Made of a pliable PVC with a rubber adhesive, this tape stretches and conforms to uneven surfaces for a secure hold.

Striped patterns make hazard boundaries and pedestrian pathways immediately recognizable on warehouse and factory floors. The vinyl construction resists scuffing and holds its color under foot traffic, while the smooth surface stays clean without trapping debris.

Designate aisles and work zones in your clean room. Individually bagged, this tape is made to the highest standards for cleanliness, releasing minimal contaminants and leaving no residue behind. The colored warning stripes resist fading over time.

Call attention to hazards in low-light conditions.

Thicker than other floor marking tape, this tape withstands abrasion in high-traffic areas.

Identify safety zones and hazards in the dark for up to six hours.

Use a blower or vacuum to insert this lightweight threading line into conduit or raceway and attach it to your pulling rope to guide the rope. Made of polypropylene, this line is mildew resistant, so it can be left in place for future use.

Note: Not for directly pulling wire or cable.

Mount these retractable belt barriers to a wall to control foot traffic and restrict access in hallways, doorways, and along building perimeters without taking up floor space. The belt extends from the wall-mounted housing to a wall receptacle on the opposite side, creating a visible barrier line. Striped belts in black/yellow or red/white provide high-visibility warnings suited for hazard zones and safety-restricted areas.

Outdoor—Weather-resistant housings available in 15-foot and 24-foot lengths, suited for loading docks, outdoor queuing areas, and building exteriors where the barrier will be exposed to the elements.

Striped—Provide high-visibility warnings in hazard zones and safety-restricted areas.

Control foot traffic and restrict access to off-limits areas with these freestanding belt barriers. The polyester belt resists fraying and retracts automatically into the post housing for compact storage. To make a complete unit, team one or more belt barriers with a wall receptacle or receiver post.

To make a complete unit, team one or more belt barriers with a wall receptacle or receiver post.

Attach to upright rack shelving to block off aisles.

When the belt is extended, a connecting clip on the end secures it to the shelving holes or you can wrap the belt around a post and hook the clip to the belt. Rack shelving must have holes on 1 _1/2" centers.