About Tapping Screws
More
About Hex Head Screws and Bolts
More
Sealing Hex Head Screws
An O-ring under the head prevents leaks and seals out contaminants. Made of silicone, the O-ring withstands salt water, most acids, and temperatures up to 400° F. These 18-8 stainless steel screws have good chemical resistance and may be mildly magnetic. They are reusable. Length is measured from under the head.
Replacement silicone O-rings are sold separately. Choose fluoroelastomer O-rings when you need oil and chemical resistance.
For technical drawings and 3-D models, click on a part number.
Fully Threaded
Partially Threaded
Head | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Threading | Min. Thread Lg. | Thread Spacing  | Wd. | Ht. | For Maximum Hole Diameter | Max. Pressure, psi | O-Ring Material | O-Ring Temperature Range, °F | Tensile Strength, psi | Each | |
18-8 Stainless Steel | ||||||||||||
6-32 | ||||||||||||
| 1/4" | Fully Threaded | __ | Coarse | 1/4" | 3/32" | 0.151" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 00000 |
| 3/8" | Fully Threaded | __ | Coarse | 1/4" | 3/32" | 0.151" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 1/2" | Fully Threaded | __ | Coarse | 1/4" | 3/32" | 0.151" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
8-32 | ||||||||||||
| 1/4" | Fully Threaded | __ | Coarse | 1/4" | 7/64" | 0.177" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 3/8" | Fully Threaded | __ | Coarse | 1/4" | 7/64" | 0.177" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 1/2" | Fully Threaded | __ | Coarse | 1/4" | 7/64" | 0.177" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 3/4" | Fully Threaded | __ | Coarse | 1/4" | 7/64" | 0.177" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
10-32 | ||||||||||||
| 1/4" | Fully Threaded | __ | Fine | 1/8" | 5/16" | 0.2" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 3/8" | Fully Threaded | __ | Fine | 1/8" | 5/16" | 0.2" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 1/2" | Fully Threaded | __ | Fine | 1/8" | 5/16" | 0.2" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 3/4" | Fully Threaded | __ | Fine | 1/8" | 5/16" | 0.2" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
1/4"-20 | ||||||||||||
| 1/4" | Fully Threaded | __ | Coarse | 7/16" | 5/32" | 0.269" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 3/8" | Fully Threaded | __ | Coarse | 7/16" | 5/32" | 0.269" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 1/2" | Fully Threaded | __ | Coarse | 7/16" | 5/32" | 0.269" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 3/4" | Fully Threaded | __ | Coarse | 7/16" | 5/32" | 0.269" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 1" | Fully Threaded | __ | Coarse | 7/16" | 5/32" | 0.269" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 1 1/4" | Fully Threaded | __ | Coarse | 7/16" | 5/32" | 0.269" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 1 1/4" | Partially Threaded | 3/4" | Coarse | 7/16" | 5/32" | 0.269" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 1 1/2" | Partially Threaded | 3/4" | Coarse | 7/16" | 5/32" | 0.269" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 2" | Partially Threaded | 3/4" | Coarse | 7/16" | 5/32" | 0.269" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 2 1/2" | Partially Threaded | 3/4" | Coarse | 7/16" | 5/32" | 0.269" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
5/16"-18 | ||||||||||||
| 1/2" | Fully Threaded | __ | Coarse | 1/2" | 13/64" | 0.336" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 5/8" | Fully Threaded | __ | Coarse | 1/2" | 13/64" | 0.336" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 3/4" | Fully Threaded | __ | Coarse | 1/2" | 13/64" | 0.336" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 1" | Fully Threaded | __ | Coarse | 1/2" | 13/64" | 0.336" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 1 1/4" | Fully Threaded | __ | Coarse | 1/2" | 13/64" | 0.336" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 1 1/4" | Fully Threaded | 7/8" | Coarse | 1/2" | 13/64" | 0.336" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 1 1/2" | Partially Threaded | 7/8" | Coarse | 1/2" | 13/64" | 0.336" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 2" | Partially Threaded | 7/8" | Coarse | 1/2" | 13/64" | 0.336" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 00000 |
3/8"-16 | ||||||||||||
| 1/2" | Fully Threaded | __ | Coarse | 9/16" | 15/64" | 0.399" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 5/8" | Fully Threaded | __ | Coarse | 9/16" | 15/64" | 0.399" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 3/4" | Fully Threaded | __ | Coarse | 9/16" | 15/64" | 0.399" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 1" | Fully Threaded | __ | Coarse | 9/16" | 15/64" | 0.399" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 1 1/4" | Fully Threaded | __ | Coarse | 9/16" | 15/64" | 0.399" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 1 1/4" | Fully Threaded | 1" | Coarse | 9/16" | 15/64" | 0.399" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 1 1/2" | Partially Threaded | 1" | Coarse | 9/16" | 15/64" | 0.399" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 2" | Partially Threaded | 1" | Coarse | 9/16" | 15/64" | 0.399" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 00000 |
1/2"-13 | ||||||||||||
| 1/2" | Fully Threaded | __ | Coarse | 3/4" | 5/16" | 0.534" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 3/4" | Fully Threaded | __ | Coarse | 3/4" | 5/16" | 0.534" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 00000 |
| 1" | Fully Threaded | __ | Coarse | 3/4" | 5/16" | 0.534" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 1 1/4" | Fully Threaded | __ | Coarse | 3/4" | 5/16" | 0.534" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 1 1/2" | Fully Threaded | 1 1/4" | Coarse | 3/4" | 5/16" | 0.534" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 00000 |
| 2" | Partially Threaded | 1 1/4" | Coarse | 3/4" | 5/16" | 0.534" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 00000 |
| 2 1/2" | Partially Threaded | 1 1/4" | Coarse | 3/4" | 5/16" | 0.534" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 00000 |
| 3" | Partially Threaded | 1 1/4" | Coarse | 3/4" | 5/16" | 0.534" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 00000 |
| 3 1/2" | Partially Threaded | 1 1/4" | Coarse | 3/4" | 5/16" | 0.534" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 00000 |
5/8"-11 | ||||||||||||
| 3/4" | Fully Threaded | __ | Coarse | 15/16" | 25/64" | 0.655" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 1" | Fully Threaded | __ | Coarse | 15/16" | 25/64" | 0.655" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 1 1/2" | Fully Threaded | __ | Coarse | 15/16" | 25/64" | 0.655" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 2" | Fully Threaded | __ | Coarse | 15/16" | 25/64" | 0.655" | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
M4 × 0.7 mm | ||||||||||||
| 10mm | Fully Threaded | __ | Coarse | 7mm | 2.8mm | 4.546mm | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 12mm | Fully Threaded | __ | Coarse | 7mm | 2.8mm | 4.546mm | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
M5 × 0.8 mm | ||||||||||||
| 10mm | Fully Threaded | __ | Coarse | 8mm | 3.5mm | 5.562mm | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 12mm | Fully Threaded | __ | Coarse | 8mm | 3.5mm | 5.562mm | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 18mm | Fully Threaded | __ | Coarse | 8mm | 3.5mm | 5.562mm | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
M6 × 1 mm | ||||||||||||
| 12mm | Fully Threaded | __ | Coarse | 10mm | 4mm | 6.655mm | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 16mm | Fully Threaded | __ | Coarse | 10mm | 4mm | 6.655mm | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 18mm | Fully Threaded | __ | Coarse | 10mm | 4mm | 6.655mm | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 20mm | Fully Threaded | __ | Coarse | 10mm | 4mm | 6.655mm | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 25mm | Fully Threaded | __ | Coarse | 10mm | 4mm | 6.655mm | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
M8 × 1.25 mm | ||||||||||||
| 20mm | Fully Threaded | __ | Coarse | 13mm | 5.3mm | 9.041mm | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 25mm | Fully Threaded | __ | Coarse | 13mm | 5.3mm | 9.041mm | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 30mm | Fully Threaded | __ | Coarse | 13mm | 5.3mm | 9.041mm | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
| 35mm | Partially Threaded | 22mm | Coarse | 13mm | 5.3mm | 9.041mm | 20,000 | Silicone Rubber | -80° to 400° | 80,000 | 000000000 | 0000 |
Sanitary Hex Head Screws
Bolt down equipment in food processing or sanitary areas while sealing out contaminants. Certified by EHEDG (European Hygienic Engineering and Design Group) to meet sanitary design standards, these screws have a nitrile rubber seal underneath the head to keep liquid and debris off the threads and prevent an unsanitary metal-to-metal connection. The seal is also FDA compliant, so it’s safe for direct contact with food.
Made from 316 stainless steel, these screws won’t corrode from frequent washdowns with water or harsh cleaners. They have self-draining surfaces, which means there are no horizontal ledges, so liquid and debris will drain off completely. The smooth, polished sides and rounded edges have no pits or crevices where bacteria could grow.
For technical drawings and 3-D models, click on a part number.
Head | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Threading | Thread Spacing | Wd. | Ht. | Flange Diameter | Temperature Range, ° F | Tensile Strength, psi | Performance Properties | Specifications Met | Each | |
316 Stainless Steel | |||||||||||
1/4"-20 | |||||||||||
| 1/2" | Fully Threaded | Coarse | 7/16" | 21/64" | 37/64" | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 000000 |
| 3/4" | Fully Threaded | Coarse | 7/16" | 21/64" | 37/64" | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 00000 |
| 1" | Fully Threaded | Coarse | 7/16" | 21/64" | 37/64" | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 00000 |
| 1 1/4" | Fully Threaded | Coarse | 7/16" | 21/64" | 37/64" | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 00000 |
| 1 1/2" | Fully Threaded | Coarse | 7/16" | 21/64" | 37/64" | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 00000 |
5/16"-18 | |||||||||||
| 3/4" | Fully Threaded | Coarse | 1/2" | 25/64" | 11/16" | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 00000 |
| 1" | Fully Threaded | Coarse | 1/2" | 25/64" | 11/16" | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 00000 |
| 1 1/4" | Fully Threaded | Coarse | 1/2" | 25/64" | 11/16" | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 00000 |
| 1 1/2" | Fully Threaded | Coarse | 1/2" | 25/64" | 11/16" | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 00000 |
3/8"-16 | |||||||||||
| 3/4" | Fully Threaded | Coarse | 9/16" | 15/32" | 25/32" | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 00000 |
| 1" | Fully Threaded | Coarse | 9/16" | 15/32" | 25/32" | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 00000 |
| 1 1/4" | Fully Threaded | Coarse | 9/16" | 15/32" | 25/32" | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 00000 |
| 1 1/2" | Fully Threaded | Coarse | 9/16" | 15/32" | 25/32" | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 00000 |
1/2"-13 | |||||||||||
| 1" | Fully Threaded | Coarse | 3/4" | 35/64" | 1 1/16" | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 00000 |
| 1 1/4" | Fully Threaded | Coarse | 3/4" | 35/64" | 1 1/16" | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 00000 |
| 1 1/2" | Fully Threaded | Coarse | 3/4" | 35/64" | 1 1/16" | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 00000 |
| 1 3/4" | Fully Threaded | Coarse | 3/4" | 35/64" | 1 1/16" | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 00000 |
| 2" | Fully Threaded | Coarse | 3/4" | 35/64" | 1 1/16" | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 00000 |
M6 × 1mm | |||||||||||
| 12mm | Fully Threaded | Coarse | 10mm | 8mm | 12.8mm | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 0000 |
| 16mm | Fully Threaded | Coarse | 10mm | 8mm | 12.8mm | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 0000 |
| 20mm | Fully Threaded | Coarse | 10mm | 8mm | 12.8mm | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 0000 |
| 25mm | Fully Threaded | Coarse | 10mm | 8mm | 12.8mm | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 0000 |
M8 × 1.25mm | |||||||||||
| 16mm | Fully Threaded | Coarse | 13mm | 10mm | 17.3mm | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 00000 |
| 20mm | Fully Threaded | Coarse | 13mm | 10mm | 17.3mm | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 00000 |
| 25mm | Fully Threaded | Coarse | 13mm | 10mm | 17.3mm | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 00000 |
| 30mm | Fully Threaded | Coarse | 13mm | 10mm | 17.3mm | -75° to 390° | 70,000 | Metal Detectable, X-Ray Detectable | EHEDG Certified, FDA Compliant 21 CFR 177.2600 | 000000000 | 00000 |
Steel Drilling Screws with Washer for Metal
These steel screws are available with corrosion resistant finishes. A rubber-bonded washer compresses to form a watertight seal. They save you time and effort by drilling their own holes and fastening in a single operation. Length is measured from under the head.
Zinc-plated steel screws resist corrosion in wet environments.
Corrosion-resistant-coated steel screws are more corrosion resistant than zinc-plated screws.
Drill Tip | Head | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Type | Lg. | Max. Drilling Thick. | Wd. | Ht. | Washer OD | Thread Size | Approximate Threads per Inch | For Use In | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||||||||
No. 8 | ||||||||||||
| 3/4" | No. 2 | 3/16" | 0.098" | 0.25" | 0.242" | 0.5" | __ | 18 | Steel, Sheet Metal | 50 | 000000000 | 00000 |
| 1" | No. 2 | 0.148" | 0.098" | 0.25" | 0.248" | 0.5" | __ | 18 | Steel, Sheet Metal | 25 | 000000000 | 0000 |
| 1 1/2" | No. 2 | 9/64" | 0.098" | 0.25" | 0.242" | 0.5" | __ | 18 | Steel, Sheet Metal | 25 | 000000000 | 0000 |
No. 10 | ||||||||||||
| 3/4" | No. 3 | 1/4" | 0.15" | 0.313" | 0.252" | 0.5" | __ | 16 | Steel, Sheet Metal | 100 | 000000000 | 00000 |
| 1" | No. 3 | 1/4" | 0.15" | 0.313" | 0.252" | 0.5" | __ | 16 | Steel, Sheet Metal | 100 | 000000000 | 00000 |
| 1 1/4" | No. 3 | 7/32" | 0.15" | 0.313" | 0.252" | 0.5" | __ | 16 | Steel, Sheet Metal | 50 | 000000000 | 00000 |
No. 12 | ||||||||||||
| 3/4" | No. 3 | 9/32" | 0.187" | 0.313" | 0.295" | 0.563" | __ | 14 | Steel, Sheet Metal | 100 | 000000000 | 00000 |
| 7/8" | No. 4 | 0.325" | 0.21" | 0.313" | 0.303" | 0.563" | 12-24 | __ | Steel, Sheet Metal | 50 | 000000000 | 00000 |
| 1" | No. 3 | 9/32" | 0.187" | 0.313" | 0.295" | 0.563" | __ | 14 | Steel, Sheet Metal | 100 | 000000000 | 00000 |
| 1 1/4" | No. 3 | 0.254" | 0.187" | 0.313" | 0.303" | 0.563" | __ | 14 | Steel, Sheet Metal | 50 | 000000000 | 00000 |
| 1 1/4" | No. 4 | 0.325" | 0.21" | 0.313" | 0.303" | 0.563" | 12-24 | __ | Steel, Sheet Metal | 10 | 000000000 | 00000 |
| 1 1/4" | No. 5 | 45/64" | 0.5" | 0.313" | 0.295" | 0.563" | 12-24 | __ | Steel, Sheet Metal | 50 | 000000000 | 00000 |
| 1 1/2" | No. 5 | 21/32" | 0.5" | 0.313" | 0.295" | 0.563" | 12-24 | __ | Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 2" | No. 3 | 0.254" | 0.187" | 0.313" | 0.303" | 0.563" | __ | 14 | Steel, Sheet Metal | 50 | 000000000 | 00000 |
| 2" | No. 5 | 21/32" | 0.5" | 0.313" | 0.295" | 0.563" | 12-24 | __ | Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 2 1/2" | No. 3 | 0.254" | 0.187" | 0.313" | 0.303" | 0.563" | __ | 14 | Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 3" | No. 3 | 1/4" | 0.187" | 0.313" | 0.295" | 0.563" | __ | 14 | Steel, Sheet Metal | 10 | 000000000 | 00000 |
1/4" | ||||||||||||
| 3/4" | No. 3 | 5/16" | 0.21" | 0.375" | 0.341" | 0.625" | __ | 14 | Steel, Sheet Metal | 50 | 000000000 | 0000 |
| 1" | No. 3 | 5/16" | 0.21" | 0.375" | 0.341" | 0.625" | __ | 14 | Steel, Sheet Metal | 50 | 000000000 | 00000 |
| 1 1/4" | No. 3 | 5/16" | 0.21" | 0.375" | 0.341" | 0.625" | __ | 14 | Steel, Sheet Metal | 50 | 000000000 | 00000 |
| 1 1/2" | No. 3 | 5/16" | 0.21" | 0.375" | 0.341" | 0.625" | __ | 14 | Steel, Sheet Metal | 50 | 000000000 | 00000 |
| 2" | No. 3 | 5/16" | 0.21" | 0.375" | 0.341" | 0.625" | __ | 14 | Steel, Sheet Metal | 50 | 000000000 | 00000 |
| 2 1/2" | No. 3 | 1/4" | 0.21" | 0.375" | 0.341" | 0.625" | __ | 14 | Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 3" | No. 3 | 5/16" | 0.21" | 0.375" | 0.341" | 0.625" | __ | 14 | Steel, Sheet Metal | 25 | 000000000 | 00000 |
Corrosion-Resistant-Coated Steel | ||||||||||||
No. 10 | ||||||||||||
| 3/4" | No. 3 | 1/4" | 0.15" | 0.313" | 0.305" | 0.5" | __ | 16 | Steel, Sheet Metal | 50 | 000000000 | 00000 |
| 1" | No. 2 | 3/16" | 0.106" | 0.313" | 0.265" | 0.5" | __ | 16 | Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 1 1/2" | No. 3 | 1/4" | 0.15" | 0.313" | 0.252" | 0.5" | __ | 16 | Steel, Sheet Metal | 50 | 000000000 | 00000 |
| 1 1/2" | No. 4 | 19/64" | 0.175" | 0.313" | 0.265" | 0.5" | __ | 16 | Steel, Sheet Metal | 50 | 000000000 | 00000 |
| 2" | No. 3 | 7/32" | 0.15" | 0.313" | 0.28" | 0.5" | __ | 16 | Steel, Sheet Metal | 25 | 000000000 | 00000 |
No. 12 | ||||||||||||
| 3/4" | No. 3 | 9/32" | 0.187" | 0.313" | 0.34" | 0.563" | __ | 14 | Steel, Sheet Metal | 50 | 000000000 | 00000 |
| 7/8" | No. 4 | 9/32" | 0.21" | 0.313" | 0.285" | 0.563" | 12-24 | __ | Steel, Sheet Metal | 50 | 000000000 | 00000 |
| 1" | No. 2 | 1/2" | 0.14" | 0.313" | 0.34" | 0.563" | __ | 14 | Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 1 1/4" | No. 2 | 1/2" | 0.14" | 0.313" | 0.38" | 0.563" | __ | 14 | Steel, Sheet Metal | 50 | 000000000 | 00000 |
| 1 1/4" | No. 4.5 | 1/2" | 0.375" | 0.313" | 0.285" | 0.563" | 12-24 | __ | Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 1 1/4" | No. 5 | 45/64" | 0.5" | 0.313" | 0.285" | 0.563" | 12-24 | __ | Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 1 1/2" | No. 2 | 1/2" | 0.14" | 0.313" | 0.38" | 0.563" | __ | 14 | Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 1 1/2" | No. 3 | 9/32" | 0.187" | 0.313" | 0.295" | 0.563" | __ | 14 | Steel, Sheet Metal | 50 | 000000000 | 00000 |
| 1 1/2" | No. 4.5 | 0.426" | 0.375" | 0.313" | 0.303" | 0.563" | 12-24 | __ | Steel, Sheet Metal | 10 | 000000000 | 00000 |
| 1 1/2" | No. 5 | 45/64" | 0.5" | 0.313" | 0.285" | 0.563" | 12-24 | __ | Steel, Sheet Metal | 10 | 000000000 | 00000 |
| 2" | No. 2 | 1/2" | 0.14" | 0.313" | 0.34" | 0.563" | __ | 14 | Steel, Sheet Metal | 10 | 000000000 | 0000 |
| 2" | No. 5 | 45/64" | 0.5" | 0.313" | 0.285" | 0.563" | 12-24 | __ | Steel, Sheet Metal | 10 | 000000000 | 00000 |
| 2 1/2" | No. 3 | 1/4" | 0.187" | 0.313" | 0.34" | 0.563" | __ | 14 | Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 3" | No. 3 | 9/32" | 0.187" | 0.313" | 0.273" | 0.563" | __ | 14 | Steel, Sheet Metal | 10 | 000000000 | 00000 |
| 3" | No. 5 | 21/32" | 0.5" | 0.313" | 0.305" | 0.563" | 12-24 | __ | Steel, Sheet Metal | 10 | 000000000 | 00000 |
| 4" | No. 3 | 9/32" | 0.21" | 0.313" | 0.255" | 0.563" | __ | 14 | Steel, Sheet Metal | 10 | 000000000 | 0000 |
1/4" | ||||||||||||
| 7/8" | No. 1 | 5/16" | 0.048" | 0.375" | 0.341" | 0.625" | __ | 14 | Steel, Sheet Metal | 10 | 000000000 | 0000 |
| 7/8" | No. 1 | 5/16" | 0.048" | 0.375" | 0.38" | 0.563" | __ | 14 | Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 1" | No. 3 | 5/16" | 0.21" | 0.375" | 0.405" | 0.563" | __ | 14 | Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 1 1/4" | No. 3 | 5/16" | 0.21" | 0.375" | 0.38" | 0.563" | __ | 14 | Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 1 1/2" | No. 3 | 5/16" | 0.21" | 0.375" | 0.405" | 0.563" | __ | 14 | Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 2" | No. 3 | 5/16" | 0.21" | 0.375" | 0.323" | 0.563" | __ | 14 | Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 3" | No. 3 | 5/16" | 0.21" | 0.375" | 0.36" | 0.625" | __ | 14 | Steel, Sheet Metal | 10 | 000000000 | 00000 |
| 4" | No. 3 | 5/16" | 0.21" | 0.375" | 0.36" | 0.625" | __ | 14 | Steel, Sheet Metal | 10 | 000000000 | 00000 |
Steel Drilling Screws with Corrosion-Resistant Head and Washer for Metal
These steel screws have a head encapsulated by chemical-resistant 18-8 stainless steel. A rubber-bonded washer compresses to form a watertight seal. They save you time and effort by drilling their own holes and fastening in a single operation. Length is measured from under the head.
For technical drawings and 3-D models, click on a part number.
Drill Tip | Head | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Type | Lg. | Max. Drilling Thick. | Wd. | Ht. | Washer OD | Thread Size | Approximate Threads per Inch | For Use In | Pkg. Qty. | Pkg. | |
Steel with 18-8 Stainless Steel Head Cap | ||||||||||||
No. 12 | ||||||||||||
| 1" | No. 2 | 1/2" | 0.14" | 0.313" | 0.35" | 0.438" | __ | 14 | Steel, Sheet Metal | 25 | 000000000 | 000000 |
| 1 1/4" | No. 2 | 1/2" | 0.14" | 0.313" | 0.35" | 0.438" | __ | 14 | Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 1 1/2" | No. 2 | 1/2" | 0.14" | 0.313" | 0.35" | 0.438" | __ | 14 | Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 2" | No. 5 | 45/64" | 0.5" | 0.313" | 0.35" | 0.438" | 12-24 | __ | Steel, Sheet Metal | 10 | 000000000 | 00000 |
1/4" | ||||||||||||
| 7/8" | No. 1 | 5/16" | 0.048" | 0.313" | 0.35" | 0.438" | __ | 14 | Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 1 1/8" | No. 1 | 5/16" | 0.048" | 0.313" | 0.35" | 0.438" | __ | 14 | Steel, Sheet Metal | 25 | 000000000 | 00000 |
Stainless Steel Drilling Screws with Washer for Metal
Made from 410 stainless steel, these screws are strong, wear resistant, and mildly chemical resistant. A rubber-bonded washer compresses to form a watertight seal. They save you time and effort by drilling their own holes and fastening in a single operation. Length is measured from under the head.
For technical drawings and 3-D models, click on a part number.
Drill Tip | Head | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Type | Lg. | Max. Drilling Thick. | Wd. | Ht. | Washer OD | Thread Size | Approximate Threads per Inch | For Use In | Pkg. Qty. | Pkg. | |
Zinc-Plated 410 Stainless Steel | ||||||||||||
No. 8 | ||||||||||||
| 1/2" | No. 2 | 3/16" | 0.098" | 0.25" | 0.211" | 0.5" | __ | 18 | Stainless Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 3/4" | No. 2 | 3/16" | 0.098" | 0.25" | 0.211" | 0.5" | __ | 18 | Stainless Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 1" | No. 2 | 3/16" | 0.098" | 0.25" | 0.29" | 0.5" | __ | 18 | Stainless Steel, Sheet Metal | 25 | 000000000 | 0000 |
| 1 1/4" | No. 2 | 3/16" | 0.098" | 0.25" | 0.29" | 0.5" | __ | 18 | Stainless Steel, Sheet Metal | 25 | 000000000 | 00000 |
No. 10 | ||||||||||||
| 5/8" | No. 3 | 1/4" | 0.15" | 0.313" | 0.221" | 0.5" | __ | 16 | Stainless Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 3/4" | No. 3 | 1/4" | 0.15" | 0.313" | 0.221" | 0.5" | __ | 16 | Stainless Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 1" | No. 3 | 1/4" | 0.15" | 0.313" | 0.221" | 0.5" | __ | 16 | Stainless Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 1 1/4" | No. 3 | 1/4" | 0.15" | 0.313" | 0.3" | 0.5" | __ | 16 | Stainless Steel, Sheet Metal | 25 | 000000000 | 0000 |
| 1 1/2" | No. 3 | 1/4" | 0.15" | 0.313" | 0.3" | 0.5" | __ | 16 | Stainless Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 2" | No. 3 | 1/4" | 0.15" | 0.313" | 0.3" | 0.5" | __ | 16 | Stainless Steel, Sheet Metal | 25 | 000000000 | 00000 |
No. 12 | ||||||||||||
| 3/4" | No. 3 | 9/32" | 0.187" | 0.313" | 0.256" | 0.563" | __ | 14 | Stainless Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 1" | No. 3 | 9/32" | 0.187" | 0.313" | 0.256" | 0.563" | __ | 14 | Stainless Steel, Sheet Metal | 25 | 000000000 | 00000 |
| 1 1/4" | No. 3 | 9/32" | 0.187" | 0.313" | 0.256" | 0.563" | __ | 14 | Stainless Steel, Sheet Metal | 10 | 000000000 | 0000 |
| 1 1/4" | No. 4 | 9/32" | 0.21" | 0.313" | 0.32" | 0.563" | 12-24 | __ | Stainless Steel, Sheet Metal | 10 | 000000000 | 0000 |
| 1 1/4" | No. 5 | 45/64" | 0.5" | 0.313" | 0.256" | 0.563" | 12-24 | __ | Stainless Steel, Sheet Metal | 10 | 000000000 | 00000 |
| 1 1/2" | No. 3 | 9/32" | 0.187" | 0.313" | 0.256" | 0.563" | __ | 14 | Stainless Steel, Sheet Metal | 10 | 000000000 | 0000 |
| 2" | No. 3 | 9/32" | 0.187" | 0.313" | 0.32" | 0.563" | __ | 14 | Stainless Steel, Sheet Metal | 10 | 000000000 | 0000 |
| 2" | No. 5 | 45/64" | 0.5" | 0.313" | 0.32" | 0.563" | 12-24 | __ | Stainless Steel, Sheet Metal | 5 | 000000000 | 0000 |
| 2 1/2" | No. 3 | 9/32" | 0.187" | 0.313" | 0.32" | 0.563" | __ | 14 | Stainless Steel, Sheet Metal | 10 | 000000000 | 0000 |
| 3" | No. 3 | 9/32" | 0.187" | 0.313" | 0.32" | 0.563" | __ | 14 | Stainless Steel, Sheet Metal | 10 | 000000000 | 00000 |
1/4" | ||||||||||||
| 3/4" | No. 3 | 5/16" | 0.21" | 0.375" | 0.291" | 0.625" | __ | 14 | Stainless Steel, Sheet Metal | 10 | 000000000 | 0000 |
| 7/8" | No. 1 | 5/16" | 0.048" | 0.375" | 0.291" | 0.625" | __ | 14 | Stainless Steel, Sheet Metal | 10 | 000000000 | 00000 |
| 1" | No. 3 | 5/16" | 0.21" | 0.375" | 0.291" | 0.625" | __ | 14 | Stainless Steel, Sheet Metal | 10 | 000000000 | 0000 |
| 1 1/4" | No. 3 | 5/16" | 0.21" | 0.375" | 0.291" | 0.625" | __ | 14 | Stainless Steel, Sheet Metal | 10 | 000000000 | 0000 |
| 1 1/2" | No. 3 | 5/16" | 0.21" | 0.375" | 0.291" | 0.625" | __ | 14 | Stainless Steel, Sheet Metal | 10 | 000000000 | 00000 |
| 2" | No. 3 | 5/16" | 0.21" | 0.375" | 0.291" | 0.625" | __ | 14 | Stainless Steel, Sheet Metal | 10 | 000000000 | 00000 |
| 2 1/2" | No. 3 | 5/16" | 0.21" | 0.375" | 0.291" | 0.625" | __ | 14 | Stainless Steel, Sheet Metal | 10 | 000000000 | 00000 |
| 3" | No. 3 | 5/16" | 0.21" | 0.375" | 0.291" | 0.625" | __ | 14 | Stainless Steel, Sheet Metal | 10 | 000000000 | 00000 |
| 4" | No. 3 | 5/16" | 0.21" | 0.375" | 0.355" | 0.625" | __ | 14 | Stainless Steel, Sheet Metal | 5 | 000000000 | 0000 |
Stainless Steel Vibration-Damping Hex Head Screws for Sheet Metal
Made from 18-8 stainless steel, these screws are chemical resistant and may be mildly magnetic. A rubber washer cushions the screw to resist loosening from vibration. They have a hex head for a secure grip with a wrench and a flange to reduce the risk of crushing thin metal. Screws penetrate 0.025" and thinner sheet metal. Length is measured from under the washer.
For technical drawings and 3-D models, click on a part number.
Head | Washer | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | OD | Thick. | Drill Bit Size | Approximate Threads per Inch | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||
No. 14 | |||||||||
| 3/4" | 0.375" | 0.181" | 0.625" | 0.101" | 5.5 mm | 10 | 10 | 000000000 | 000000 |
| 1" | 0.375" | 0.181" | 0.625" | 0.101" | 5.5 mm | 10 | 10 | 000000000 | 00000 |
| 1 1/2" | 0.375" | 0.181" | 0.625" | 0.101" | 5.5 mm | 10 | 10 | 000000000 | 00000 |
| 2" | 0.375" | 0.181" | 0.625" | 0.101" | 5.5 mm | 10 | 10 | 000000000 | 00000 |
| 2 1/2" | 0.375" | 0.181" | 0.625" | 0.101" | 5.5 mm | 10 | 5 | 000000000 | 00000 |
| 3" | 0.375" | 0.181" | 0.625" | 0.101" | 5.5 mm | 10 | 5 | 000000000 | 00000 |
| 4" | 0.375" | 0.181" | 0.625" | 0.101" | 5.5 mm | 10 | 1 | 000000000 | 0000 |
No. 17 | |||||||||
| 3/4" | 0.375" | 0.181" | 0.625" | 0.101" | 1/4" | 10 | 10 | 000000000 | 00000 |
| 1" | 0.375" | 0.181" | 0.625" | 0.101" | 1/4" | 10 | 10 | 000000000 | 00000 |
Steel Vibration-Damping Hex Head Screws for Sheet Metal
These steel screws are zinc plated to resist corrosion in wet environments. A rubber washer cushions the screw to resist loosening from vibration. They have a hex head for a secure grip with a wrench and a flange to reduce the risk of crushing thin metal. Screws penetrate 0.025" and thinner sheet metal. Length is measured from under the washer.
For technical drawings and 3-D models, click on a part number.
Head | Washer | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | OD | Thick. | Drill Bit Size | Approximate Threads per Inch | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | |||||||||
No. 14 | |||||||||
| 5/8" | 0.375" | 0.181" | 5/8" | 0.101" | 5.5 mm | 10 | 25 | 000000000 | 00000 |
| 3/4" | 0.375" | 0.181" | 5/8" | 0.101" | 5.5 mm | 10 | 50 | 000000000 | 00000 |
| 1" | 0.375" | 0.181" | 5/8" | 0.101" | 5.5 mm | 10 | 50 | 000000000 | 00000 |
| 1 1/4" | 0.375" | 0.181" | 5/8" | 0.101" | 5.5 mm | 10 | 50 | 000000000 | 00000 |
| 1 1/2" | 0.375" | 0.181" | 5/8" | 0.101" | 5.5 mm | 10 | 50 | 000000000 | 00000 |
| 2" | 0.375" | 0.181" | 5/8" | 0.101" | 5.5 mm | 10 | 25 | 000000000 | 00000 |
| 2 1/2" | 0.375" | 0.181" | 5/8" | 0.101" | 5.5 mm | 10 | 25 | 000000000 | 00000 |
| 3" | 0.375" | 0.181" | 5/8" | 0.101" | 5.5 mm | 10 | 25 | 000000000 | 00000 |
| 4" | 0.375" | 0.181" | 5/8" | 0.101" | 5.5 mm | 10 | 10 | 000000000 | 00000 |
| 5" | 0.375" | 0.181" | 5/8" | 0.101" | 5.5 mm | 10 | 5 | 000000000 | 00000 |
No. 17 | |||||||||
| 3/4" | 0.375" | 0.181" | 5/8" | 0.101" | 1/4" | 10 | 25 | 000000000 | 00000 |
| 1" | 0.375" | 0.181" | 5/8" | 0.101" | 1/4" | 10 | 25 | 000000000 | 00000 |
Screws for Joining Sheet Metal to Wood
Able to penetrate overlapping sheets, these screws have a secure hold in wood. The hex head allows for a firm grip with a wrench, while a rubber washer provides a watertight seal. They're corrosion-resistant-coated steel to resist corrosion in wet environments and minimize reactions between dissimilar metals. Length is measured from under the washer.
For technical drawings and 3-D models, click on a part number.
Head | ||||||||
|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | Washer OD | Drill Bit Size | Approximate Threads per Inch | Pkg. Qty. | Pkg. | |
Corrosion-Resistant-Coated Steel | ||||||||
No. 9 | ||||||||
| 1" | 0.25" | 0.16" | 0.472" | __ | 15 | 100 | 000000000 | 000000 |
| 1 1/2" | 0.25" | 0.16" | 0.472" | __ | 15 | 50 | 000000000 | 0000 |
| 2" | 0.25" | 0.16" | 0.472" | __ | 15 | 50 | 000000000 | 0000 |
| 2 1/2" | 0.25" | 0.16" | 0.472" | __ | 15 | 50 | 000000000 | 00000 |
| 3" | 0.25" | 0.16" | 0.472" | __ | 15 | 25 | 000000000 | 0000 |
No. 10 | ||||||||
| 1" | 0.25" | 0.169" | 0.45" | No. 21 | 16 | 100 | 000000000 | 00000 |
| 2 1/2" | 0.25" | 0.169" | 0.45" | No. 21 | 12 | 50 | 000000000 | 00000 |
| 3" | 0.25" | 0.169" | 0.45" | No. 21 | 12 | 50 | 000000000 | 00000 |
No. 14 | ||||||||
| 1 1/2" | 0.313" | 0.15" | 0.593" | __ | 10 | 25 | 000000000 | 0000 |