McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    38 Products

    Magnetic Male Round Standoffs

    Image of Product. Front orientation. Standoffs. Magnetic Male Round Standoffs.
    Image of Product. Front orientation. Standoffs. Magnetic Male Round Standoffs.
    Mount or reposition internally-threaded parts instantly—these magnetic-backed standoffs snap onto metal surfaces. Install on displays, test rigs, and tight spaces where permanent mounting isn't practical.
    Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.
    Rubber-Coated Stainless Steel—Reduce corrosion and prevent slipping. These standoffs withstand exposure to saltwater and chemicals, but are not as strong as steel.
    Alnico Magnet—Retain their magnetic strength, even when exposed to high temperatures.
    Neodymium Magnet—Our strongest magnets. These support heavy connections, but have lower heat resistance than Alnico magnets.
    Lg.,
    mm
    OD,
    mm
    Thread
    Lg., mm
    Max. Pull,
    lbf
    Magnet
    Material
    Max. Temp.,
    ° F
    Each
    Zinc-Plated Steel
     
    0.7 mm Thread Pitch, M4 Threads
    201081.9Alnico84093527A106000000
    201085.3Neodymium17593527A1120000
    201382.6Alnico84093527A10700000
    2013813Neodymium17593527A1130000
    2016104.4Alnico84093527A10800000
    20161020Neodymium17593527A11400000
     
    M6 Threads, 1 mm Thread Pitch
    2520108.9Alnico84093527A10900000
    25201030Neodymium17593527A11500000
     
    M3 Threads, 0.5 mm Thread Pitch
    20670.4Alnico84093527A10400000
    20671.3Neodymium17593527A1100000
    20870.8Alnico84093527A10500000
    20872.6Neodymium17593527A1110000
     
    Rubber-Coated Stainless Steel
     
    0.7 mm Thread Pitch, M4 Threads
    141062.1Neodymium17593527A10100000
     
    M6 Threads, 1 mm Thread Pitch
    1613103.3Neodymium17593527A10200000
     
    1.5 mm Thread Pitch, M10 Threads
    20201410Neodymium17593527A10300000
     

    Magnetic Female Round Standoffs

    Image of Product. Front orientation. Standoffs. Magnetic Female Round Standoffs.
    Image of Product. Front orientation. Standoffs. Magnetic Female Round Standoffs.
    Image of Attribute. Partially Threaded. Front orientation. Contains Annotated. Standoffs. Magnetic Female Round Standoffs.

    Partially

    Threaded

    Mount or reposition male-threaded parts instantly—these magnetic-backed standoffs snap onto metal surfaces. Install on displays, test rigs, and tight spaces where permanent mounting isn't practical.
    Zinc-Plated Steel—A common choice for areas with occasional exposure to moisture.
    Brass—Resist corrosion in wet environments. Brass is softer and less likely to dent surfaces than steel. Don't mount brass standoffs directly to steel, or they'll create a short circuit that reduces magnetism up to 15%.
    Alnico Magnet—Retain their magnetic strength, even when exposed to high temperatures.
    Neodymium Magnet—Our strongest magnets. These support heavy connections, but have lower heat resistance than Alnico magnets.
    Lg.,
    mm
    OD,
    mm
    Threading
    Min. Thread
    Lg., mm
    Max. Pull,
    lbf
    Magnet
    Material
    Min. Mounting Distance
    from Steel, mm
    Max. Temp.,
    ° F
    Each
    Zinc-Plated Steel
     
    M3 Threads, 0.5 mm Thread Pitch
    206Partially Threaded50.4Alnico—84093546A101000000
    206Partially Threaded51.3Neodymium—17593546A1070000
    208Partially Threaded50.8Alnico—84093546A10200000
    208Partially Threaded52.6Neodymium—17593546A1080000
     
    0.7 mm Thread Pitch, M4 Threads
    2010Partially Threaded71.9Alnico—84093546A10300000
    2010Partially Threaded75.3Neodymium—17593546A1090000
    2013Partially Threaded72.6Alnico—84093546A10400000
    2013Partially Threaded713Neodymium—17593546A1100000
    2016Partially Threaded54.4Alnico—84093546A10500000
    2016Partially Threaded520Neodymium—17593546A1110000
     
    M6 Threads, 1 mm Thread Pitch
    2520Partially Threaded78.9Alnico—84093546A10600000
    2520Partially Threaded730Neodymium—17593546A11200000
     
    Brass
     
    M3 Threads, 0.5 mm Thread Pitch
    206Partially Threaded52.2Neodymium1.517593546A1130000
    208Partially Threaded55.6Neodymium1.517593546A1140000
     
    0.7 mm Thread Pitch, M4 Threads
    2010Partially Threaded710Neodymium217593546A11500000
    2013Partially Threaded715Neodymium2.517593546A11600000
    2516Partially Threaded833Neodymium317593546A11700000
     
    M6 Threads, 1 mm Thread Pitch
    2520Partially Threaded662Neodymium417593546A11800000
     

    Magnetic-Back Bumpers

    A magnetic base makes it easy to attach, move, and replace these bumpers on metal table legs, panels, and other surfaces. They stay put when bumped, but they're not as secure as bumpers attached with fasteners. With a steel washer for added strength, they absorb repeated impacts without wearing down.
    Multipurpose SBR RubberAbout Multipurpose SBR Rubber
    Image of Product. Front orientation. Bumpers. Magnetic.
    These bumpers absorb impact well enough for most applications. However, they're not for use outdoors and break down when exposed to oil and harsh chemicals.
    Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.
    OD
    Ht.
    Hardness
    Hardness
    Rating
    Color
    Temp.,
    ° F
    Washer
    Material
    Nonmarking
    For Use
    Outdoors
    Each
    1/2"3/8"Durometer 70AHardBlack0 to 180SteelNoNo2791N1100000
    5/8"3/8"Durometer 70AHardBlack0 to 180SteelNoNo2791N120000
    3/4"1/2"Durometer 70AHardBlack0 to 180SteelNoNo2791N130000
    7/8"5/8"Durometer 70AHardBlack0 to 180SteelNoNo2791N140000
    1 1/32"3/4"Durometer 70AHardBlack0 to 180SteelNoNo2791N1500000
     
    back to top