We will reply to your message within an hour.
More
Spring tension pulls the door closed when it’s open less than 10° and keeps it closed without a catch or latch.
These hinges have a standard range of motion of 100° to 120°.
Eliminate slamming doors—push the door and these hinges slowly pull it closed.
With a 170° range of motion, these hinges are for doors that need to open wide.
Easier to install than other mortise-mount concealed cabinet hinges, these fit in two drilled holes.
Hinge leaves fit into two cutouts (mortises) to mount flush with door and frame edges.
Easier to install than other concealed cabinet hinges, these do not require a cutout.
When the cabinet door is closed, a portion of the frame leaf is exposed and the entire door leaf is hidden
Surface-mount these hinges to the side of a cabinet.
Slip the hinge pins into 11/32" Dia. × 5/16" Dp. holes in a cabinet.
Mount the hinge leaves to the surface of the door and the frame. These hinges are easy to install because they don't require cutouts (mortises).
Hinge leaves fit into two cutouts (mortises) to mount flush with the door and frame.
Open doors past their frame to make extra room for people and large items, such as carts, furniture, and wheelchairs, to pass through.
Thick leaves and a large diameter pin make these hinges good for use with heavy doors.
Turn a set screw to adjust the door 1/8" up or down after it's hung.
These hinges are made of metal.
The hinge pin is attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin.
Also known as bullet hinges, these hinges are the right size for tight spaces and narrow frames.
A grease fitting makes these hinges easy to lubricate.
These hinges with holes are spring loaded—pull the handle to retract the pin and disconnect a door; release the handle and the pin snaps back.
These hinges without holes are spring loaded—pull the handle to retract the pin and disconnect a door; release the handle and the pin snaps back.
To make reconnecting doors easier than other pull release quick disconnect hinges, these have a keeper that holds the pin in a retracted position.
A keeper holds the pin in a retracted position to make reconnecting doors easier than other pull-release quick-disconnect hinges.
To retract the pin and disconnect a door, squeeze the hinge handles together. Release the handles and the pin snaps back.
Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.
These hinges allow 360° of motion.
Springs in these hinges with holes automatically swing doors and gates closed behind you.
Springs in these hinges without holes automatically swing doors and gates closed behind you.
The springs in these hinges swing doors and gates fully open after a light push on the door.
After a light push on the door, springs in these hinges swing doors and gates fully open.
Use these hinges on lightweight screen and storm doors as well as small gates.
A stop keeps these hinges open at a set angle; push past the stop to open them to 180°.
These hinges are completely hidden when the door is closed.
The mounting hole pattern does not follow an industry standard, which means you can work around worn mounting holes when replacing template hinges.
Bearings allow these hinges to open and close doors smoothly. The mounting holes form an industry-standard half-moon shape.
The mounting holes on these hinges form an industry-standard half-moon shape.
No need for oil or grease, these hinges are maintenance free. The mounting holes form an industry-standard half-moon shape.
A stud projects from the back of each hinge leaf to prevent the door from being forced open. The mounting holes form an industry-standard half-moon shape.
Only one cutout (mortise) is needed to mount these hinges—the offset design allows surface mounting the door leaf and mortise mounting the frame leaf.
Bearings allow these hinges to open and close doors smoothly.
Longer than other entry door hinges, these piano-style hinges run the entire length of doors for strength and durability.
The mounting holes form an industry-standard half-moon shape.
The hinge pin is permanently attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin.
To reinforce loose or damaged hinges, mount one of these hinges to the top edge of the pull-side of the door.
Designed to wrap around the edge of the partition frame, these hinges provide a stronger hold than other toilet partition door hinges.
Mounting slots allow door alignment adjustments during and after hinge installation.
The leaves of these hinges almost touch when the door is closed. They are often used in electrical enclosures for a tight seal.
When the door is closed, the distance between the leaves is larger than the pin diameter, creating an offset to accommodate a gasket or trim.
A spring in these hinges automatically swings doors and gates closed behind you.
With large pin diameters for added strength, these hinges can hold heavier doors and gates than other strap hinges.
The hinge pin attaches to the frame leaf so you can quickly lift the door off the hinge without removing the pin.
Wide hinge leaves provide a large mounting surface to keep trailer doors from sagging.