2"	Unassembled	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N61	000000


		27"	36 1/2"	Unassembled	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N62	000000
		36"	36 1/2"	Unassembled	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N63	000000
		45"	36 1/2"	Unassembled	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N64	000000
		54"	36 1/2"	Unassembled	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N65	000000
		63"	36 1/2"	Unassembled	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N66	000000
		72"	36 1/2"	Unassembled	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N67	000000
		81"	36 1/2"	Unassembled	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N68	000000

Platform Supports

Aluminum—Made of aluminum, these platforms are lightweight and corrosion resistant.

Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.

				Mounting Holes
	For Platform Ht.	Assembly	Mounting Hardware Included	No. of	Dia.	Includes	Specs. Met		Each
Aluminum



		18"	Unassembled	No	10	7/16"	2 Platform Support Legs	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N51	0000000


		27"	Unassembled	No	10	7/16"	2 Platform Support Legs	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N52	000000
		36"	Unassembled	No	10	7/16"	1 Platform Support with 2 Legs	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N53	000000
		45"	Unassembled	No	10	7/16"	1 Platform Support with 2 Legs	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N54	000000
		54"	Unassembled	No	10	7/16"	1 Platform Support with 2 Legs	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N55	000000
		63"	Unassembled	No	10	7/16"	1 Platform Support with 2 Legs	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N56	000000
		72"	Unassembled	No	10	7/16"	1 Platform Support with 2 Legs	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N57	000000
		81"	Unassembled	No	10	7/16"	1 Platform Support with 2 Legs	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N58	000000

Platform Sections

Aluminum—Made of aluminum, these platforms are lightweight and corrosion resistant.

Serrated—Platform is serrated for maximum slip resistance.

Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.

	Lg.	Wd.	Wt. Cap., lb.	Platform Tread	Assembly	Specs. Met		Each
Aluminum



		30"	30"	500	Serrated	Unassembled	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N71	0000000


		60"	30"	500	Serrated	Unassembled	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N72	000000
		90"	30"	500	Serrated	Unassembled	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N11	00000000
		120"	30"	500	Serrated	Unassembled	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N73	00000000

Platform Handrails

Platform handrails have built-in toeboards.

Aluminum—Made of aluminum, these platforms are lightweight and corrosion resistant.

Specifications Met—Work platforms meet OSHA dimensional standards. Users are responsible for checking local, state, and federal codes, including OSHA, for safe installation and operating practices. Work platforms also meet CAL-OSHA standards, which is required for use in California.

	For Platform Lg.	Ht.	Toeboard Ht.	Assembly	Specs. Met		Each
Aluminum



		30"	42"	4"	Unassembled	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N81	0000000


		60"	42"	4"	Unassembled	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3209, Cal/OSHA Compliant Title 8 Section 3622, OSHA Compliant 29 CFR 1910 Subpart D	4198N82	000000

Forward Descent Space-Saving Stairs

Image of ProductInUse. Front orientation. Stairs. Forward Descent Space-Saving Stairs.

These stairs have offset steps that allow for a comfortable and safe forward descent. Set at a steeper angle than our standard stairs, they require less floor space. Steps are perforated for good slip resistance.

Note: Stairs meet OSHA or Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

Also Available: Other landing heights (dimension A) from 3 _1/2 feet up to 20 feet. Please select 7946T9 and specify height in inches. To determine the price, multiply your landing height in inches by $20.20 and add $362.28.

Cal/OSHA Compliant

Image of Attribute. Side1 orientation. Contains Annotated, Border. Forward Descent Space-Saving Stairs.

		Overall				Step				Handrail
	Landing Ht. (A), ft.	Wd.	Dp. (B)	Climbing Angle	No. of Steps	Dp.	Tread	Material	Color	Ht.	Color	Mounting Hardware Included	Assembly	Specs. Met	Flammability Rating		Each
600 lb. Capacity







				9" Wide Steps

				4	23"	26"	68°	6	10 1/2"	Perforated	Powder-Coated Steel	Yellow	42"	Yellow	No	Unassembled	Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.28, ANSI/ASSP A1264.1	NFPA 101 7.2.11	7946T91	000000000


				5	23"	31"	68°	7	10 1/2"	Perforated	Powder-Coated Steel	Yellow	42"	Yellow	No	Unassembled	Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.28, ANSI/ASSP A1264.1	NFPA 101 7.2.11	7946T92	00000000
				6	23"	36"	68°	8	10 1/2"	Perforated	Powder-Coated Steel	Yellow	42"	Yellow	No	Unassembled	Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.28, ANSI/ASSP A1264.1	NFPA 101 7.2.11	7946T93	00000000
				7	23"	40"	68°	10	10 1/2"	Perforated	Powder-Coated Steel	Yellow	42"	Yellow	No	Unassembled	Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.28, ANSI/ASSP A1264.1	NFPA 101 7.2.11	7946T94	00000000
				8	23"	45"	68°	11	10 1/2"	Perforated	Powder-Coated Steel	Yellow	42"	Yellow	No	Unassembled	Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.28, ANSI/ASSP A1264.1	NFPA 101 7.2.11	7946T95	00000000
				9	23"	50"	68°	12	10 1/2"	Perforated	Powder-Coated Steel	Yellow	42"	Yellow	No	Unassembled	Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.28, ANSI/ASSP A1264.1	NFPA 101 7.2.11	7946T96	00000000
				10	23"	55"	68°	14	10 1/2"	Perforated	Powder-Coated Steel	Yellow	42"	Yellow	No	Unassembled	Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.28, ANSI/ASSP A1264.1	NFPA 101 7.2.11	7946T97	00000000
				11	23"	60"	68°	15	10 1/2"	Perforated	Powder-Coated Steel	Yellow	42"	Yellow	No	Unassembled	Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.28, ANSI/ASSP A1264.1	NFPA 101 7.2.11	7946T98	00000000
				12	23"	65"	68°	16	10 1/2"	Perforated	Powder-Coated Steel	Yellow	42"	Yellow	No	Unassembled	Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.28, ANSI/ASSP A1264.1	NFPA 101 7.2.11	7946T99	00000000
				13	23"	70"	68°	18	10 1/2"	Perforated	Powder-Coated Steel	Yellow	42"	Yellow	No	Unassembled	Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.28, ANSI/ASSP A1264.1	NFPA 101 7.2.11	7946T11	00000000
				14	23"	74"	68°	19	10 1/2"	Perforated	Powder-Coated Steel	Yellow	42"	Yellow	No	Unassembled	Cal/OSHA Compliant Title 8 Section 3234, OSHA Compliant 29 CFR 1910.25, OSHA Compliant 29 CFR 1910.28, ANSI/ASSP A1264.1	NFPA 101 7.2.11	7946T12	00000000

Tilt-to-Roll Work Platforms


	Serrated Step

Tip these platforms onto their casters to roll them wherever you need them—they give you a step up to your work and a large surface to stand on.

Powder-Coated Steel—Made from steel, these platforms are durable enough to last on shop floors or assembly lines. Their powder coating helps prevent rust.

Serrated—The surface is serrated to prevent slips and allow liquid and debris to fall through.

Nonskid Feet—When you set them down, their rubber feet grip the floor and keep them from moving.

Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

	Platforms																Replacement Rigid Casters		Replacement Nonskid Ladder Feet
	Platform			Overall		Steps
	Wd. (C)	Dp. (D)	Tread	Wd. (A)	Dp. (B)	Wd. (E)	Dp. (F)	Tread	Wt. Cap., lb.	Wt., lb.	Assembly	Wheel Configuration	Features	Specs. Met		Each		Each	Material		Each
Gray Powder-Coated Steel







				20" High

				24"	35"	Serrated	30"	46"	24"	10"	Serrated	800	65	Assembled	Two Rigid Casters	Nonskid Feet	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D	9261N11	0000000	9261N15	000000	Rubber	9261N16	000000


				24"	47"	Serrated	30"	58"	24"	10"	Serrated	800	72	Assembled	Two Rigid Casters	Nonskid Feet	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D	9261N12	000000	9261N15	00000	Rubber	9261N16	00000
				36"	35"	Serrated	42"	46"	36"	10"	Serrated	800	88	Assembled	Two Rigid Casters	Nonskid Feet	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D	9261N13	000000	9261N15	00000	Rubber	9261N16	00000
				36"	47"	Serrated	42"	58"	36"	10"	Serrated	800	112	Assembled	Two Rigid Casters	Nonskid Feet	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D	9261N14	000000	9261N15	00000	Rubber	9261N16	00000

Rolling Work Platforms

Equipped with four casters, these platforms are easy to move between work areas. When you stand on these platforms, the spring-loaded casters automatically retract for a stable surface.

Style 2

Image of Attribute. Front orientation. Contains Annotated. Work Platforms. Rolling Work Platforms, Style 2.

Style 2 have handrails on both sides and guardrails around the platform for extra stability.

Powder-Coated Steel—Powder-coated steel platforms withstand heavy use in most industrial applications and resist rust.

Serrated Step—Serrated treads give you maximum slip resistance and allow liquids and debris to pass through.

Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

	Platforms																Replacement Swivel Casters		Replacement Rigid Casters		Replacement Nonskid Ladder Feet
		Platform		Overall		Steps
	Max. Platform Ht.	Wd.	Dp.	Wd. (B)	Dp. (C)	Wd.	Dp.	Tread	Wt. Cap., lb.	Wt., lb.	Assembly	Wheel Configuration	Features	Specs. Met		Each		Each		Each	Material		Each
Gray Powder-Coated Steel







				56" Overall Height (A)

				20"	24"	35"	34"	54"	24"	10"	Serrated	800	91	Assembled	Two Rigid Casters and Two Swivel Casters	Handrail, Nonskid Feet	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D	9248N24	0000000	9248N28	000000	9261N15	000000	Rubber	9261N16	000000


				20"	24"	47"	34"	66"	24"	10"	Serrated	800	98	Assembled	Two Rigid Casters and Two Swivel Casters	Handrail, Nonskid Feet	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D	9248N25	000000	9248N28	00000	9261N15	00000	Rubber	9261N16	00000
				20"	36"	35"	40"	54"	36"	10"	Serrated	800	122	Assembled	Two Rigid Casters and Two Swivel Casters	Handrail, Nonskid Feet	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D	9248N26	000000	9248N28	00000	9261N15	00000	Rubber	9261N16	00000
				20"	36"	47"	40"	66"	36"	10"	Serrated	800	148	Assembled	Two Rigid Casters and Two Swivel Casters	Handrail, Nonskid Feet	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D	9248N27	000000	9248N28	00000	9261N15	00000	Rubber	9261N16	00000

Style 3

Image of Attribute. Front orientation. Contains Annotated. Work Platforms. Rolling Work Platforms, Style 3.

Style 3 have a handrail on only one side for unrestricted access to a conveyor or machinery.

Aluminum—Aluminum platforms are lighter weight than steel platforms and resist corrosion.

Serrated Step—Serrated treads give you maximum slip resistance and allow liquids and debris to pass through.

Specifications Met—Work platforms meet OSHA and Cal/OSHA dimensional and construction standards. Check local, state, and federal codes, including OSHA, for safe set up and operating practices.

		Platform		Overall		Steps
	Max. Platform Ht.	Wd.	Dp.	Wd. (B)	Dp. (C)	Wd.	Dp.	Tread	Wt. Cap., lb.	Wt., lb.	Assembly	Wheel Configuration	Features	Specs. Met		Each
Aluminum







				50" Overall Height (A)

				20"	24"	24"	28"	46"	24"	10 1/2"	Serrated	500	40	Unassembled	Four Swivel Casters	Handrail, Nonskid Feet	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D	8561T1	0000000


				20"	24"	39 1/2"	28"	62"	24"	10 1/2"	Serrated	500	50	Unassembled	Four Swivel Casters	Handrail, Nonskid Feet	ANSI/ASSP A1264.1, Cal/OSHA Compliant Title 8 Section 3622, Cal/OSHA Compliant Title 8 Section 3626, Cal/OSHA Compliant Title 8 Section 3627, OSHA Compliant 29 CFR 1910 Subpart D	8561T2	000000

back to top

The quick brown fox jumped over the lazy dog. Pedestal (35" Ht. x 4" Wd. x 4" Dp.)