The long-lasting diamond abrasive is already embedded in these bobs so you don’t need messy compounds. Polish small areas and hard-to-reach spots using a drill or grinder for bits and burs. Grit is approximate.

For technical drawings and 3-D models, click on a part number.

A long-lasting diamond abrasive is embedded in balls at the ends of flexible spindles that press against the inside of a cylinder to remove material and leave a smooth, even finish. These hones are slightly oversized to maximize contact with the work surface. When your cylinder ID falls between two sizes, order the larger hone. Use with portable drills, drill presses, and CNC machines. Hones should be rotating when inserted into or removed from cylinders. We recommend using them with honing oil to keep the abrasive surface clean.

Abrasive material is identified by the color on the stem.

Grit is approximate and identified by the color on the hone tip.

Also Available: Hones made of boron carbide, alumina zirconia, levigated alumina, ceramic, and cubic boron nitride. Please order 4424A999 and specify abrasive, cylinder ID, and grit. Grit availability varies by abrasive.

For technical drawings and 3-D models, click on a part number.

The segmented edge on these blades is coated with diamond grit for cutting plastic. Blades with a narrower width of cut make faster cuts with less material loss.

For technical drawings and 3-D models, click on a part number.