These switches are protected from corrosion, high-temperature and high-pressure washdowns, and oil/coolant spraying. Install them in 22 mm dia. cutouts.

Rated NEMA 4, 13, and IP66, these metal switches are protected from washdowns and oil/coolant spraying. Install them in 30 mm dia. cutouts.

Install in 16 mm dia. cutouts.

Choose an actuator and contact block to make your own 22 mm metal switch.

Choose an actuator and contact block to make your own 22 mm plastic switch.

Install these key switches in 3/4" dia. panel cutouts. They require a key to turn circuits on or off, limiting access to sensitive equipment.

Rated NEMA 4, these switches are protected from washdowns.

Install these key switches in 30 mm dia. panel cutouts. They require a key to turn circuits on or off, limiting access to sensitive equipment.

Maximize space in a panel with these miniature switches.

Turn these switches by hand.

Choose from a variety of messages and colored lenses to combine a rocker with a base and wiring socket for a complete switch.

Rated IP67, these switches are protected from temporary submersion.

Able to withstand high currents, these switches are often used with motors and pumps.

The built-in contact block in these switches extends behind the panel half the depth of most other 22 mm switches, saving valuable space.

A single-piece construction prevents the contact block from separating from the actuator in high-vibration applications.

More durable than standard metal switches, these can handle tough, repetitive use.

The face of these switches mounts flush against a panel, so they're easy to clean and hard to damage.

Use these switches where ignitable gas and dust may be present. Their contact blocks are UL listed for Class I, Division 2, Groups B, C, and D hazardous locations.

Immediately cut power with a single push.

Operate low-voltage devices that require less than 48 volts, such as doorbells and buzzers.

Sized for 4 mm or 6 mm panel cutouts, these switches are often used with circuit boards to control electronics.

Install in 14 mm dia. cutouts.

Because these switches mount flush against a panel, they're easy to clean and hard to damage.

Rated NEMA 3S, NEMA 4X, NEMA 13, and IP66, these plastic switches resist corrosion better than aluminum switches and withstand washdowns and oil/coolant spraying.

These aluminum switches are rated NEMA 4, NEMA 13, and IP66 for protection from washdowns and oil/coolant spraying.

With a stainless steel enclosure, these switches are more durable than aluminum and plastic. They're rated NEMA 4X for protection from corrosion and washdowns.

These familiar push-button switches mount to flat surfaces.

Immediately cut power with a single push.

Control cranes and other mobile machinery in dirty, outdoor, and wet environments without damaging your switch.

Use these hand-held switches with mobile machinery.

Operate equipment from up to 330 feet away—these switches include a transmitter and a receiver that connects to equipment.

Combine a push-button actuator with a switching mechanism to build a complete switch.

More precise than analog potentiometers, these have a three-digit display that is easy to read.