Filter by
Projection
Mounting Plate Width
Grip Style
Mounting Plate Height
Pull Capacity
Finish
Handle Width
Mounting Screw Material
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Unthreaded Through-Hole-Mount Folding Pull Handles
 |  |
Style 1 | Style 2 |
 |  |
Style 3 | Style 4 |
Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. When not in use, the grip folds out of the way.
Rectangular Grip—Rectangular grips have a flat surface that keeps your hand from slipping, but may be less comfortable than round and oval grips.
Round Grip—Round grips allow your hand to pivot in any direction.
Plastic—Plastic handles are a lightweight alternative to metal. They resist oil, grease, and solvents.
Plastic-Coated Steel and Zinc-Plated Steel—Steel handles are plated or coated for rust resistance.
Mounting Hole | Grip | Temp., ° F | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Folding Angle | No. of | Ctr.-to-Ctr. Wd. | Ctr.-to-Ctr. Ht. | Wd. | Dia. | Ht. | Thk. | Projection | Pull Cap. | Mounting Screw Size | Mounting Fasteners Included | Min. | Max. | Each | |||
Style 1—Round Grip | |||||||||||||||||
Zinc-Plated Steel—Dull | |||||||||||||||||
| 180° | 4 | 5 3/4" | 1" | 7 1/4" | 9/16" | — | — | 2" | Not Rated | No. 8 | No | — | — | 11905A12 | 00000 | ||
Black Plastic-Coated Steel—Dull | |||||||||||||||||
| 180° | 4 | 5 3/4" | 1" | 7" | 9/16" | — | — | 1 15/16" | Not Rated | No. 8 | No | Not Rated | Not Rated | 11905A14 | 0000 | ||
Style 2—Rectangular Grip | |||||||||||||||||
Black Plastic-Coated Steel—Dull | |||||||||||||||||
| 180° | 4 | 5 3/4" | — | — | — | 13/16" | 1 3/16" | 2 7/8" | Not Rated | No. 6 | No | Not Rated | Not Rated | 12535A25 | 00000 | ||
Black Plastic | |||||||||||||||||
| 180° | 4 | 5 3/4" | — | — | — | 9/16" | 15/16" | 2 13/16" | Not Rated | No. 6 | No | 40 | 80 | 12535A17 | 0000 | ||
Style 3—Rectangular Grip | |||||||||||||||||
Black Plastic | |||||||||||||||||
| 180° | 2 | 2 3/8" | — | 5 3/4" | — | 3/4" | 1/2" | 2 3/8" | Not Rated | No. 6 | No | 40 | 80 | 12535A29 | 0000 | ||
Style 4—Rectangular Grip | |||||||||||||||||
Black Plastic | |||||||||||||||||
| 180° | 4 | 4 1/8" | 1" | 6" | — | 5/8" | 15/16" | 2 3/8" | Not Rated | No. 6 | No | 40 | 80 | 11905A21 | 0000 | ||
Unthreaded Through-Hole-Mount Folding Pull Handles with Mounting Plate
 |  |  |
Style 1 | Style 2 | Style 3 |
 |  | |
Style 4 | Style 5 (Shown with Rubber Grip) |
Fasten these handles directly to the front of your surface to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. Their grip folds out of the way when it's not in use.
Rectangular Grip—Rectangular grips have a flat surface that keeps your hand from slipping, but may be less comfortable than round grips.
Round Grip—Round grips allow your hand to pivot in any direction.
300 Series Stainless Steel and 304 Stainless Steel—Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
Anodized Aluminum—Aluminum handle has mild corrosion resistance, is lightweight, and is nonmagnetic.
Black-Oxide Steel, Nickel-Plated Steel, and Zinc-Plated Steel—Nickel-plated, zinc-plated, and black-oxide steel handles resist rust.
Grip | Mounting Screw | Mounting Plate | Temp., ° F | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Folding Angle | No. of Mounting Holes | Dia. | Ht. | Thk. | Handle Wd. | Projection | Pull Cap., lbf | Size | Lg. | Ht. | Wd. | Thk. | Mounting Fasteners Included | Min. | Max. | Each | |||
Style 1—Round Grip | |||||||||||||||||||
304 Stainless Steel—Dull | |||||||||||||||||||
| 90° | 4 | 5/16" | — | — | 3 3/8" | 2" | 325 | No. 10 | — | 1 3/4" | 3 3/8" | 1/16" | No | — | — | 1647A113 | 000000 | ||
Steel—Dull | |||||||||||||||||||
| 90° | 4 | 5/16" | — | — | 3 3/8" | 2" | 325 | No. 10 | — | 1 3/4" | 3 3/8" | 1/16" | No | — | — | 1647A111 | 0000 | ||
Nickel-Plated Steel—Dull | |||||||||||||||||||
| 90° | 4 | 5/16" | — | — | 3 3/8" | 2" | 325 | No. 10 | — | 1 3/4" | 3 3/8" | 1/16" | No | — | — | 1647A112 | 0000 | ||
| 90° | 4 | 5/16" | — | — | 3 7/8" | 3" | Not Rated | No. 10 | — | 2 7/8" | 3 3/8" | 1/16" | No | — | — | 15265A81 | 0000 | ||
Zinc-Plated Steel—Polished | |||||||||||||||||||
| 90° | 4 | 5/16" | — | — | 3 1/2" | 2 1/8" | Not Rated | No. 10 | — | 1 3/4" | 3 3/8" | 1/16" | No | — | — | 1647A42 | 0000 | ||
Black-Oxide Steel—Dull | |||||||||||||||||||
| 90° | 4 | 5/16" | — | — | 3 1/2" | 2 1/8" | 400 | No. 10, No. 8 | — | 1 3/4" | 3 3/8" | 1/16" | No | — | — | 1647A41 | 0000 | ||
Style 2—Round Grip | |||||||||||||||||||
Steel—Dull | |||||||||||||||||||
| 90° | 4 | 5/16" | — | — | 3 3/8" | 2 1/2" | 325 | No. 10 | — | 2 7/8" | 3 3/8" | 1/16" | No | — | — | 1647A114 | 0000 | ||
Nickel-Plated Steel—Dull | |||||||||||||||||||
| 90° | 4 | 5/16" | — | — | 3 3/8" | 2 1/2" | 325 | No. 10 | — | 2 7/8" | 3 3/8" | 1/16" | No | — | — | 1647A115 | 0000 | ||
Zinc-Plated Steel—Polished | |||||||||||||||||||
| 90° | 3 | 1/4" | — | — | 3 5/16" | 1 7/8" | 200 | No. 6 | 7/8" | 2 3/4" | 2 3/4" | 1/16" | Yes | — | — | 1647A31 | 0000 | ||
| 90° | 4 | 3/8" | — | — | 4 1/8" | 2 11/16" | 180 | No. 10 | 3/4" | 2 7/8" | 4" | 1/16" | Yes | — | — | 1647A35 | 0000 | ||
| 90° | 4 | 3/8" | — | — | 4 1/4" | 2 1/8" | 200 | No. 10 | 3/4" | 3 1/2" | 3 1/2" | 1/16" | Yes | — | — | 1647A34 | 0000 | ||
| 90° | 5 | 7/16" | — | — | 4 1/2" | 3 1/8" | 175 | No. 12 | 1 1/2" | 4 1/4" | 4 13/16" | 1/16" | Yes | — | — | 1647A36 | 00000 | ||
Black-Oxide Steel—Dull | |||||||||||||||||||
| 90° | 4 | 5/16" | — | — | 3 1/2" | 2 1/4" | Not Rated | No. 10 | — | 2 7/8" | 3 3/8" | 1/16" | No | — | — | 1647A14 | 0000 | ||
Style 3—Rectangular Grip | |||||||||||||||||||
Nickel-Plated Steel—Dull | |||||||||||||||||||
| 90° | 4 | — | 1/4" | 1/4" | 4" | 1 3/4" | Not Rated | No. 8 | — | 1 3/4" | 4 1/2" | 1/16" | No | — | — | 15675A51 | 0000 | ||
Style 4—Rectangular Grip | |||||||||||||||||||
Black Anodized Aluminum—Dull | |||||||||||||||||||
| 180° | 6 | — | 11/16" | 5/16" | 4 5/8" | 2 5/8" | 50 | No. 6 | — | 1 1/4" | 4 1/8" | 1/16" | No | — | — | 11895A11 | 00000 | ||
Style 5—Round Grip | |||||||||||||||||||
300 Series Stainless Steel with Rubber Grip—Dull | |||||||||||||||||||
| 90° | 5 | 9/16" | — | — | 4 1/2" | 2 7/16" | 350 | No. 10 | — | 2 3/4" | 4 3/4" | 1/16" | No | -40 | 240 | 1856A65 | 00000 | ||
304 Stainless Steel—Dull | |||||||||||||||||||
| 90° | 5 | 5/16" | — | — | 4 1/2" | 3 3/16" | 350 | No. 10 | — | 2 3/4" | 4 3/4" | 1/16" | No | -40 | 240 | 1856A63 | 00000 | ||
Threaded-Hole-Mount Recessed Folding Pull Handles with Mounting Plate
 |  |
Chrome-Plated Zinc | 316 Stainless Steel |
Thread screws through holes from the back of your surface into the handle to install. This handle fits into a cutout, so it's flush with the mounting surface. Its grip drops out of the way when you let go. When not in use, the spring-loaded hinge keeps the grip flush with the mounting plate and prevents rattling. Use this handle to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. Its rectangular grip has a flat surface that keeps your hand from slipping.
Chrome-Plated Zinc Alloy—Chrome-plated zinc alloy handles have good corrosion resistance.
316 Stainless Steel—316 stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
Grip | For Panel Cutout | Mounting Screw | Mounting Plate | Temp., ° F | Each | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Folding Angle | No. of Mounting Holes | Ht. | Thk. | Handle Wd. | Projection | Back Projection | Ht. | Wd. | Pull Cap. | Size | Lg., mm | Ht. | Wd. | Thk. | Mounting Fasteners Included | Min. | Max. | 1-19 | 20-Up | |||
Rectangular Grip with Spring-Loaded Hinge | ||||||||||||||||||||||
Chrome-Plated Zinc Alloy with Rubber Grip—Polished | ||||||||||||||||||||||
| 90° | 4 | 11/16" | 9/16" | 3 3/4" | 1 13/16" | 11/16" | 3" | 5 5/16" | Not Rated | M5 × 0.8 mm | 8 | 3 3/16" | 5 9/16" | 5/32" | Yes | -10 | 200 | 10815A42 | 0000000 | 0000000 | ||
316 Stainless Steel with Stainless Steel Grip—Polished | ||||||||||||||||||||||
| 90° | 4 | 1/2" | 5/8" | 4 3/16" | 3 3/8" | 15/16" | 3 1/4" | 5 3/4" | Not Rated | M5 × 0.8 mm | 12 | 3 13/16" | 5 15/16" | 5/16" | Yes | Not Rated | Not Rated | 10815A43 | 000000 | 000000 | ||
Spring-Loaded Unthreaded Through-Hole-Mount Folding Pull Handles with Mounting Plate
 |  |
Style 1 | Style 2 |
 |  |
Style 3 (Shown with Rubber Grip) | Style 4 |
When not in use, the spring in these handles keeps the folding grip flush with the mounting plate and prevents rattling. Fasten the handles directly to the front of your surface to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. All have round grips that allow your hand to pivot in any direction.
Style 4—Style 4 handles fit into a cutout, so they're flush with the mounting surface.
300 Series Stainless Steel and 304 Stainless Steel—Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.
Painted Steel and Zinc-Plated Steel—Steel handles are painted or plated for rust resistance.
Mounting Plate | Temp., ° F | Each | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Folding Angle | No. of Mounting Holes | Grip Dia. | Handle Wd. | Projection | Back Projection | Pull Cap., lbf | Mounting Screw Size | Ht. | Wd. | Thk. | Mounting Fasteners Included | Min. | Max. | 1-24 | 25-99 | 100-Up | |||
Style 1—Round Grip | |||||||||||||||||||
300 Series Stainless Steel with Rubber Grip—Dull | |||||||||||||||||||
| 90° | 3 | 9/16" | 4 1/2" | 2 13/16" | — | Not Rated | No. 10 | 1 1/16" | 4 3/16" | 1/16" | No | -40 | 150 | 1764A34 | 000000 | 000000 | 000000 | ||
Black Painted Steel with Rubber Grip—Dull | |||||||||||||||||||
| 90° | 3 | 9/16" | 4 1/2" | 2 13/16" | — | Not Rated | No. 10 | 1 1/16" | 4 3/16" | 1/16" | No | -40 | 150 | 1764A35 | 0000 | 0000 | 0000 | ||
Zinc-Plated Steel with Rubber Grip—Polished | |||||||||||||||||||
| 90° | 3 | 3/4" | 4 1/2" | 3 1/8" | — | Not Rated | No. 10 | 1 3/16" | 5 1/8" | 1/16" | No | -40 | 150 | 1764A31 | 0000 | 0000 | 0000 | ||
Style 2—Round Grip | |||||||||||||||||||
Zinc-Plated Steel with Rubber Grip—Dull | |||||||||||||||||||
| 90° | 5 | 3/4" | 4 7/8" | 3 5/8" | — | Not Rated | No. 8 | 1 5/8" | 5 5/8" | 1/16" | No | -40 | 240 | 1764A33 | 00000 | 00000 | 00000 | ||
Style 3—Round Grip | |||||||||||||||||||
300 Series Stainless Steel—Dull | |||||||||||||||||||
| 90° | 5 | 5/16" | 4 1/2" | 2 5/8" | — | Not Rated | No. 10 | 2 3/4" | 4 3/4" | 1/16" | No | -40 | 240 | 1856A71 | 00000 | 00000 | 00000 | ||
300 Series Stainless Steel with Rubber Grip—Dull | |||||||||||||||||||
| 90° | 5 | 9/16" | 4 1/2" | 3 3/8" | — | Not Rated | No. 10 | 2 3/4" | 4 3/4" | 1/16" | No | -40 | 240 | 1856A73 | 00000 | 00000 | 00000 | ||
304 Stainless Steel with Plastic Grip—Dull | |||||||||||||||||||
| 90° | 5 | 13/16" | 4 3/4" | 3 3/8" | — | 495 | No. 10 | 2 3/8" | 4 9/16" | 1/16" | No | 15 | 210 | 1885A14 | 00000 | 00000 | 00000 | ||
Zinc-Plated Steel with Plastic Grip—Dull | |||||||||||||||||||
| 90° | 5 | 13/16" | 4 3/4" | 3 3/8" | — | 495 | No. 10 | 2 3/8" | 4 9/16" | 1/16" | No | 15 | 210 | 1885A13 | 00000 | 00000 | 00000 | ||
| 90° | 6 | 13/16" | 7 5/8" | 4 15/16" | — | 220 | No. 10 | 2 3/8" | 7 1/2" | 1/16" | No | 15 | 210 | 1885A15 | 00000 | 00000 | 00000 | ||
Zinc-Plated Steel with Rubber Grip—Dull | |||||||||||||||||||
| 90° | 5 | 9/16" | 4 1/2" | 3 1/16" | — | Not Rated | No. 10 | 2 3/4" | 4 3/4" | 1/16" | No | -40 | 240 | 1764A25 | 00000 | 00000 | 00000 | ||
Style 4—Round Grip | |||||||||||||||||||
304 Stainless Steel with Plastic Grip—Dull | |||||||||||||||||||
| 90° | 8 | 5/8" | 3 3/4" | 2 11/16" | 3/8" | 165 | No. 10 | 4 1/2" | 6" | 1/16" | No | 15 | 210 | 1881A13 | 00000 | 00000 | 00000 | ||
Zinc-Plated Steel with Plastic Grip—Dull | |||||||||||||||||||
| 90° | 8 | 5/8" | 3 3/4" | 2 3/4" | 3/8" | 85 | No. 10 | 4 1/2" | 6" | 1/16" | No | 15 | 210 | 1881A11 | 00000 | 00000 | 00000 | ||
| 90° | 12 | 13/16" | 4 3/4" | 3 3/8" | 9/16" | 330 | No. 10 | 5" | 7 1/8" | 1/16" | No | 15 | 210 | 1881A12 | 00000 | 00000 | 00000 | ||
Stay-Put Threaded-Stud-Mount Folding Pull Handles
 |
Folding Angle | Mounting Stud Ctr.-to-Ctr. Wd. | Thread Size | Stud Lg. | Grip Dia. | Projection | Pull Cap. | Mounting Fasteners Included | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Round Grip with Two Detents | |||||||||||
303 Stainless Steel—Dull | |||||||||||
| 90° | 3" | 3/8"-24 | 5/8" | 5/16" | 1 9/16" | Not Rated | Yes | 1327A16 | 000000 | ||
| 90° | 4" | 3/8"-24 | 5/8" | 5/16" | 1 9/16" | Not Rated | Yes | 1327A17 | 00000 | ||
| 90° | 5" | 3/8"-24 | 5/8" | 5/16" | 1 9/16" | Not Rated | Yes | 1327A18 | 00000 | ||
| 90° | 6" | 3/8"-24 | 5/8" | 5/16" | 1 9/16" | Not Rated | Yes | 1327A19 | 00000 | ||
Anodized Aluminum—Dull | |||||||||||
| 90° | 3" | 3/8"-24 | 5/8" | 5/16" | 1 9/16" | Not Rated | Yes | 1327A12 | 00000 | ||
| 90° | 4" | 3/8"-24 | 5/8" | 5/16" | 1 9/16" | Not Rated | Yes | 1327A13 | 00000 | ||
| 90° | 5" | 3/8"-24 | 5/8" | 5/16" | 1 9/16" | Not Rated | Yes | 1327A14 | 00000 | ||
| 90° | 6" | 3/8"-24 | 5/8" | 5/16" | 1 9/16" | Not Rated | Yes | 1327A15 | 00000 | ||
Round Grip with Three Detents | |||||||||||
303 Stainless Steel—Dull | |||||||||||
| 180° | 3" | 3/8"-24 | 5/8" | 5/16" | 1 9/16" | Not Rated | Yes | 1327A8 | 00000 | ||
| 180° | 4" | 3/8"-24 | 5/8" | 5/16" | 1 9/16" | Not Rated | Yes | 1327A9 | 00000 | ||
| 180° | 5" | 3/8"-24 | 5/8" | 5/16" | 1 9/16" | Not Rated | Yes | 1327A21 | 00000 | ||
| 180° | 6" | 3/8"-24 | 5/8" | 5/16" | 1 9/16" | Not Rated | Yes | 1327A11 | 00000 | ||
Anodized Aluminum—Dull | |||||||||||
| 180° | 3" | 3/8"-24 | 5/8" | 5/16" | 1 9/16" | Not Rated | Yes | 1327A4 | 00000 | ||
| 180° | 4" | 3/8"-24 | 5/8" | 5/16" | 1 9/16" | Not Rated | Yes | 1327A5 | 00000 | ||
| 180° | 5" | 3/8"-24 | 5/8" | 5/16" | 1 9/16" | Not Rated | Yes | 1327A6 | 00000 | ||
| 180° | 6" | 3/8"-24 | 5/8" | 5/16" | 1 9/16" | Not Rated | Yes | 1327A7 | 00000 | ||
Threaded-Hole-Mount Folding Pull Handles
 |
Thread screws through holes from the back of your surface into the handles to open and close a variety of doors and drawers on chests, crates, furniture, machines, and equipment. Detents keep these handles in the extended or folded position—they won't move until you reposition them. Made of aluminum, they have mild corrosion resistance, are lightweight, and are nonmagnetic. All have round grips that allow your hand to pivot in any direction.
Mounting Hole | Thread | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Folding Angle | No. of | Ctr.-to-Ctr. Wd. | Size | Dp. | Grip Dia. | Projection | Pull Cap. | Mounting Screw Lg. | Mounting Fasteners Included | Each | |||
Round Grip with Two Detents | |||||||||||||
Black Powder-Coated Aluminum—Dull | |||||||||||||
| 90° | 2 | 4" | 8-32 | 1/4" | 3/8" | 2" | Not Rated | 5/16" | Yes | 1327A1 | 000000 | ||
| 90° | 2 | 5" | 8-32 | 1/4" | 3/8" | 2" | Not Rated | 5/16" | Yes | 1327A2 | 00000 | ||
| 90° | 2 | 6" | 8-32 | 1/4" | 3/8" | 2" | Not Rated | 5/16" | Yes | 1327A3 | 00000 | ||
Unthreaded Through-Hole-Mount Recessed Folding Pull Handles with Mounting Plate
 |  |  |
Style 1 | Style 2 | Style 3 |
 |  |  |
Style 4 | Style 5 | Style 6 |
 |  |  |
Style 7 | Style 8 | Style 9 |
 | ||
Style 10 |
Grip | For Panel Cutout | Mounting Screw | Mounting Plate | Temp., ° F | Each | |||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Folding Angle | No. of Mounting Holes | Dia. | Ht. | Thk. | Handle Wd. | Projection | Back Projection | Dia. | Ht. | Wd. | Pull Cap. | Size | Lg. | Dia. | Ht. | Wd. | Thk. | Mounting Fasteners Included | Min. | Max. | 1-24 | 25-99 | 100-Up | |||
Style 1—Round Grip | ||||||||||||||||||||||||||
304 Stainless Steel—Polished | ||||||||||||||||||||||||||
| 110° | 3 | 1/4" | — | — | 1 7/8" | 1 3/16" | 3/8" | — | 2 1/4" | 2 3/8" | Not Rated | 1/4" | — | — | 5" | 3 1/2" | 3/32" | No | — | — | 1759A31 | 000000 | 000000 | 000000 | ||
Zinc-Plated Steel—Dull | ||||||||||||||||||||||||||
| 110° | 3 | 1/4" | — | — | 1 7/8" | 1 3/16" | 3/8" | — | 2 1/4" | 2 3/8" | Not Rated | 1/4" | — | — | 5" | 3 1/2" | 3/32" | No | — | — | 1759A28 | 0000 | 0000 | 0000 | ||
Style 2—Round Grip | ||||||||||||||||||||||||||
Zinc-Plated Steel—Polished | ||||||||||||||||||||||||||
| 110° | 4 | 5/16" | — | — | 1 1/2" | 2" | 7/16" | — | 2 3/4" | 2 1/4" | Not Rated | No. 7 | 3/4" | — | 3 1/2" | 3" | 1/16" | Yes | — | — | 1313A21 | 00000 | 0000 | 0000 | ||
Style 3—Oval Grip | ||||||||||||||||||||||||||
304 Stainless Steel—Polished | ||||||||||||||||||||||||||
| 90° | 4 | — | 1/8" | 3/16" | 11/16" | 1" | 7/16" | — | 1 3/8" | 1 1/16" | Not Rated | No. 6 | — | — | 1 3/4" | 1 1/2" | 1/32" | No | — | — | 12315A41 | 00000 | 00000 | 00000 | ||
| 90° | 4 | — | 1/4" | 1/4" | 1 1/16" | 1 1/2" | 7/16" | — | 1 13/16" | 1 1/2" | Not Rated | No. 8 | — | — | 2 9/16" | 2 3/16" | 1/32" | No | — | — | 12315A51 | 00000 | 00000 | 00000 | ||
Style 4—Oval Grip | ||||||||||||||||||||||||||
316 Stainless Steel—Polished | ||||||||||||||||||||||||||
| 90° | 4 | — | 1/8" | 1/8" | 3/4" | 1 1/16" | 3/8" | — | 1 3/8" | 1 1/8" | Not Rated | No. 8 | — | — | 1 15/16" | 1 9/16" | 1/8" | No | — | — | 12315A31 | 00000 | 00000 | 00000 | ||
Brass—Polished | ||||||||||||||||||||||||||
| 90° | 4 | — | 1/8" | 1/8" | 1 1/16" | 1 1/2" | 3/16" | — | 2 3/16" | 1 11/16" | Not Rated | No. 8 | — | — | 2 1/2" | 2" | 1/8" | No | — | — | 12315A67 | 00000 | 00000 | 00000 | ||
Chrome-Plated Brass—Polished | ||||||||||||||||||||||||||
| 90° | 4 | — | 1/8" | 1/8" | 3/4" | 1 1/8" | 3/8" | — | 1 3/8" | 1 5/16" | Not Rated | No. 6 | — | — | 1 7/8" | 1 9/16" | 1/8" | No | — | — | 12315A65 | 00000 | 00000 | 00000 | ||
| 90° | 4 | — | 1/8" | 1/8" | 1 1/16" | 1 1/2" | 3/16" | — | 2 1/8" | 1 11/16" | Not Rated | No. 8 | — | — | 2 1/2" | 2" | 1/8" | No | — | — | 12315A66 | 00000 | 00000 | 00000 | ||
Style 5—Rectangular Grip with Spring-Loaded Hinge | ||||||||||||||||||||||||||
304 Stainless Steel—Polished | ||||||||||||||||||||||||||
| 90° | 4 | — | 1/4" | 1/4" | 1 11/16" | 1 5/16" | 15/32" | — | 1 3/4" | 2 5/16" | Not Rated | No. 8 | — | — | 2 1/4" | 3" | 1/32" | No | — | — | 13165A31 | 00000 | 00000 | 00000 | ||
Style 6—Round Grip with Spring-Loaded Hinge | ||||||||||||||||||||||||||
Zinc-Plated Steel with Rubber Grip—Dull | ||||||||||||||||||||||||||
| 90° | 8 | 7/16" | — | — | 4 5/16" | 2 5/8" | 3/8" | — | 3 1/8" | 5 1/4" | Not Rated | No. 10 | — | — | 4" | 6 1/8" | 1/16" | No | -40 | 240 | 13195A51 | 0000 | 0000 | 0000 | ||
| 90° | 14 | 3/4" | — | — | 4 3/4" | 3" | 5/8" | — | 3 3/4" | 5 3/4" | Not Rated | No. 10 | — | — | 5" | 7" | 1/16" | No | -40 | 240 | 13195A65 | 00000 | 00000 | 00000 | ||
Black Epoxy-Coated Steel with Rubber Grip—Dull | ||||||||||||||||||||||||||
| 90° | 14 | 3/4" | — | — | 4 3/4" | 3" | 5/8" | — | 3 3/4" | 5 3/4" | Not Rated | No. 10 | — | — | 5" | 7" | 1/16" | No | -40 | 240 | 13195A63 | 00000 | 00000 | 00000 | ||
Style 7—Round Grip | ||||||||||||||||||||||||||
Zinc-Plated Steel—Dull | ||||||||||||||||||||||||||
| 150° | 2 | 1/4" | — | — | 1 1/4" | 1 7/8" | 1/4" | 3" | — | — | Not Rated | 1/4" | — | 3 1/2" | — | — | 1/16" | No | — | — | 1759A32 | 0000 | 0000 | 0000 | ||
Style 8—Rectangular Grip | ||||||||||||||||||||||||||
Chrome-Plated Brass—Polished | ||||||||||||||||||||||||||
| 90° | 4 | — | 5/16" | 5/16" | 1 11/16" | 1 3/16" | 5/16" | — | 1 3/4" | 2 7/16" | Not Rated | No. 8 | — | — | 2 3/16" | 2 15/16" | 1/16" | No | — | — | 12315A61 | 00000 | 00000 | 00000 | ||
Style 9—Oval Grip | ||||||||||||||||||||||||||
316 Stainless Steel—Polished | ||||||||||||||||||||||||||
| 90° | 4 | — | 1/4" | 1/4" | 2 3/8" | 1 1/4" | 1/4" | — | 1 3/4" | 2 5/8" | Not Rated | No. 8 | — | — | 2 1/8" | 3" | 1/16" | No | — | — | 12315A64 | 00000 | 00000 | 00000 | ||
Style 10—Oval Grip | ||||||||||||||||||||||||||
Brass—Polished | ||||||||||||||||||||||||||
| 90° | 3 | — | 1/8" | 1/8" | 3/4" | 1 1/16" | 3/8" | — | 1 3/8" | 1 1/4" | Not Rated | No. 6 | — | 2" | — | — | 1/16" | No | — | — | 12315A72 | 00000 | 00000 | 00000 | ||
| 90° | 3 | — | 1/8" | 3/16" | 9/16" | 1 1/16" | 3/8" | — | 1 5/16" | 1 1/8" | Not Rated | No. 6 | — | 1 5/8" | — | — | 1/16" | No | — | — | 12315A69 | 0000 | 0000 | 0000 | ||
Chrome-Plated Brass—Polished | ||||||||||||||||||||||||||
| 90° | 3 | — | 1/8" | 1/8" | 3/4" | 1 1/16" | 3/8" | — | 1 3/8" | 1 1/4" | Not Rated | No. 6 | — | 2" | — | — | 1/16" | No | — | — | 12315A71 | 00000 | 00000 | 00000 | ||
| 90° | 3 | — | 1/8" | 3/16" | 9/16" | 1 1/16" | 3/8" | — | 1 5/16" | 1 1/8" | Not Rated | No. 6 | — | 1 5/8" | — | — | 1/16" | No | — | — | 12315A68 | 0000 | 0000 | 0000 | ||
Threaded-Stud-Mount Folding Pull Handles
 |
Folding Angle | Mounting Stud Ctr.-to-Ctr. Wd. | Thread Size | Stud Lg. | Grip Dia. | Projection | Pull Cap. | Mounting Fasteners Included | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
Round Grip | |||||||||||
Stainless Steel—Dull | |||||||||||
| 90° | 3" | 5/16"-24 | 9/16" | 1/4" | 1 7/16" | Not Rated | Yes | 5045N111 | 000000 | ||
| 90° | 4" | 5/16"-24 | 9/16" | 1/4" | 1 7/16" | Not Rated | Yes | 5045N112 | 00000 | ||
| 90° | 5" | 5/16"-24 | 9/16" | 1/4" | 1 7/16" | Not Rated | Yes | 5045N113 | 00000 | ||
| 90° | 6" | 5/16"-24 | 9/16" | 1/4" | 1 7/16" | Not Rated | Yes | 5045N114 | 00000 | ||
Black Anodized Aluminum—Dull | |||||||||||
| 90° | 3" | 5/16"-24 | 9/16" | 1/4" | 1 7/16" | Not Rated | Yes | 1948A111 | 00000 | ||
| 90° | 4" | 5/16"-24 | 3/8" | 5/16" | 1 7/8" | Not Rated | Yes | 1948A4 | 00000 | ||
| 90° | 5" | 5/16"-24 | 3/8" | 5/16" | 1 7/8" | Not Rated | Yes | 1948A5 | 00000 | ||
| 90° | 6" | 5/16"-24 | 3/8" | 5/16" | 1 7/8" | Not Rated | Yes | 1948A6 | 00000 | ||
