Stick Electrodes For Joining Steel

Filter by

AWS Material Code

Diameter

For Joining

Weight

Welding Current Designation

Length

Tensile Strength

60,000 psi to 69,999 psi

70,000 psi to 79,999 psi

80,000 psi to 99,999 psi

100,000 psi or greater

Approximate Rods per Pound

Finish

Flux Coated

Performance

Fast Deposit

High Strength

Increased Penetration

Tight Space

Wear Resistant

Export Control Classification Number (ECCN)

1C995

EAR99

DFARS Specialty Metals

Exempt

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Shape

REACH

RoHS

Application

Braze Type

Melting Temperature

Minimum Temperature

Maximum Temperature

78 Products

Stick Electrodes for Inspection-Quality Welds on Steel

These electrodes are low hydrogen for X-ray quality welds. The flux coating produces good stability, speed, and welding performance.

	Lg.	Tensile Strength, psi	Welding Current Designation	Approx. Rods per lb.		1 lb.	5 lbs.	50 lbs.
E7018



	3/32"	14"	70,000	AC, DCEP	20	7973A415	—	000000	0000000


	1/8"	14"	70,000	AC, DCEP	10	7973A416	—	00000	000000
	5/32"	14"	70,000	AC, DCEP	9	7973A417	—	00000	000000
	3/16"	14"	70,000	AC, DCEP	6	7973A225	000000	00000	000000
	7/32"	18"	70,000	AC, DCEP	4	7973A425	—	—	000000
	1/4"	18"	70,000	AC, DCEP	3	7973A226	00000	00000	000000

Stick Electrodes for Steel

E6013 is excellent for joining misaligned pieces and welding thin metal under low heat. It deposits easily and smoothly. The flux coating on these electrodes produces good stability, speed, and welding performance.

	Lg.	Tensile Strength, psi	Welding Current Designation	Approx. Rods per lb.		1 lb.	5 lbs.	40 lbs.	50 lbs.
E6013



	1/16"	10"	60,000	AC, DCEP, DCEN	70	7973A176	000000	—	—	—


	1/16"	14"	60,000	AC, DCEP, DCEN	70	7973A401	—	000000	0000000	—
	5/64"	14"	60,000	AC, DCEP, DCEN	40	7973A418	00000	00000	—	—
	3/32"	14"	60,000	AC, DCEP, DCEN	20	7973A419	00000	00000	—	—
	1/8"	14"	60,000	AC, DCEP, DCEN	10	7973A408	00000	00000	—	—
	5/32"	14"	60,000	AC, DCEP, DCEN	9	7973A409	—	00000	—	0000000
	3/16"	14"	60,000	AC, DCEP, DCEN	7	7973A411	00000	00000	—	—

Stick Electrodes for Inspection-Quality Welds on Steel Pipe

The flux coating on these electrodes produces good stability, speed, and welding performance. They’re often used in the pipe welding industry and produce X-ray quality welds in all positions.

You should match or exceed the tensile strength of the material you’re welding.

E7010-P1 and E8010-P1—E7010-P1 and E8010-P1 electrodes are good for vertical-down welding.

	Lg.	Tensile Strength, psi	Welding Current Designation	Approx. Rods per lb.		1 lb.	5 lbs.	50 lbs.
E6010



	3/32"	14"	60,000	DCEP	25	7973A403	000000	000000	0000000


	1/8"	14"	60,000	DCEP	15	7973A404	—	00000	000000
	5/32"	14"	60,000	DCEP	10	7973A405	0000	00000	000000


	E7010-P1



			1/8"	14"	70,000	DCEP	15	7973A481	—	—	000000


			E8010-P1



					1/8"	14"	80,000	DCEP	15	7973A482	—	—	000000

Stick Electrodes for Copper, Brass, and Bronze

Weld copper, brass, and bronze with these electrodes. The flux coating produces good stability, speed, and welding performance.

ECuSn-C—ECuSn-C electrodes are commonly used for metallic carbon arc welding of brass, bronze, and copper to themselves, and to mild steel, stainless steel, and cast iron.

	Lg.	Tensile Strength, psi	Welding Current Designation	Approx. Rods per lb.		0.5 lb.	1 lb.	5 lbs.
ECuSn-C



	1/8"	12"	50,000	AC, DCEN	10	7973A231	000000	000000	0000000

Stick Electrodes for AC Power Source for Inspection-Quality Welds on Steel

These electrodes are designed for optimum performance when used with an AC power source. They are low hydrogen for X-ray quality welds. The flux coating produces good stability, speed, and welding performance.

	Lg.	Tensile Strength, psi	Welding Current Designation	Approx. Rods per lb.		1 lb.	5 lbs.
E7018



	3/32"	14"	70,000	AC, DCEP	20	7973A42	000000	000000


	1/8"	14"	70,000	AC, DCEP	10	7973A421	00000	00000
	5/32"	14"	70,000	AC, DCEP	9	7973A422	00000	00000

Stick Electrodes for Vertical and Overhead Welding on Steel

Since they solidify quickly, these E6011 electrodes can be used for vertical and overhead welding. They work best with an AC power source. Their flux coating produces good stability, speed, and welding performance.

	Lg.	Tensile Strength, psi	Welding Current Designation	Approx. Rods per lb.		1 lb.	5 lbs.	50 lbs.
E6011



	3/32"	14"	60,000	AC, DCEP	25	7973A423	000000	000000	0000000


	1/8"	14"	60,000	AC, DCEP	15	7973A406	00000	00000	000000
	5/32"	14"	60,000	AC, DCEP	10	7973A407	—	00000	000000
	3/16"	14"	60,000	AC, DCEP	6	7973A891	—	00000	—

Stick Electrodes for Nickel

Weld nickel with these electrodes.

ENiCrFe-3—ENiCrFe-3 electrodes weld nickel alloys to themselves and to steel and stainless steel. Welds made with these electrodes have excellent wear resistance in high-heat applications and are often used in surfacing and clad-side welding.

						0.5 lb.		1 lb.		5 lbs.
	Dia.	Lg.	Tensile Strength, psi	Welding Current Designation	Approx. Rods per lb.		Pkg.		Pkg.		Pkg.
ENiCrFe-3



		3/32"	12"	80,000	DCEP	25	7973A841	000000	7973A842	000000	7973A843	0000000


		1/8"	14"	80,000	DCEP	15	7973A852	00000	7973A853	00000	7973A854	000000
		5/32"	14"	80,000	DCEP	9	7973A861	00000	7973A862	00000	7973A863	000000

Fast-Deposit Stick Electrodes for Steel

Make welds quickly with these fast-melting electrodes. The flux coating produces good stability, speed, and welding performance.

						1 lb.		5 lbs.		50 lbs.
	Dia.	Lg.	Tensile Strength, psi	Welding Current Designation	Approx. Rods per lb.		Pkg.		Pkg.		Pkg.
E7014



		1/16"	14"	70,000	AC, DCEP, DCEN	65	———	0	7973A851	000000	———	0


		3/32"	14"	70,000	AC, DCEP, DCEN	20	7973A134	000000	7973A135	00000	7973A556	0000000
		1/8"	14"	70,000	AC, DCEP, DCEN	10	7973A136	00000	7973A137	00000	7973A559	000000
		5/32"	14"	70,000	AC, DCEP, DCEN	9	7973A138	0000	7973A139	00000	7973A563	000000

Increased-Penetration Fast-Deposit Stick Electrodes for Steel

These electrodes penetrate deeper into the base material for higher-quality welds than standard fast-deposit stick electrodes for steel. The flux coating produces good stability, speed, and welding performance.

	Lg.	Tensile Strength, psi	Welding Current Designation	Approx. Rods per lb.		5 lbs.	50 lbs.
E7024



	3/32"	14"	70,000	AC, DCEP, DCEN	25	7973A198	000000	—


	1/8"	14"	70,000	AC, DCEP, DCEN	9	7973A402	00000	0000000

Stick Electrodes for Joining Dissimilar Steels and Stainless Steels

The flux coating produces good stability, speed, and welding performance.

Lg.	Tensile Strength, psi	Welding Current Designation	Approx. Rods per lb.		1 lb.	5 lbs.



3/32"	12"	132,000	AC, DCEP	20	7973A771	000000	000000


1/8"	12"	132,000	AC, DCEP	10	7973A781	00000	00000

Stick Electrodes for Joining Dissimilar Irons and Steels

Join gray iron, ductile iron, malleable iron, and alloy cast iron to themselves, to each other, and to mild steel. The flux coating produces good stability, speed, and welding performance.

	Lg.	Tensile Strength, psi	Welding Current Designation	Approx. Rods per lb.		0.5 lb.	1 lb.	5 lbs.
ENiFe-CI



	3/32"	12"	84,000	AC, DCEP	20	7973A761	000000	000000	0000000


	1/8"	12"	84,000	AC, DCEP	10	7973A251	00000	00000	000000
	3/16"	12"	84,000	AC, DCEP	7	7973A253	—	00000	000000

Stick Electrodes for Joining Cast Iron to Steel and Stainless Steel

Made of 85% pure nickel, these electrodes join cast iron to itself, and to mild steel and stainless steel. Their welds are easily machinable due to their high nickel content. They’re often used to repair castings. The flux coating produces good stability, speed, and welding performance.

	Lg.	Tensile Strength, psi	Welding Current Designation	Approx. Rods per lb.		0.5 lb.	1 lb.	5 lbs.
ENi-CI



	3/32"	12"	65,000	AC, DCEP	20	7973A612	000000	000000	0000000


	1/8"	12"	65,000	AC, DCEP	10	7973A241	00000	00000	000000
	5/32"	14"	65,000	AC, DCEP	9	7973A707	—	00000	—
	3/16"	14"	65,000	AC, DCEP	6	7973A728	—	00000	—

Wear-Resistant Stick Electrodes for Steel and Stainless Steel

Increase the wear resistance of your base metal, or restore a worn-down surface with these electrodes. The flux coating produces good stability, speed, and welding performance.

Lg.	Tensile Strength, psi	Welding Current Designation	Hardness	Approx. Rods per lb.		1 lb.	5 lbs.



3/32"	12"	132,000	AC, DCEP	Rockwell C55	10	7973A646	000000	000000


1/8"	12"	132,000	AC, DCEP	Rockwell C55	15	7973A649	00000	00000
5/32"	12"	132,000	AC, DCEP	Rockwell C55	9	7973A653	00000	00000

Flux-Included Brazing Alloys

No need to add flux—these alloys have it built in. Use them in general purpose applications with most metals. These alloys do not include cadmium, so they are safer to use than brazing alloys with cadmium and help meet industry regulations.

Flux Coated, Without Cadmium—For Joining Brass, Bronze, Cast Iron, Copper, Nickel, Stainless Steel, and Steel

Image of Product. Front orientation. Brazing Alloys. Flux-Included Brazing Alloys.

RBCuZn-C—RBCuZn-C alloys create less fumes than other alloys.

	Material Composition								1 lb.		5 lb.
AWS Material Code	Copper	Zinc	Tin	Cadmium	Melting Temp. Range, ° F	Dia.	Lg.	Approx. Rods per lb.		Pkg.		Pkg.
RBCuZn-C	58%	41%	1%	0%	1,595 to 1,630	1/16"	18"	35	7972A222	000000	7972A223	000000
RBCuZn-C	58%	41%	1%	0%	1,595 to 1,630	3/32"	36"	10	7972A225	00000	7972A226	00000
RBCuZn-C	58%	41%	1%	0%	1,595 to 1,630	1/8"	36"	6	7972A228	00000	7972A229	00000
RBCuZn-C	58%	41%	1%	0%	1,595 to 1,630	5/32"	36"	5	7972A911	00000	7972A912	000000
RBCuZn-C	58%	41%	1%	0%	1,595 to 1,630	3/16"	36"	3	7972A232	00000	7972A233	000000
RBCuZn-C	58%	41%	1%	0%	1,595 to 1,630	1/4"	36"	2	7972A913	00000	7972A914	000000

Flux Coated, Without Cadmium—For Joining Brass, Bronze, Carbide, Cast Iron, Copper, Nickel, Stainless Steel, and Steel

	Material Composition										Brazing Alloys			1 lb.
AWS Material Code	Silver	Copper	Zinc	Cadmium	Melting Temp. Range, ° F	Dia.	Lg.	Specs. Met	Mil. Spec.	Approx. Rods per lb.	Pkg. Qty.		Pkg.		Pkg.
BAg-5	45%	30%	25%	0%	1,175 to 1,235	1/16"	18"	AWS A5.8	Fed. Spec. QQ-B-654	30	8	76935A11	0000000	76935A14	0000000
BAg-5	45%	30%	25%	0%	1,175 to 1,235	3/32"	18"	AWS A5.8	Fed. Spec. QQ-B-654	15	8	76935A13	000000	76935A15	000000

Flux-Included High-Strength Brazing Alloys

No need to add flux—these alloys have it built in. They create stronger bonds than standard brazing alloys. Since these alloys don’t contain cadmium, they are safer to use than brazing alloys with cadmium and help you meet industry regulations.

		Material Composition
	AWS Material Code	Silver	Copper	Zinc	Tin	Cadmium	Melting Temp. Range, ° F	Braze Type	Dia.	Lg.	Wt., oz.	Pkg. Qty.		Pkg.
For Joining Brass, Bronze, Carbide, Cast Iron, Copper, Nickel, Stainless Steel, and Steel



		BAg-7	56%	22%	17%	5%	0%	1,140 to 1,200	Flux Coated, Without Cadmium	1/16"	18"	4	8	76935A12	0000000


		BAg-7	56%	22%	17%	5%	0%	1,140 to 1,200	Flux Coated, Without Cadmium	3/32"	18"	4	4	7315N11	000000

Flux-Included Brazing Alloys for Tight Gaps

Fill in tight gaps without needing to add flux before you braze—these alloys have flux built in. When melted, these alloys form a thin liquid that easily flows into smaller gaps than standard brazing alloys. They’re often used in the piping and automotive industry. Since they don’t contain cadmium, they’re safer to use than brazing alloys with cadmium and help meet industry regulations.

		Material Composition
	AWS Material Code	Silver	Copper	Zinc	Tin	Cadmium	Melting Temp. Range, ° F	Braze Type	Dia.	Lg., ft.	Wt., oz.	Pkg. Qty.		Pkg.
For Joining Brass, Bronze, Carbide, Cast Iron, Copper, Nickel, and Steel



		BAg-36	45%	27%	25%	3%	0%	1,185 to 1,260	Flux Coated, Without Cadmium	1/16"	1 1/2	2.3	8	7268N11	0000000