Maintain and repair these valves without unthreading pipe connections. They have a three-piece bolted body that disassembles inline for access to internal components. Use with water, oil, air, inert gas, and steam.

Protect personnel and equipment in the presence of diesel fuel, fuel oil, gasoline, and kerosene. Fire-tested to meet American Petroleum Institute (API) 607, Edition 4, these valves are designed to securely isolate fluid and prevent the spread of fire.

Their ball-valve design allows these valves to handle three times the flow of butterfly valves.

Rated for twice the pressure of other threaded flow-adjustment valves, these are often used in refineries and other demanding environments. Use with water, oil, air, and inert gas. They gradually open and close to adjust and regulate flow.

Rated for steam pressures up to 100 psi @ 400° F, these valves have PTFE seats for excellent temperature resistance. They bolt to flanges to adjust and regulate flow in flanged pipelines.

Designed for high-pressure instrumentation applications, these valves are rated for up to 10,000 psi and have a hex nut and threads below the handle for panel mounting. Use with water, oil, air, and inert gas. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control.

Use these valves with water, oil, air, and inert gas. Turn the handle to adjust flow in small increments for metering, sampling, and other applications requiring fine flow control.

Also known as block and bleed valves, these have a vent port that allows you to remove instrumentation equipment attached to the valve without depressurizing your line. Turn the handle to shut off flow and remove the vent port plug to drain liquid trapped in the valve. Use them with water, oil, air, and inert gas. These valves adjust flow in small increments for metering, sampling, and other applications requiring fine flow control.

Bolt these valves to flanges to divert flow between ports in flanged pipelines. They’re for use with water, oil, air, and inert gas.

Insert unthreaded pipe into the socket ends and weld to create a permanent, leak-tight connection.

Since both hands are required to simultaneously press the buttons, these valves protect workers from accidental machinery start-up. They create one action, such as extending a cylinder.

These valves create one action, such as extending a cylinder. Use your foot to operate them, leaving your hands free to perform other tasks. Also known as 3-way or 3/2 valves.

Also known as solenoid valves, these valves are operated by an electrical signal to turn airflow on or off.

When your compressor turns off, it creates back pressure that opens these valves automatically, allowing liquid to escape.

Compatible with Lincoln-shape plugs and sockets.

Also known as automotive couplings. Compatible with Tru-Flate-shape plugs and sockets.

Compatible with Japanese-shape plugs and sockets.

Use these couplings at pressures up to 6,500 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with Snap-Tite H-Shape plugs and sockets.

Use these couplings at pressures up to 10,000 psi. Also known as flush-face couplings, the plugs and sockets have a flat face, which allows them to mate close together, reducing fluid loss when connecting and disconnecting the line. They are compatible with High-Pressure Minimal-Spill-shape plugs and sockets.

Use these couplings at pressures up to 3,000 psi. They consist of a plug and socket that connect and disconnect quickly. Use them if you need frequent access to a line. They are compatible with Pioneer-shape plugs and sockets.

Ideal for lines with rapid changes in pressure and flow, these couplings have threads that lock them together. They connect more securely than push-to-connect couplings, whose bearings wear out in high-impulse conditions.

Unlike other manifolds, which have an inlet on either end, these have one inlet on the opposite side from the outlets. This design allows air or fluid to follow a straight path, improving flow through your system. Also known as headers.

Rated for more than double the temperature of standard pressure-regulating valves, these can withstand temperatures up to 550° F.

For use with acetylene, hydrogen, methane, propane, or propylene gas.

A tapered needle gives you more precise control than standard flow-adjustment inline hydraulic valves.

Maintain a fixed flow rate even if pressure changes in the system.

Lock the handle using a padlock.

Also known as check valves, these open to allow flow in one direction and close when flow stops or reverses.

As chain, gears, and conveyors move, these brushes rotate to apply lubricant.

Add faucets to oil dispensing stations for increased utility.

Choose these blocks if you need to lubricate multiple points but need to control how each is greased. Unlike grease fitting manifolds, these blocks have multiple fittings, so you control what each point receives and when.

Connect up to five rams to a single pump.