Aluminum Slip-On Framing and Fittings
Half the weight of steel, this aluminum framing resists corrosion in wet environments. Slip the fittings over rails to construct custom railings, guard rails, storage racks, and shelving. Tighten the included set screws for a secure hold.
For technical drawings and 3-D models, click on a part number.
Adjustable-angle fittings can be positioned at any angle. Tighten the set screw to secure.
| For Rail OD | Material | Includes | Each | |
90° Elbow | ||||
|---|---|---|---|---|
| 1" | Aluminum | Set Screws | 0000000 | 000000 |
| 1 1/4" | Aluminum | Set Screws | 0000000 | 00000 |
| 1 5/8" | Aluminum | Set Screws | 0000000 | 00000 |
| 1 7/8" | Aluminum | Set Screws | 0000000 | 00000 |
| 2 3/8" | Aluminum | Set Screws | 00000000 | 00000 |
Adjustable-Angle Elbow | ||||
| 1" | Aluminum | Set Screws | 0000000 | 00000 |
| 1 1/4" | Aluminum | Set Screws | 0000000 | 00000 |
| 1 5/8" | Aluminum | Set Screws | 0000000 | 00000 |
| 1 7/8" | Aluminum | Set Screws | 0000000 | 00000 |
Three-Way 90° Elbow | ||||
| 1" | Aluminum | Set Screws | 00000000 | 00000 |
| 1 1/4" | Aluminum | Set Screws | 00000000 | 00000 |
| 1 5/8" | Aluminum | Set Screws | 00000000 | 00000 |
| 1 7/8" | Aluminum | Set Screws | 00000000 | 00000 |
| 2 3/8" | Aluminum | Set Screws | 00000000 | 00000 |
Through-hole fittings allow rails to run all the way through.
Adjustable-angle fittings can be positioned at any angle. Tighten the set screw to secure.
| For Rail OD | No. of Through Holes | Material | Includes | Each | |
Four-Way 90° Elbow | |||||
|---|---|---|---|---|---|
| 1" | 1 | Aluminum | Set Screws | 0000000 | 000000 |
| 1 1/4" | 1 | Aluminum | Set Screws | 0000000 | 00000 |
| 1 5/8" | 1 | Aluminum | Set Screws | 0000000 | 00000 |
| 1 7/8" | 1 | Aluminum | Set Screws | 0000000 | 00000 |
| 2 3/8" | 1 | Aluminum | Set Screws | 0000000 | 00000 |
Four-Way Adjustable-Angle Elbow | |||||
| 1" | 1 | Aluminum | Set Screws | 0000000 | 00000 |
| 1 1/4" | 1 | Aluminum | Set Screws | 0000000 | 00000 |
| 1 5/8" | 1 | Aluminum | Set Screws | 0000000 | 00000 |
| 1 7/8" | 1 | Aluminum | Set Screws | 0000000 | 00000 |
| 2 3/8" | 1 | Aluminum | Set Screws | 00000000 | 00000 |
Carbon Fiber Slip-On Framing and Fittings
Stronger than plastic and aluminum, this is the lightest weight framing we offer. It has good resistance to chemicals and salt water. Slip the fittings over rails to construct custom railings, guard rails, storage racks, and shelving. Drill rails and connect fittings with the included hardware.
For technical drawings and 3-D models, click on a part number.
Connectors come with a universal body and arms that you attach to configure as shown.
Adjustable-angle wye can be positioned at any angle. Tighten the set screw to secure.
Removable tee allows quick assembly and disassembly of tee connectors at any point along a rail.
T-slotted framing adapter slides into T-slots to connect carbon fiber framing to T-slotted rails.
| Slip-On Framing Component Shape | For Rail ID | For T-Slot Rail Ht. | Range of Motion | Material | Includes | Each | |
| 90° Elbow, Straight | 1 1/2" | __ | __ | Black Anodized Aluminum | Connecting Hardware | 0000000 | 0000000 |
| Three-Way 90° Elbow, Tee | 1 1/2" | __ | __ | Black Anodized Aluminum | Connecting Hardware | 0000000 | 000000 |
| Four-Way 90° Elbow, Cross | 1 1/2" | __ | __ | Black Anodized Aluminum | Connecting Hardware | 0000000 | 000000 |
| Five-Way 90° Elbow | 1 1/2" | __ | __ | Black Anodized Aluminum | Connecting Hardware | 0000000 | 000000 |
| Adjustable-Angle Wye | 1 1/2" | __ | 180° | Black Anodized Aluminum | Connecting Hardware | 0000000 | 000000 |
| Removable Tee | 1 1/2" | __ | __ | Black Anodized Aluminum | Connecting Hardware | 0000000 | 000000 |
| T-Slotted Framing Adapter | 1 1/2" | 1 1/2" | __ | Black Anodized Aluminum | Connecting Hardware | 0000000 | 00000 |
Hole-making jig is a template for aligning and drilling accurate holes in rails. Slide the jig over the rail where holes are necessary, drill the holes, and remove the jig.
| For Rail ID | Drill Bit Size | Includes | Each | |
| 1 1/2" | 7/32" | Drill Bit, Hex Keys, Jig | 0000000 | 000000 |
Galvanized Iron and Steel Slip-On Framing and Fittings
To provide corrosion resistance in wet environments, this framing is galvanized. Slip the fittings over rails to construct custom railings, guard rails, storage racks, and shelving. Tighten the included set screws for a secure hold.
Galvanized iron fittings are malleable iron.
For technical drawings and 3-D models, click on a part number.
Adjustable-angle fittings can be positioned at any angle. Tighten the set screw to secure.
| For Rail OD | Material | Includes | Each | |
90° Elbow | ||||
|---|---|---|---|---|
| 1" | Galvanized Iron | Set Screws | 00000000 | 000000 |
| 1 3/8" | Galvanized Iron | Set Screws | 0000000 | 00000 |
| 1 5/8" | Galvanized Iron | Set Screws | 0000000 | 00000 |
| 1 7/8" | Galvanized Iron | Set Screws | 0000000 | 00000 |
| 2 3/8" | Galvanized Iron | Set Screws | 0000000 | 00000 |
Adjustable-Angle Elbow | ||||
| 1 7/8" | Galvanized Iron | Set Screws | 00000000 | 00000 |
Three-Way 90° Elbow | ||||
| 1" | Galvanized Iron | Set Screws | 00000000 | 00000 |
| 1 3/8" | Galvanized Iron | Set Screws | 0000000 | 00000 |
| 1 5/8" | Galvanized Iron | Set Screws | 0000000 | 00000 |
| 1 7/8" | Galvanized Iron | Set Screws | 0000000 | 00000 |
| 2 3/8" | Galvanized Iron | Set Screws | 00000000 | 00000 |
Through-hole fittings allow rails to run all the way through.
Adjustable-angle fittings can be positioned at any angle. Tighten the set screw to secure.
| For Rail OD | No. of Through Holes | Material | Includes | Each | |
Four-Way 90° Elbow | |||||
|---|---|---|---|---|---|
| 1" | 1 | Galvanized Iron | Set Screws | 00000000 | 000000 |
| 1 3/8" | 1 | Galvanized Iron | Set Screws | 0000000 | 00000 |
| 1 5/8" | 1 | Galvanized Iron | Set Screws | 0000000 | 00000 |
| 1 7/8" | 1 | Galvanized Iron | Set Screws | 0000000 | 00000 |
| 2 3/8" | 1 | Galvanized Iron | Set Screws | 0000000 | 00000 |
Four-Way Adjustable-Angle Elbow | |||||
| 1" | 1 | Galvanized Iron | Set Screws | 00000000 | 00000 |
| 1 3/8" | 1 | Galvanized Iron | Set Screws | 0000000 | 00000 |
| 1 5/8" | 1 | Galvanized Iron | Set Screws | 0000000 | 00000 |
| 1 7/8" | 1 | Galvanized Iron | Set Screws | 00000000 | 00000 |
| 2 3/8" | 1 | Galvanized Iron | Set Screws | 00000000 | 00000 |
Stainless Steel Slip-On Framing and Fittings
Made of 316 stainless steel, this framing has excellent resistance to chemicals and salt water. Slip the fittings over rails to construct custom railings, guard rails, storage racks, and shelving. Tighten the included set screws for a secure hold.
For technical drawings and 3-D models, click on a part number.
Plastic Slip-On Framing and Fittings
In addition to being lightweight and strong, this plastic framing is nonconductive with good resistance to chemicals and salt water. Slip the fittings over rails to construct custom railings, guard rails, storage racks, and shelving. Join the rail and fittings with PVC cement (not included) for a permanent bond or drill and connect with fasteners (not included).
For technical drawings and 3-D models, click on a part number.
Press-Fit Framing and Fittings
No need for fasteners—friction holds this framing together. Use press-fit framing and fittings to assemble carts, enclosures, and partitions.
For technical drawings and 3-D models, click on a part number.
Quick-release fittings use a button system. Use quick-release rails and quick-release connectors together.
Flush-Fit Framing and Fittings
Flush connections between rails and fittings give structures a clean finished look. Use this framing for stair rails, work platforms, and workstations. Slide the rail over a fitting and tighten the included set screw—the fitting grips the rail from the inside.
For technical drawings and 3-D models, click on a part number.
Clamp-On Framing and Fittings
Fittings come in two pieces to clasp over rails, making assembly and disassembly quicker than our other framing. Use it to form temporary partitions, modular conveyors, and workstations. To assemble, clamp fittings onto the rail and tighten the included cap screw and nut. For permanent connections and added strength, fittings have a 5/32" hole to drill in an additional screw (not included).
For technical drawings and 3-D models, click on a part number.
| Clamp-On Framing Component Shape | For Rail OD | Material | Each | |
| 90° Elbow | 1.08" | Black-Painted Steel | 0000000 | 00000 |
Through-hole fittings allow rails to run all the way through.
| Clamp-On Framing Component Shape | For Rail OD | No. of Through Holes | Material | Each | |
| Three-Way 90° Elbow | 1.08" | 1 | Black-Painted Steel | 0000000 | 00000 |
Heavy Duty Clamp-On Framing and Fittings
Thick construction makes this framing strong and sturdy. This system has a secure clamping mechanism to hold heavy loads—no machining or welding required. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations. Clamp fittings onto the rail and tighten the included hex head screws.
For technical drawings and 3-D models, click on a part number.
