Add your own ink to these pads.

Fit the punches in these sets through existing holes and mark the center of the hole in a second workpiece.

Insert these punches into an existing hole and twist the handle to open the end of the punch. The point automatically centers once the punch has fit the hole size.

Also known as blind-hole spotters, the punches in these sets fit into closed-end holes and mark the center of a complementary hole.

The punches in these sets have a uniform shoulder height so you can quickly transfer multiple hole locations at once. Also known as transfer screws.

Also known as transfer screws, the punches in these sets can be used in any threaded hole to transfer the hole location. Use the handle to screw a punch into a hole.

Use these punches to make round holes up to 1" dia. in fabric, leather, and rubber.

For accurate punching of inner and outer holes, these sets come with pilots that attach to the outer hole punch.

Attach two punch heads to the handle at the same time to punch a gasket or washer in a single strike.

Screw one of the interchangeable heads into the included handle to create holes up to 3/16" dia. in tight spaces.

Forged steel makes the body of this punch more durable than the Economy Plier-Action Multiple-Size Hole Punch.

Squeeze the spring-return handle to punch round holes of a single size.

Turn the handle of these punches while pushing down to punch holes in cork and rubber.

About half the size of a standard portable lever-operated punch, these punches can fit in your toolbox.

Deliver nearly three times the punching force of a standard portable lever-operated punch by holding one handle and turning the other 360°.

A throat depth more than double those of standard bench-mount lever-operated punches allows this tool to reach further past the edge of material.

Our most powerful lever-operated punch, the rotary-action socket turns to deliver two to three times the punching force of other bench-mount lever-operated punches.

Make clean, fast cuts in thin metal and plastic when you use one of these saws with an impact driver. The body widens at the top to prevent the saw from pushing through your workpiece.

Cut through spot welds on sheet metal and make faster, more precise cuts than drill bits and other hole saws.

These saws reduce friction and prevent material buildup when cutting fiberglass and plastic.

Specially designed teeth cut faster than the teeth on standard hole saws.

These saws have high-speed steel teeth.

The carbide-tipped teeth on these saws last up to twice as long as high-speed steel teeth.

These saws have carbide-grit-coated teeth.

The saws in these kits have carbide-tipped teeth, so they last up to twice as long as saws with high-speed steel teeth.

Lower cutting depths than standard hole saws make these saws less likely to rip or tear while making smooth, burr-free cuts in sheets.

Pads are marked with inch and centimeter grid lines to guide your cut.

When one side wears out, use the other one. Also known as barrel drift pins.

Often called bull pins, these pins are designed to resist mushrooming caused by repeated pounding.

When one side wears out, use the other one.

A 60° beveled head fits into a countersunk hole.

Push parts out of molds with these hardened pins. Also known as knockout and forged pins.

Record attendance by punching in and out on time cards.

These clocks save you time at the end of a pay period by automatically totaling each employee’s hours on their time cards.

These clocks scan employee fingerprints to register attendance.