Also known as test indicators, these have a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. They have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles. Use the included dovetail-to-stem attachment to convert the indicator to a stem mount.

Inch/metric indicators have both measurements on the dial face for quick conversions.

Also known as test indicators, these have a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. They have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles. Use the included dovetail-to-stem and height gauge/tool post attachments with the swivel clamp to mount the indicator.

Inch/metric indicators are a good choice when you need to convert readings quickly. Those with an inch/metric dial face have imperial measurements on the outer ring and metric on the inner. Those with a metric/inch dial face have metric measurements on the outer ring and imperial on the inner.

Measure larger ranges than with our other lever-style indicators. Also known as test indicators, these have a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. Rotate the dial face for viewing at multiple angles. Bearings are jeweled for high sensitivity, wear resistance, and a long service life. A revolution counter helps you keep track of dial revolutions.

Mounting stem adapters (sold separately) increase the diameter of your indicator mounting stem from 5/32" to 3/8" so it can be mounted to holders that fit 3/8" diameter stems.

For technical drawings and 3-D models, click on a part number.

Also known as test indicators, these have a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. They have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles. Use the included attachments with the swivel clamp to mount the indicator in the setup of your choice.

For technical drawings and 3-D models, click on a part number.

Also known as test indicators, these have a lever-style contact point that pivots as it comes into contact with a surface and a balanced dial with positive values on one side and negative values on the other side. They have highly sensitive, wear-resistant jeweled bearings for a long service life. Rotate the dial face for viewing at multiple angles.

For technical drawings and 3-D models, click on a part number.

Also known as test indicators, these have a lever-style contact point that pivots as it comes into contact with a surface. Rotate the dial face for viewing at multiple angles. They have selectable measurement increments and can be displayed as digits or in a bar graph. Transmit measurement data to any Bluetooth-enabled device without being tethered by a cable. These indicators are rated IP65 for protection against dust and spraying water or coolant.

Securely mount indicators to metal surfaces with the magnetic base on these holders. They have a switch that releases the magnet for easy setups.

Holders with a fine-adjustment arm have a knob on the arm that lets you precisely adjust the arm’s angle or move the indicator up and down.

Holders with a V-grooved base can be mounted on flat or curved metal surfaces.

For technical drawings and 3-D models, click on a part number.

Adjust the flexible arm to nearly any position. These holders have a ball-and-socket segmented arm that locks in place with a lever. The magnetic base has a release switch for easy setups.

Holders with V-grooved base can be mounted on both curved and flat surfaces.

Holders with fine-adjustment base or clamp give you more precise control over positioning.

Position the arm by adjusting joints at the top, middle, and bottom. The magnetic base has a V-grooved bottom for mounting on curved and flat metal surfaces and a magnetic-release switch for easy setups. Holders have fine-adjustment knobs for precise positioning.

Position the arm by adjusting joints at the top and middle. Use the fine adjustment knob for precise positioning.

Holders with a V-grooved base can be mounted on both curved and flat metal surfaces. They have an additional joint at the bottom.

Adjust the flexible ball-and-socket segmented arm to nearly any position and lock in place. A heavy base adds stability.

Holders with a granite base have an extremely tight flatness tolerance. Their flatness gives you an accurate reference for inspection work and lets you move workpieces in and out smoothly. These holders have a fine-adjustment clamp to position indicators at precise angles.

Stabilize and precisely position your indicator with these weighted bases. Attached to the base, these holders have a jointed arm for moving your indicator up and down and in and out. Tighten the knob on the arm to lock it in place and use the fine-adjustment clamp for angling your indicator just right. Made of granite, the base has an extremely tight flatness tolerance, so it creates an accurate reference point for inspection work. It also means you can easily slide your workpiece in and out.

Position the arm by adjusting joints at the top, middle, and bottom. A vacuum base provides stability on granite plates and other nonmagnetic surfaces. Use the fine-adjustment knob on the clamp for precise positioning

For technical drawings and 3-D models, click on a part number.