Suction Bulbs | McMaster-Carr

Filter by

Capacity

Pump Type

Material

Stem Material

Length

Dispensing Type

Pipette Type

Graduations

Color

Tip Diameter

Graduated

REACH

RoHS

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

For Pipette Capacity

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

Bulb Material

Stem OD

Volume Capacity

Construction

Container Type

Autoclavable

Bulb Diameter

Barrel ID

Clarity

109 Products

Bulb Droppers


Standard	Fine Tip	Wide Tip

Flexible Stem	Removable Bulb	Bellows

Paddle

Squeeze the bulb to dispense liquids one drop at a time. These droppers are also known as transfer pipettes.

Dispenser Boxes—Droppers with a dispenser box stay organized and protected when they’re not in use. The box has a hinged front panel for easy access to droppers.

Fine Tip—Fine tip droppers help you dispense very small volumes. They’re often used with fast-flowing liquids, such as water and gasoline.

Wide Tip—Wide tip droppers are good for thicker liquids, such as gel, syrup, and thin paste.

Flexible Stem—Flexible stem droppers can be curved and bent without kinking to transfer liquids in tight areas.

Removable Bulb—Removable bulb droppers are easy to clean.

Bellows—Bellows droppers have a large, accordion-shaped bulb that creates strong suction. They’re often used with viscous liquids.

Paddle—Paddle droppers have a rigid end that’s used for mixing and spreading.

Soda-Lime Glass Stem—Soda-lime glass droppers are easier to see through than plastic droppers, and they’re less likely to stain. They withstand chemicals, so you can sterilize them for repeated use.

Sterile—Sterile droppers are individually cleaned and bagged to avoid contaminating your sample.

Graduations—Droppers with graduations have molded markings that won’t fade or wash off.

					Stem			Bulb
	Cap.	Graduations, ml	Lg.	Tip Dia.	OD	Material	Color	Material	Color	Features	Pkg. Qty.		Pkg.
Packs







				Standard

				0.777 fl. oz./23 ml	—	1 ft.	1/8"	3/8"	Polyethylene	Clear White	Polyethylene	Clear White	Sterile	20	7029T39	00000


				0.05 fl. oz./1.5 ml	—	4 1/8"	1/16"	3/16"	Polyethylene	Semi-Clear White	Polyethylene	Semi-Clear White	Sterile	20	7029T31	0000
				0.186 fl. oz./5.5 ml	—	8 7/8"	7/64"	3/16"	Polyethylene	Semi-Clear White	Polyethylene	Semi-Clear White	Sterile	10	7029T3	0000
				0.253 fl. oz./7.5 ml	—	5 1/8"	13/64"	3/16"	Polyethylene	Semi-Clear White	Polyethylene	Semi-Clear White	—	10	7029T6	0000
				0.253 fl. oz./7.5 ml	—	6 1/8"	5/64"	5/16"	Polyethylene	Semi-Clear White	Polyethylene	Semi-Clear White	Sterile	10	7029T1	0000




						Fine Tip

						0.034 fl. oz./1 ml	0.25	5 29/32"	9/64"	3/16"	Polyethylene	Clear White	Polyethylene	Clear White	Sterile	10	40865T12	0000


						0.101 fl. oz./3 ml	0.25	5 1/2"	7/64"	3/16"	Polyethylene	Clear White	Polyethylene	Clear White	—	10	40865T2	0000
						0.186 fl. oz./5.5 ml	—	5 3/4"	3/64"	3/16"	Polyethylene	Semi-Clear White	Polyethylene	Semi-Clear White	Sterile	10	7029T2	0000
						0.294 fl. oz./8.7 ml	—	5 3/4"	1/16"	1/4"	Polyethylene	Semi-Clear White	Polyethylene	Semi-Clear White	Sterile	20	7029T32	0000




								Wide Tip

								0.05 fl. oz./1.5 ml	0.1	4 5/8"	1/16"	1/8"	Polyethylene	Clear White	Polyethylene	Clear White	Sterile	20	40865T13	0000


								0.169 fl. oz./5 ml	0.5	6 1/8"	1/8"	1/4"	Polyethylene	Clear White	Polyethylene	Clear White	Sterile	20	40865T14	0000
								0.253 fl. oz./7.5 ml	0.5	6 1/4"	1/8"	5/16"	Polyethylene	Clear White	Polyethylene	Clear White	Sterile	20	40865T15	0000




										Flexible Stem

										0.04 fl. oz./1.2 ml	—	2 1/2"	1/8"	1/8"	Polyethylene	Clear White	Polyethylene	Clear White	Sterile	20	7029T36	0000


										0.135 fl. oz./4 ml	—	3 3/8"	1/8"	1/8"	Polyethylene	Semi-Clear White	Polyethylene	Semi-Clear White	Sterile	20	7029T37	0000
										0.507 fl. oz./15 ml	—	6 1/8"	1/8"	1/8"	Polyethylene	Semi-Clear White	Polyethylene	Semi-Clear White	Sterile	20	7029T38	0000




												Removable Bulb

												0.017 fl. oz./0.5 ml	—	3"	—	1/4"	Polyethylene	Semi-Clear White	Rubber	Black	—	1	4168T11	0000


												0.034 fl. oz./1 ml	—	4"	—	1/4"	Soda-Lime Glass	Clear	Rubber	Black	—	2	4168T22	0000
												0.034 fl. oz./1 ml	—	4 1/2"	—	1/4"	Polyethylene	Semi-Clear White	Rubber	Black	—	1	4168T12	0000




	Bellows

	0.05 fl. oz./1.5 ml												0.5	5 1/4"	5/32"	5/16"	Polyethylene	Semi-Clear White	Polyethylene	Semi-Clear White	—	10	40865T91	0000


	0.169 fl. oz./5 ml	1											7 5/8"	9/64"	5/16"	Polyethylene	Semi-Clear White	Polyethylene	Semi-Clear White	—	10	40865T92	0000


	Dispenser Boxes







														Standard

														0.507 fl. oz./15 ml	1	8 1/2"	1/8"	5/16"	Polyethylene	Clear White	Polyethylene	Clear White	—	250	40865T16	00000


				0.777 fl. oz./23 ml	—									1 ft.	1/8"	5/16"	Polyethylene	Clear White	Polyethylene	Clear White	—	100	40865T17	00000
				0.169 fl. oz./5 ml	0.5									6 1/8"	1/8"	1/4"	Polyethylene	Clear White	Polyethylene	Clear White	—	500	40865T19	00000
				0.253 fl. oz./7.5 ml	0.5									5 3/4"	1/8"	5/16"	Polyethylene	Clear White	Polyethylene	Clear White	—	500	40865T21	00000




														Fine Tip

														0.043 fl. oz./1.3 ml	—	2"	1/16"	1/16"	Polyethylene	Semi-Clear White	Polyethylene	Semi-Clear White	—	500	7029T46	00000


						0.05 fl. oz./1.5 ml	—							4 1/8"	1/16"	3/16"	Polyethylene	Semi-Clear White	Polyethylene	Semi-Clear White	—	400	7029T47	00000
						0.169 fl. oz./5 ml	—							6"	1/32"	3/16"	Polyethylene	Semi-Clear White	Polyethylene	Semi-Clear White	—	250	7029T48	00000
						0.294 fl. oz./8.7 ml	—							5 3/4"	1/16"	1/4"	Polyethylene	Semi-Clear White	Polyethylene	Semi-Clear White	—	400	7029T49	00000




														Wide Tip

								0.05 fl. oz./1.5 ml						0.1	4 5/8"	1/8"	1/8"	Polyethylene	Clear White	Polyethylene	Clear White	—	500	40865T18	00000


								0.236 fl. oz./7 ml	—					4 7/8"	1/4"	5/16"	Polyethylene	Semi-Clear White	Polyethylene	Semi-Clear White	—	500	7029T51	00000




														Flexible Stem

														0.04 fl. oz./1.2 ml	—	2 1/2"	1/8"	1/8"	Polyethylene	Clear White	Polyethylene	Clear White	—	500	7029T42	00000


										0.135 fl. oz./4 ml	—			3 3/8"	1/8"	1/8"	Polyethylene	Semi-Clear White	Polyethylene	Semi-Clear White	—	500	7029T43	00000
										0.219 fl. oz./6.5 ml	—			6 1/8"	1/16"	5/16"	Polyethylene	Semi-Clear White	Polyethylene	Semi-Clear White	—	500	7029T44	00000
										0.507 fl. oz./15 ml	—			6 1/8"	1/8"	1/8"	Polyethylene	Semi-Clear White	Polyethylene	Semi-Clear White	—	250	7029T45	00000




														Paddle

0.027 fl. oz./0.8 ml												—		4 7/8"	1/8"	1/8"	Polyethylene	Semi-Clear White	Polyethylene	Semi-Clear White	—	500	7029T41	00000

Pipette Bulbs


Bulb	Bulb with Control Valves

The simplest form of a pipette pump, these bulbs let you control flow as you quickly draw and dispense liquid. Use them with two hands to ensure they don’t separate from pipettes (not included).

Vinyl Plastic—Vinyl plastic bulbs are more chemical resistant than natural rubber bulbs, helping them resist degrading if you accidentally draw chemicals up into them.

Control Valves—Bulbs with control valves are more precise than bulbs without control valves. They have three valves—one empties air from the bulb, one suctions liquid into the pipette, and one empties the pipette.

		Bulb
	For Pipette Cap. Range, ml	Dia.	Lg.	Material	Color	Features		Each
Bulb



		5 to 50	1 15/16"	3 15/16"	Vinyl Plastic	Blue	—	41405T6	000000


		10 to 100	2 3/16"	5 7/8"	Natural Rubber	Red	Control Valves	5809N11	00000

Bulb Dispensers


Flat-Top Bulb with Clear Stem	With Semi-Clear Stem	With Silver Stem	With Clear Stem

Also known as basters, these dispensers transfer larger amounts of liquid than bulb droppers. Liquids are dispensed in a stream, rather than drop by drop. These dispensers are two pieces, so you can remove the bulb for easy cleaning.

Polystyrene Stem and Polyethylene Stem—Polystyrene and Polyethylene dispensers resist shattering and denting from impact better than glass and stainless steel dispensers.

Stainless Steel Stem—Stainless steel dispensers are more durable than plastic and glass dispensers. They also withstand high heat.

Tempered Glass Stem—Tempered glass dispensers resist staining better than plastic dispensers. They also withstand high heat.

Clear—Clear dispensers let you see the liquid inside and confirm the exact volume, unlike silver dispensers.

Semi-Clear Stem—Semi-clear dispensers let you see the liquid inside and confirm the exact volume, unlike silver dispensers.

Stainless Steel Injector Tip—Dispensers with an injector tip can puncture through a surface to dispense liquid on the inside.

Flat-Top Bulb—Dispensers with a flat-top bulb can rest standing up to prevent dripping between uses.

			Stem			Bulb
Cap.	Graduations	Lg.	OD	Material	Color	Material	Color	Max. Temp., ° F	Includes	Features		Each
30 ml, 1 fl. oz.	1/4 oz., 7.5 ml	11 3/4"	1"	Polystyrene	Clear	Rubber	Red	500	Cleaning Brush	Flat-Top Bulb	1990T21	000000
45 ml, 1 1/2 fl. oz.	1/4 oz.	10 1/2"	7/8"	Polyethylene	Semi-Clear White	Rubber	Black	210	—	—	1990T23	0000
60 ml, 2 fl. oz.	—	10 1/4"	7/8"	Stainless Steel	Silver	Rubber	Orange	500	Cleaning Brush, Stainless Steel Injector Tip	—	1990T24	00000
60 ml, 2 fl. oz.	1/2 oz.	10 1/2"	15/16"	Tempered Glass	Clear	Rubber	Orange	450	—	—	1990T25	00000

Pipettes with Pump

Bulb

Transfer measured streams of liquid.

Bulb—Bulb pipettes require two hands.

		Pipette				Pump
Cap., ml	Graduations, ml	Dia.	Lg.	Material	Color	Lg.	Material		Each







			Bulb

			10	0.1	3/8"	13 3/4"	Borosilicate Glass	Clear	4"	Vinyl Plastic	41405T24	000000

Pipette Pumps


Plunger	Bulb

Draw and dispense liquids at a controlled speed. These pumps give you more control of flow than a basic pipette bulb but not as much as an electronic pump. Use them with a pipette (not included).

Plunger—Plunger pumps can be used with one hand. Turn the thumbwheel to draw liquid into the pipette then press the plunger for quick dispensing. For gradual dispensing, you can use the thumbwheel.

Bulb—Bulb pumps have a lever to set both the aspirating and dispensing speeds. Press the button above the lever to blow out any residual liquids.

		Pump
	For Pipette Cap. Range, ml	Lg.	Material	Removes Particle Size Down To, μm	Body Material	Autoclavable	Features		Each
Plunger



		1 to 2	7 1/8"	TPE	—	Polypropylene	Yes	—	41405T7	000000


		2 to 10	7 1/8"	TPE	—	Polypropylene	Yes	—	41405T8	00000


		Bulb



				0.1 to 100	8"	Silicone Rubber	3	ABS	Yes	Filter	7318T5	00000

Replacement Filters

Removes Particle Size Down To, μm		Each
3	7318T51	00000

Pipette Tip Filters

Pipette Tip Not Included

Filter out contaminants when dispensing samples in labs and other sanitary environments. These filters come in a box that lets you install them on a pipette tip without touching them. They're sterilized by gamma irradiation—use them once and then throw them away.

For Maximum Pipette Tip Capacity—The filters are designed for pipette tips with a maximum capacity of 1,000 µL. If using them with a tip of a different size, test the fit before sampling.

Removes Particle Size Down To, μm	For Max. Pipette Tip Cap., µL	Material	Lg.	Overall Dia.	Features	Pkg. Qty.		Pkg.
40	1,000	Polyethylene	3/4"	1/4"	Sterile	50	6702N11	0000000
70	1,000	Polyethylene	3/4"	1/4"	Sterile	50	6702N12	000000

Sterile Tips for Repeat Dispensing Pipettors

Dispense a sample many times without refilling your pipettor. No need to autoclave these tips before first use—they’re cleaned and bagged to prevent contamination. Pair them with repeat dispensing pipettors. Like syringes, they have a piston that presses directly against the liquid inside the tip. This creates more pressure than traditional pipettors, which use air displacement, so these tips are good for dispensing thick or foamy liquids.

	Capacity					Barrel
	µL	ml	Graduations, ml	Tip Lg.	Tip Type	ID	OD	Lg.	Material	Piston Material	Color	Autoclavable	Pkg. Qty.		Pkg.
Pipette Tips



		2 to 100	0.002 to 0.1	—	0.15"	Standard	0.12"	0.94"	2 5/16"	Polypropylene	Polyester Plastic	Clear	No	100	6775N11	0000000


		10 to 500	0.01 to 0.5	0.1	0.57"	Standard	0.19"	0.95"	2 11/16"	Polypropylene	Polyethylene	Clear	No	100	6775N12	000000
		20 to 1,000	0.02 to 1	0.2	1.09"	Standard	0.27"	0.95"	3 5/16"	Polypropylene	Polyethylene	Clear	No	100	6775N13	000000
		25 to 1,250	0.025 to 1.25	0.25	1.09"	Standard	0.29"	0.95"	3 5/16"	Polypropylene	Polyethylene	Clear	No	100	6775N14	000000
		50 to 2,500	0.05 to 2.5	0.05	1.09"	Standard	0.29"	0.95"	3 5/16"	Polypropylene	Polyethylene	Clear	No	100	6775N15	000000
		100 to 5,000	0.1 to 5	1	1.78"	Standard	0.52"	0.95"	4"	Polypropylene	Polyethylene	Clear	No	100	6775N16	000000
		200 to 10,000	0.2 to 10	2	1.8"	Standard	0.7"	0.95"	4 3/8"	Polypropylene	Polyethylene	Clear	No	100	6775N17	000000
		250 to 12,500	0.25 to 12.5	2.5	1.8"	Standard	0.77"	0.95"	4 3/8"	Polypropylene	Polyethylene	Clear	No	100	6775N18	000000
		500 to 25,000	0.5 to 25	5	1.69"	Standard	1.08"	2.01"	4 3/16"	Polypropylene	Polyethylene	Clear	No	25	6775N19	00000
		1,000 to 50,000	1 to 50	10	1.69"	Standard	1.48"	2.01"	4 5/16"	Polypropylene	Polyethylene	Clear	No	25	6775N21	00000

Tips for Repeat Dispensing Pipettors

Dispense a sample many times without refilling your pipettor. These tips are designed for use with repeat dispensing pipettors. Like syringes, they have a piston that presses directly against the liquid inside the tip. This creates more pressure than traditional pipettors, which use air displacement, so these tips are good for dispensing thick or foamy liquids.

Capacity					Barrel
µL	ml	Graduations, ml	Tip Lg.	Tip Type	ID	OD	Lg.	Material	Piston Material	Color	Autoclavable	Pkg. Qty.		Pkg.



	2 to 100	0.002 to 0.1	—	0.15"	Standard	0.12"	0.94"	2 5/16"	Polypropylene	Polyester Plastic	Clear	No	100	6814N11	0000000


	10 to 500	0.01 to 0.5	0.1	0.57"	Standard	0.19"	0.95"	2 11/16"	Polypropylene	Polyethylene	Clear	No	100	6814N12	000000
	20 to 1,000	0.02 to 1	0.2	1.09"	Standard	0.27"	0.95"	3 5/16"	Polypropylene	Polyethylene	Clear	No	100	6814N13	000000
	25 to 1,250	0.025 to 1.25	0.25	1.09"	Standard	0.29"	0.95"	3 5/16"	Polypropylene	Polyethylene	Clear	No	100	6814N14	000000
	50 to 2,500	0.05 to 2.5	0.5	1.09"	Standard	0.29"	0.95"	3 5/16"	Polypropylene	Polyethylene	Clear	No	100	6814N15	000000
	100 to 5,000	0.1 to 5	1	1.78"	Standard	0.52"	0.95"	4"	Polypropylene	Polyethylene	Clear	No	100	6814N16	000000
	200 to 10,000	0.2 to 10	2	1.8"	Standard	0.7"	0.95"	4 3/8"	Polypropylene	Polyethylene	Clear	No	100	6814N17	000000
	250 to 12,500	0.25 to 12.5	2.5	1.8"	Standard	0.77"	0.95"	4 3/8"	Polypropylene	Polyethylene	Clear	No	100	6814N18	000000
	500 to 25,000	0.5 to 25	5	1.69"	Standard	1.08"	2.01"	4 3/16"	Polypropylene	Polyethylene	Clear	No	50	6814N19	00000
	1,000 to 50,000	1 to 50	10	1.69"	Standard	1.48"	2.01"	4 5/16"	Polypropylene	Polyethylene	Clear	No	25	6814N21	00000

Universal-Fit Pipette Tips


Pipette Tip	Rack

Attach these tips to the end of your pipettor to transfer small amounts of liquid. Choose tips that match the capacity range of your pipettor. You can autoclave them before use, but you should dispose of them after use.

Rack—Racked pipette tips come set upright in a storage box, so they’re ready to attach to your pipettor with one hand.

Capacity							Rack			Bag
µL	ml	Lg.	Tip Type	Material	Color	Autoclavable	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.



	0.1 to 10	0.0001 to 0.01	1 1/4"	Standard	Polypropylene	Clear	Yes	96	7061N22	00000	—	———	0


	0.1 to 10	0.0001 to 0.01	1 3/4"	Standard	Polypropylene	Clear	Yes	96	7061N23	0000	—	———	0
	0.1 to 20	0.0001 to 0.02	1 3/4"	Standard	Polypropylene	Clear	Yes	96	7061N24	0000	—	———	0
	0.5 to 20	0.0005 to 0.02	1 3/4"	Standard	Polypropylene	Clear	Yes	96	7061N11	0000	—	———	0
	1 to 200	0.001 to 0.2	2 1/4"	Standard	Polypropylene	Clear	Yes	96	7061N25	0000	—	———	0
	1 to 300	0.001 to 0.3	2 1/4"	Standard	Polypropylene	Clear	Yes	96	7061N26	0000	—	———	0
	2 to 200	0.002 to 0.2	2"	Standard	Polypropylene	Clear	Yes	96	7061N12	0000	—	———	0
	2 to 200	0.002 to 0.2	2"	Standard	Polypropylene	Yellow	Yes	—	———	0	1,000	7061N17	000000
	50 to 1,000	0.05 to 1	2 3/4"	Standard	Polypropylene	Clear	Yes	96	7061N13	0000	—	———	0
	50 to 1,000	0.05 to 1	2 3/4"	Standard	Polypropylene	Blue	Yes	—	———	0	1,000	7061N18	00000
	100 to 1,250	0.1 to 1.25	3 1/4"	Standard	Polypropylene	Clear	Yes	96	7061N27	0000	—	———	0


	500 to 5,000	0.5 to 5	6 1/4"	Standard	Polypropylene	Clear	Yes	28	7061N14	00000	200	7061N19	00000
	1,000 to 10,000	1 to 10	6 1/4"	Standard	Polypropylene	Clear	Yes	—	———	0	100	7061N21	00000

Sterile Universal-Fit Pipette Tips

Rack


Standard Tip	Standard Tip with Polyethylene Filter	Standard Tip with Polypropylene Filter	Wide Tip with Polyethylene Filter

Ready to use, these tips don’t need to be autoclaved before you push them onto the end of your pipettor. They come cleaned and bagged to prevent contamination. Choose tips that match the capacity range of your pipettor. They should be disposed of after use.

Pipette Tips with Liquid-Resistant Coating—Tips with a liquid-resistant coating make sure as little of your sample as possible sticks to them. The coating repels water, and the surfaces are free of grooves, rough spots, and other imperfections that could trap your sample.

Rack—Racked pipette tips come set upright in a storage box, so they’re ready to attach to your pipettor with one hand.

Wide Tip—Wide tips work well with paste, gels, syrups, and other thick liquids that are difficult to pipette.

Polyethylene Filter and Polypropylene Filter—Tips with a filter protect your pipettor from contamination if your sample creates aerosols or splashes. They also prevent damage to your pipettor’s seal from harmful acids and corrosive solutions.

	Capacity								Rack			Bag
	µL	ml	Lg.	Tip Type	Material	Filter Material	Color	Autoclavable	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
Pipette Tips



		0.1 to 1	0.0001 to 0.001	1 1/2"	Standard	Polypropylene	Polyethylene	Clear	Yes	96	6818N16	000000	—	———	0


		0.5 to 10	0.0005 to 0.01	1 3/4"	Standard	Polypropylene	Polyethylene	Clear	Yes	96	6818N17	0000	—	———	0
		0.5 to 20	0.0005 to 0.02	1 3/4"	Standard	Polypropylene	—	Clear	Yes	96	6818N13	0000	—	———	0
		1 to 20	0.001 to 0.02	2"	Standard	Polypropylene	Polyethylene	Clear	Yes	96	6818N18	0000	—	———	0
		2 to 200	0.002 to 0.2	2"	Standard	Polypropylene	—	Clear	Yes	96	6818N14	0000	—	———	0
		5 to 200	0.005 to 0.2	2"	Standard	Polypropylene	Polyethylene	Clear	Yes	96	6818N19	0000	—	———	0
		20 to 200	0.02 to 0.2	2"	Wide	Polypropylene	Polyethylene	Clear	No	96	6818N11	00000	—	———	0
		50 to 1,000	0.05 to 1	2 3/4"	Standard	Polypropylene	—	Clear	Yes	96	6818N15	0000	—	———	0
		50 to 1,000	0.05 to 1	2 3/4"	Standard	Polypropylene	Polyethylene	Clear	Yes	96	6818N21	0000	—	———	0


		Pipette Tips with Liquid-Resistant Coating



				0.1 to 10	0.0001 to 0.01	1 1/4"	Standard	Polypropylene	—	Clear	Yes	96	6818N22	0000	1,000	6818N35	000000


				0.1 to 10	0.0001 to 0.01	1 1/4"	Standard	Polypropylene	Polypropylene	Clear	No	96	6818N28	00000	—	———	0
				0.1 to 10	0.0001 to 0.01	1 3/4"	Standard	Polypropylene	—	Clear	Yes	96	6818N23	0000	1,000	6818N36	00000
				0.1 to 10	0.0001 to 0.01	1 3/4"	Standard	Polypropylene	Polypropylene	Clear	No	96	6818N29	00000	—	———	0
				0.1 to 20	0.0001 to 0.02	1 3/4"	Standard	Polypropylene	—	Clear	Yes	96	6818N24	0000	1,000	6818N37	00000
				1 to 100	0.001 to 0.1	2"	Standard	Polypropylene	Polypropylene	Clear	No	96	6818N31	00000	—	———	0
				1 to 200	0.001 to 0.2	2 1/4"	Standard	Polypropylene	—	Clear	Yes	96	6818N25	00000	1,000	6818N38	00000
				1 to 200	0.001 to 0.2	2 1/4"	Standard	Polypropylene	Polypropylene	Clear	No	96	6818N32	00000	—	———	0
				1 to 300	0.001 to 0.3	2 1/4"	Standard	Polypropylene	—	Clear	Yes	96	6818N26	00000	1,000	6818N39	00000
				1 to 300	0.001 to 0.3	2 1/4"	Standard	Polypropylene	Polypropylene	Clear	No	96	6818N33	00000	—	———	0
				1 to 1,000	0.001 to 1	3 1/2"	Standard	Polypropylene	Polypropylene	Clear	No	96	6818N34	00000	—	———	0


				100 to 1,250	0.1 to 1.25	3 1/4"	Standard	Polypropylene	—	Clear	Yes	96	6818N27	00000	1,000	6818N41	00000