Strengthen corners of cases and crates.

Clamp these brackets to panel edges to quickly assemble crates.

Lock these brackets together with a pin or a bolt. They are often used on marine docks.

Machine holes and slots or weld in place.

Machine holes and slots or weld in place.

Machine holes and slots or weld in place.

These brackets come in one piece that can be cut-to-size with a hacksaw.

A built-in level makes it easy to align panels.

Often used in washrooms, these brackets mount panels and partitions.

Use four brackets to support the top and bottom edges of panels without drilling holes in them.

Pivots provide smooth motion at the junction between two T-slotted rails.

These rails have continuous T-slots for attaching fittings. Use this versatile framing to configure machine guards, enclosures, carts, and workstations.

Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.

Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.

Attach and position phones, tablets, monitors, and other displays on T-slotted rails.

Use hinges to add doors, lids, and machine guards to T-slotted framing.

Slide drawers, panels, and doors with these tracks and rollers.

Bumpers cushion doors and other moving parts to prevent damage and reduce noise.

Align and drill accurate holes in T-slotted rails with these reusable templates.

Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.

These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.

Support the corners of strut channel structures.

Securely fasten strut channel to the floor.

Mount a length of strut channel between the ends of a beam to run cable and conduit along the beam without drilling.

Serrated grooves grip the lip of the channel.

Connect two channels to create a stacked channel.

Quickly attach these nuts by twisting them closed at any point along a threaded rod.

Insert these nuts into the long open side of strut channel and twist to secure. A built-in washer enables one-handed installation.

A tab fits tightly against the lip of the channel to keep these nuts from slipping.

Keep hardware centered in the strut channel slot.

Add hardware to strut channel without having to hold the washer in place or reach inside the channel.

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.

This welded, one-piece strut channel combines two strut channels back-to-back.

For compatibility with quick-connect clamps to secure pipe and conduit without screws and tools, this strut channel has narrow slotted holes.

Cover rough ends of strut channel.

For quick mounting of components, these hangers snap into strut channels for a strong hold and easy repositioning.

Create a four-sided raceway for cable, or give a more finished look to strut channel structures.

Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this steel bolt-together framing to build guards, tables, and racks.

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

To provide corrosion resistance in wet environments, this framing is galvanized.

Thick construction makes this framing strong and sturdy.

Create posts of varying lengths.

An anodized coating forms a bond with the aluminum surface to improve wear and corrosion resistance.

The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.

Easier to bend and shape than 6061 aluminum, this aluminum is good for framing, cross sections, and structures in construction and marine industries.

While 2024 aluminum was initially designed for structural components in aircraft, it's now widely used when a high strength-to-weight ratio is needed. It offers similar performance to 7075 aluminum, but it’s not as strong.

Originally developed for aircraft frames, uses for 7075 aluminum now include a wide range of high-stress parts. It is often used as a replacement for 2024 aluminum because it’s stronger and provides similar performance in all other aspects.

These 90° angles are zinc galvanized for good corrosion resistance.

Made of stiff low-carbon steel to deflect less under load, these H-bars are commonly used in machine bases, construction, platforms, and frames.

Made of rigid low-carbon steel, these I-beams are often used in construction, framing, lifting, and hoisting applications.

The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.

These brackets allow you to lower your shelf 10 or 20 degrees.

These brackets have greater weight capacities than standard duty fold-away shelf brackets.

Ensure accurate right angles and hold workpieces and fixtures perpendicular to a machine table by securing them to these plates with clamps.

The handle extends the full length and height of these plates for use on any of their six sides.

Use the tapped holes to mount your work.

Use these tight-tolerance blocks as mounting bases and supports to ensure accurate angles and spacing.

Pair these 90° angle brackets with ball socket end fittings to mount your gas spring in almost any position.

Suitable for use near sensitive electronic applications, these ball stud mounting brackets are aluminum, which is nonmagnetic.

Made from stainless steel for excellent corrosion resistance in damp environments.

Pair these 90° angle offset-arm brackets with ball socket end fittings to mount your gas spring in almost any position.

Because PVC resists many acids and alkalies, it’s widely used for tanks and in chemical-processing applications. Also known as PVC Type 1.

Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.

An alternative to wood in structural applications, FRP fiberglass is strong and lightweight.

Offering excellent arc and track resistance, this GPO3 fiberglass is often used for electrical applications in humid environments.

Unlike similar U-channels, these GPO3 fiberglass hat channels have flanges for mounting to flat surfaces. Use them to route and insulate wire in humid environments.

Lighter than aluminum while remaining rigid, these angles are often used as brackets in structural framing, machinery, and robotics.