Lanyard with Anchor Straps

Filter by

Anchor Point Attachment Method

Hook Over

Wraparound

System of Measurement

Length

Weight Capacity

Snap Hook Opening Size

Number of Anchor End Connections

Construction

Performance

Material

Application

Harness End Connector Material

Aluminum

Steel

Quick-Stop Lanyard Class

Class 1

Class 2

Length After Fall

10 ft.

Anchor End Connection Hardware

Carabiner

Snap Hook

Harness End Connection Hardware

Carabiner with Swivel Eye

RoHS

Specifications Met

REACH

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

EAR99

Anchor End Connector Material

Steel

Housing Material

Plastic

Minimum Fall Clearance Required

Finish

Color

21 Products

Shock-Absorbing Fall-Arrest Lanyards with Anchor


Hook Over	Wraparound


Hook Over with 1 Anchor End Connection	Hook Over with 2 Anchor End Connections

Wraparound with 1 Anchor End Connection	Wraparound with 2 Anchor End Connections

A lanyard and an anchor in one—these lanyards attach to rated structures to give you a secure place to clip in for fall protection. If you fall when working at height, these lanyards extend to slow and stop your fall. However, you'll fall farther than you would with a quick-stop lanyard. When used together with a harness and anchor, these lanyards help you meet OSHA and ANSI safety standards.

Hook-Over Anchor Point—Hook-over lanyards have a large snap hook, known as a rebar hook, that attaches directly to a rated structure such as a scaffold or pipe to create an anchor point.

Wraparound Anchor Point—Wraparound lanyards loop around a rated structure such as an I-beam and then attach to themselves to create an anchor point.

1 Anchor End Connection—Lanyards with 1 anchor end connection are for working in a single location.

2 Anchor End Connections—Lanyards with 2 anchor end connections let you move between anchors while staying tethered. Attach to the new anchor point before disconnecting from the previous one.

Webbing—Webbing lanyards are flexible and lightweight, so they won't weigh you down.

Wire Rope—Wire rope lanyards are more abrasion resistant than webbing lanyards, so they withstand sharp edges without fraying or snapping. They have a bright green plastic coating to make damage obvious during inspections.

Impact-Indicating Stitching—Lanyards with impact-indicating stitching have patches designed to tear during a fall or impact, so it’s easy to tell if a lanyard is still safe to use.

RFID Tag—Lanyards with an RFID tag can be scanned to log inspections, track usage, and schedule maintenance to keep your lanyard compliant with safety regulations.

					Harness End Connection		Anchor End Connection
	Lg., ft.	Lg. After Fall, ft.	Material	Coating Material	Hardware	Material	Hardware	Material	Snap Hook Opening Size	Wt. Cap., lb.	Specs. Met	Features		Each
Hook Over with 1 Anchor End Connection







				Abrasion Resistant, Shock Absorbing Wire Rope

				6	10	Steel	Polyurethane Plastic	Snap Hook	Steel	Snap Hook	Steel	1 1/4", 2 1/2"	420	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	00000000	000000




						Shock Absorbing Webbing

						6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	3/4", 2 1/2"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	00000000	00000


						6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	13/16", 2 1/2"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	UV Resistant	00000000	00000


						Hook Over with 2 Anchor End Connections







										Abrasion Resistant, Shock Absorbing Wire Rope

										6	10	Steel	Polyurethane Plastic	Snap Hook	Steel	Snap Hook	Steel	1 1/4", 2 1/2"	420	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	Impact-Indicating Stitching	00000000	000000




												Shock Absorbing Webbing

												6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	1 1/2", 3"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	UV Resistant	00000000	000000


												Wraparound with 1 Anchor End Connection







																Shock Absorbing Webbing

																6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	RFID Tag	0000000	00000


																4 to 6	10	Nylon	—	Snap Hook	Steel	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	RFID Tag	0000000	000000


																Wraparound with 2 Anchor End Connections







																		Shock Absorbing Webbing

																		6	10	Polyester Plastic	—	Snap Hook	Steel	Snap Hook	Steel	3/4"	310	ANSI/ASSP Z359.13, OSHA Compliant 29 CFR 1926.502	RFID Tag	0000000	000000

Quick-Stop Retracting Fall-Arrest Lanyards with Anchor


Hook Over	Wraparound


Hook-Over Anchor Point 1 Anchor End Connection	Hook-Over Anchor Point, 2 Anchor End Connections	Wraparound Anchor Point, 1 Anchor End Connection	Wraparound Anchor Point, 2 Anchor End Connections

Clip these lanyards onto a rated structure—they form their own anchor. They extend and retract as you move around, but with a sudden jerk, such as a fall, they immediately lock like a seat belt to stop you. They stop your fall within inches, unlike shock-absorbing lanyards that extend several feet. A built-in shock absorber reduces the jolt of the stop. Used together with a harness, they help you meet OSHA and ANSI safety standards.

Class 1—Use Class 1 lanyards when the anchor is at the same level as or above your D-ring.

Class 2—Class 2 lanyards are more versatile than Class 1 lanyards. Use them when the anchor is above, level with, or up to 5 ft. below your D-ring. Since they're made with Kevlar webbing or wire rope, they meet safety standards to prevent fraying or breaking if you fall near a sharp edge.

Hook-Over Anchor Point—Hook-over lanyards have a large snap hook, known as a rebar hook, that attaches directly to a rated structure such as a scaffold or pipe to create an anchor point.

Wraparound Anchor Point—Wraparound lanyards loop around a rated structure such as an I-beam and then attach to themselves to create an anchor point.

1 Anchor End Connection—Lanyards with 1 anchor end connection are best when you’re working in a single location.

2 Anchor End Connections—Lanyards with 2 anchor end connections let you move between anchors while staying tethered. Attach the new anchor point before disconnecting the previous one.

Webbing—Webbing lanyards are flexible and lightweight, so they won't weigh you down.

Wire Rope—Wire rope lanyards hold up to abrasion better than webbing lanyards for a longer lifespan.

Anchored Housing—Lanyards with an anchored housing are easier on your back than other retracting lanyards, since the weight of the housing hangs on the anchor rather than your harness’s D-ring.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Material	Construction	Hardware	Material	Hardware	Material	Carabiner Opening Wd.	Snap Hook Opening Size	Housing Material	Wt. Cap., lb.	Specs. Met	Features		Each
Class 1—Hook Over







				1 Anchor End Connection

				6	UHMW Polyethylene	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	2"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Anchored Housing, Lightweight Aluminum Hardware	00000000	0000000




						2 Anchor End Connections

						6	UHMW Polyethylene	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	2"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Anchored Housing, Lightweight Aluminum Hardware	00000000	000000


						Class 1—Wraparound







										1 Anchor End Connection

										9	UHMW Polyethylene	Webbing	Carabiner with Swivel Eye	Steel	Snap Hook	Steel	2"	3/4"	Plastic	400	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	—	00000000	000000


										Class 2—Hook Over







														1 Anchor End Connection

														8	Galvanized Steel	Wire Rope	Pin Retainer	Steel	Snap Hook	Steel	—	2 1/2"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	00000000	000000


														8	Kevlar	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	2 1/2"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Aluminum Hardware, UV Resistant	00000000	000000




																2 Anchor End Connections

																8	Galvanized Steel	Wire Rope	Pin Retainer	Steel	Snap Hook	Steel	—	2 1/2"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	00000000	000000


																8	Kevlar	Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	2 1/2"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Aluminum Hardware, UV Resistant	00000000	000000


																Class 2—Wraparound







																		1 Anchor End Connection

																		8	Galvanized Steel	Wire Rope	Pin Retainer	Steel	Snap Hook	Steel	—	5/8"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	00000000	000000


		8	Kevlar															Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	1"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Aluminum Hardware, UV Resistant	00000000	000000




				2 Anchor End Connections

				8	Galvanized Steel													Wire Rope	Pin Retainer	Steel	Snap Hook	Steel	—	5/8"	Plastic	310	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1910.140, OSHA Compliant 29 CFR 1926.502	Hand Grip	00000000	000000


				8	Kevlar													Webbing	Pin Retainer	Aluminum	Snap Hook	Steel	—	1"	Plastic	420	ANSI/ASSP Z359.14, OSHA Compliant 29 CFR 1926.502	Lightweight Aluminum Hardware, UV Resistant	00000000	000000

Electrical Arc-Flash-Resistant Shock-Absorbing Fall-Arrest Lanyards with Anchor

Made of Kevlar, these lanyards meet ASTM F887 when used with an arc-flash-resistant harness. Wrap the lanyard around a rated structure, such as an I-beam, and then attach it to itself to create an anchor point. Use them when working in a single location. When used together with a harness, they help you meet OSHA and ANSI safety standards.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Lg. After Fall, ft.	Material	Hardware	Material	Hardware	Material	Snap Hook Opening Size	Wt. Cap., lb.	Specs. Met		Each
Wraparound with 1 Anchor End Connection







				Arc Flash Resistant, Shock Absorbing Webbing

				6	10	Kevlar	Snap Hook	Steel	Carabiner	Steel	7/8"	310	ANSI/ASSP Z359.13, ASTM F887, OSHA Compliant 29 CFR 1910.66, OSHA Compliant 29 CFR 1926.502	0000000	0000000

Heat-Resistant Shock-Absorbing Fall-Arrest Lanyards with Anchor

Made of steel, these durable lanyards hold up in abrasive and high-heat applications. Attach the large snap hook directly to a rated structure, such as a scaffold or pipe, to create an anchor point. When used together with a harness, they help you meet OSHA and ANSI safety standards.

				Harness End Connection		Anchor End Connection
	Lg., ft.	Lg. After Fall, ft.	Material	Hardware	Material	Hardware	Material	Snap Hook Opening Size	Wt. Cap., lb.	Specs. Met		Each
Hook Over with 1 Anchor End Connection







				Heat Resistant, Shock Absorbing Wire Rope

				6	10	Steel	Snap Hook	Steel	Snap Hook	Steel	3/4", 2 1/2"	310	ANSI/ASSP Z359.13, ANSI/ASSP Z359.3, ASTM F887	000000	0000000