For even wear across the sanding belt, these sanders move the belt up and down as it rotates. This dual motion reduces clogs, prevents overheating, and makes the belt last longer. The backing plate behind the belt has a graphite coating to reduce heat further. Position these sanders at the angle you need to best access your workpiece. Set the belt flat to sand long, flat surfaces or at a 90° angle to sand edges. It can also be tilted to any angle in between for beveling. To finish contoured surfaces, press your material against the outer drum.

These sanders have adjustable belt tracking, which lets you maintain proper belt tension. For quick belt changes, there’s a belt-release lever. If you want to connect them to a dust collector or vacuum system, they have a dust extraction port. Use with sanding belts (sold separately).

The most versatile sanders we offer—you can set them up in four different ways to sand flat edges, curved surfaces, inner radii, and more. Threaded handles lock and unlock each configuration and tilt the worktable, so it takes less than a minute to switch between setups and doesn’t require tools. Use either the flat platen or contact wheel to position your sanding belt both vertically and horizontally.

Use the flat platen when you need to sand flat surfaces, bevel edges, or debur something. When you use it in the horizontal position, it will give you a longer section of sanding belt to work with. To sand curved surfaces, such as tubing or pipe, you can remove the platen to loosen the belt so it wraps around your workpiece.

Use the contact wheel to quickly remove a lot of material. It moves at high speeds, but makes less contact with your sanding belt than the flat platen, so it won’t overheat and burn or discolor your workpiece. The small wheel attachment aligns horizontally to configure your belt into a spindle sander. The tight curve on the spindle is great for sanding corners, inner radii, and tricky shapes.

These sanders have a variable speed motor, so you can adjust them to suit everything from coarse sanding to fine finishing. These sanders and their attachments meet OSHA safety standards for machine guards.

They’re small enough that you can use them on your benchtop. Or add a stand (sold separately). You can adjust the stand height in 1" increments and store attachments on the tool arm slots.