McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    55 Products

    Scribers with Base

    Image of Product. Front orientation. Scribers. Scribers with Base.
    Also known as surface gauges, use these to scribe lines, transfer measurements, or as height and depth gauges. They have a V-groove base that can be used on round or flat surfaces.
    Gauge pins can be pushed down for use against the edge of a surface plate or T-slot for linear work.
    Mounting
    Rod
    Base
    Tip
    Style
    Scriber
    Lg.
    Lg.
    Dia.
    Lg.
    Wd.
    Material
    Adjustment
    Method
    Mfr.
    Mfr. Model
    No.
    Each
    2 Gauge Pins
    Angled8 1/2"18"3/8"3 3/4"3 3/8"Cast IronScrewStarrett57D2208A60000000
    Curved6"12"5/16"3"2 1/2"Cast IronScrewStarrett57B2208A5000000
     
    4 Gauge Pins
    Angled8 1/2"18"3/8"3 1/2"3 1/4"SteelScrewStarrett257D2208A4000000
     

    Surface Finish Gauges

    Image of Product. Front orientation. Surface Finish Gauges. Surface Finish Gauges, 22 Swatches.
    Image of Product. Front orientation. Surface Finish Gauges. Surface Finish Gauges, 30 Swatches.

    22 Swatches

    30 Swatches

    Compare your surface finish to one of the swatches on these gauges. The finishes are expressed in microinches (µ").
    30 Swatches—30-swatch gauges come with a chart to correlate the finishes with CLA and ISO N scales.
    No. of
    Swatches
    Measurement
    Unit
    For Surface Type
    Surface Finish
    Range, μin
    Lg.
    Wd.
    Material
    Specs.
    Met
    Each
    22RaGround, Lapped, Milled, Profiled, Turned2 to 5002"5 3/8"Nickel—8555T120000000
    30AA, RaGround, Lapped, Milled, Reamed, Turned2 to 5003"6"NickelASME B46.185615T1000000

    Surface Roughness Testers

    Image of Product. Front orientation. Surface Roughness Testers.
    These units test for the most popular parameters, such as Ra, Rp, and Rq. You can also set an upper and lower limit for go/no-go readings, or test for a specific standard, such as ANSI, ISO, JIS, or VDA. Testers can save up to 10 readings and can take 1,000 readings on a single charge. The touch screen makes it easy to set up and review readings. They have an RS-232C port for a direct connection to your PC.
    Use the SPC data output cable (sold separately) to connect your tester to a Mitutoyo miniprocessor.
    Cannot Be Sold To—Testers cannot be sold to the listed areas due to energy efficiency regulations.
    Computer
    Connection
    Mitutoyo
    Connection
    Lg.
    Wd.
    Ht.
    Probe Tip
    Dia.
    Type
    Gender
    Serial Port
    Interface
    Type
    Gender
    Batteries
    Included
    Includes
    Cannot Be
    Sold To
    Each
    6 1/4"2 1/2"2"0.0005"USB-CFemaleRS-23210-Pin Mitutoyo ConnectorFemaleYesBattery-Charging AC Adapter, Roughness Sample for CalibratingCalifornia1181T19000000000
    Accessories and Replacements for Surface Roughness Testers
    Each
    2" Probe Extension1181T160000000
    Vertical Use Mounting Bracket1181T1500000
    Adjustable-Height Horizontal Use Mounting Feet1181T41000000
    SPC Data Output Cable (40")20395A251000000
    Replacement Detector Probe1181T31000000
    SPC Data Output Cable (80")20395A881000000
    Height Gauge Mounting Adapter1181T42000000

    Surface Finish Gauges with Certificate of Calibration

    Image of Product. Front orientation. Contains MultipleImages. Surface Finish Gauges. Surface Finish Gauges with Certificate of Calibration.
    These gauges come with a calibration certificate traceable to NIST that states they have passed a test for accuracy. Compare your surface finish to one of the swatches on these gauges. The finishes are expressed in microinches (µ").
    No. of
    Swatches
    Measurement
    Unit
    For Surface Type
    Surface Finish
    Range, μin
    Lg.
    Wd.
    Material
    Each
    22RaGround, Lapped, Milled, Profiled, Turned2 to 5002"5 3/8"Nickel8555T160000000

    Economy Surface Finish Gauges

    Image of Product. Front orientation. Surface Finish Gauges. Economy Surface Finish Gauges.
    Compare your surface finish to one of the swatches on these gauges. The finishes are expressed in microinches (µ").
    No. of
    Swatches
    Measurement
    Unit
    For Surface Type
    Surface Finish
    Range, μin
    Lg.
    Wd.
    Material
    Each
    18AA, RaFlame Cut, Ground, Milled, Turned16 to 5005"3 1/2"Plastic1005T2000000

    Gloss Meters

    Image of Product. Front orientation. Gloss Meters.
    Confirm that each product is as shiny as the last. These meters measure the gloss of paint and coatings as well as metal, ceramic, and granite surfaces.
    Meters with a 20°, 60°, and 85° field of view are compatible with a free app that lets you use your Android device to start and stop recording and send data using Bluetooth.
    60° Field of View—Meters with a 60° field of view can evaluate the gloss of most standard, semi-gloss surfaces.
    3 ft. Long USB Cord—All meters come with a USB cord to transfer data to PCs.
    Calibration Block—These meters come with a calibration block, and you should calibrate them before each reading. Lay the block on a flat surface and press the calibration button on your meter. Position the meter on top of the block, and your meter will calibrate.
    Field of View—Meters with a 20°, 60°, and 85° field of view can evaluate low-gloss/matte and high-gloss surfaces in addition to semi-gloss surfaces—their gloss measuring range is 10 times as broad as meters with only a 60° field of view.
    Sensing
    Area, mm
    Specular Gloss Measurement
    Range, GU
    Gloss Measuring
    Increments, GU
    Accuracy
    Repeatability
    Field of
    View
    Ht.
    Wd.
    Dp.
    Lg.
    Wd.
    Data Connection
    Operating System Compatibility
    Batteries
    Included
    Battery
    Type
    Includes
    Each
    For Use On Ceramic, Metal, Paper, Plastic, Stone, and Wood
    0 to 2000.1±1.5%0.2%60°5 1/2"3"1 1/2"2010USB-CWindows 7 or LaterYesRechargeable3 ft. Long USB Cord, AC Adapter, Calibration Block, Microfiber Cloth7686N130000000
    0 to 2,0001±1.5%0.2%20°, 60°, 85°6"3"2"399Bluetooth, Mini USB-BAndroid 4.2 or Later, Windows 7 or LaterYesDisposable3 ft. Long USB Cord, Calibration Block7686N1100000000
     

    Coating-Thickness Gauge Inspection Kits

    Image of Product. Front orientation. Thickness Gauges. Coating-Thickness Gauge Inspection Kits.
    With three included probes, the gauge in these kits goes beyond a typical check for coating thickness. It also measures surface profile and environmental conditions, such as temperature. Kits include everything you need for thorough tests whether you’re inspecting a surface that’s painted, powdered, or plated. Just swap out probes to measure what you need. Use the plate and shims to practice measurements and ensure the probe is working properly. The glass plate and metal shims work with the surface profile probe. The plastic shims work with the coating thickness probe. Easy to use, the gauge’s touch screen guides you through measurements step-by-step.
    Switch between scan modes for full control over how you measure, from single-point tests to continuous readings. You can even find stats and create presets for repeated measurements. For long-term tracking, the gauge stores up to 250,000 results from multiple probes in up to 1,000 batches. See trends in real time with live graphing. To help you comply with ISO, ASTM, SSPC-PA, and IMO coating standards, set criteria for go/no-go tests.
    Thanks to a compatible app, you can add notes and images to readings or make reports on the go. For exporting into programs such as Excel or making multimedia reports in templates, use the included software.
    Choose kits based on coating and surface types.
    Built-In Probe—A built-in probe lets you use the gauge one-handed—no extended probe to maneuver.
    Removable Probe with 3 ft. Cable—A removable probe means you can measure underwater and up to 3 ft. away. The waterproof probes are at the end of sealed cable, so you can reach surfaces without submerging the gauge.
    For Nonconductive Coatings—Kits with probes for both nonconductive and nonmagnetic coatings include a thickness probe that automatically identifies the coating and surface material.
    For 0 mil to 250 mil Thick Coating—Kits with probes for 0-250 mil coating thickness are ideal for testing epoxies, flame-retardant finishes, and other thick coatings.
    For
    Coating Thk.
    For Coating Type
    US Customary,
    mil
    Metric,
    μm
    Accuracy
    Reading Storage
    Cap.
    Batteries
    Included
    Data
    Connection
    Electrical
    Connection
    Includes
    Features
    Specs. Met
    Each
    For Aluminum, Copper, Stainless Steel, Steel
     
    Built-In Probe
    Nonconductive, Nonmagnetic0 to 600 to 1,500±1%250,000YesBluetoothUSB-CCoating Thickness Probe
    Environmental Probe
    Surface Profile Probe
    Gauge Body
    Zero-Setting Glass Plate
    Plastic and Metal Shims
    Lens Shield
    Rubber Holster
    Wrist Strap
    USB Cable
    Case    		Alarm
    Batch Mode
    Limited Count Coverage Scan Mode
    Live Graphing
    Normal Scan Mode
    Statistics Scan Mode
    Zero-Position Memory (ABS)
    Zero-Set Button    		ASTM D4417, ISO 198406800N15000000000
     
    Removable Probe with 3 ft. Cable
    Nonconductive, Nonmagnetic0 to 600 to 1,500±1%250,000YesBluetoothUSB-CCoating Thickness Probe
    Environmental Probe
    Surface Profile Probe
    Gauge Body
    Zero-Setting Glass Plate
    Plastic and Metal Shims
    Lens Shield
    Rubber Holster
    Wrist Strap
    USB Cable
    Case    		Alarm
    Batch Mode
    Limited Count Coverage Scan Mode
    Live Graphing
    Normal Scan Mode
    Statistics Scan Mode
    Zero-Position Memory (ABS)
    Zero-Set Button    		ASTM D4417, ISO 198406800N1600000000
     
    For Steel
     
    Built-In Probe
    Nonmagnetic0 to 600 to 1,500±1%250,000YesBluetoothUSB-CCoating Thickness Probe
    Environmental Probe
    Surface Profile Probe
    Gauge Body
    Zero-Setting Glass Plate
    Plastic and Metal Shims
    Lens Shield
    Rubber Holster
    Wrist Strap
    USB Cable
    Case    		Alarm
    Batch Mode
    Limited Count Coverage Scan Mode
    Live Graphing
    Normal Scan Mode
    Statistics Scan Mode
    Zero-Position Memory (ABS)
    Zero-Set Button    		ASTM D4417, ISO 198406800N1100000000
    Nonmagnetic0 to 2500 to 6,000±3%250,000YesBluetoothUSB-CCoating Thickness Probe
    Environmental Probe
    Surface Profile Probe
    Gauge Body
    Zero-Setting Glass Plate
    Plastic and Metal Shims
    Lens Shield
    Rubber Holster
    Wrist Strap
    USB Cable
    Case    		Alarm
    Batch Mode
    Limited Count Coverage Scan Mode
    Live Graphing
    Normal Scan Mode
    Statistics Scan Mode
    Zero-Position Memory (ABS)
    Zero-Set Button    		ASTM D4417, ISO 198406800N1300000000
     
    Removable Probe with 3 ft. Cable
    Nonmagnetic0 to 600 to 1,500±1%250,000YesBluetoothUSB-CCoating Thickness Probe
    Environmental Probe
    Surface Profile Probe
    Gauge Body
    Zero-Setting Glass Plate
    Plastic and Metal Shims
    Lens Shield
    Rubber Holster
    Wrist Strap
    USB Cable
    Case    		Alarm
    Batch Mode
    Limited Count Coverage Scan Mode
    Live Graphing
    Normal Scan Mode
    Statistics Scan Mode
    Zero-Position Memory (ABS)
    Zero-Set Button    		ASTM D4417, ISO 198406800N1200000000
    Nonmagnetic0 to 2500 to 6,000±3%250,000YesBluetoothUSB-CCoating Thickness Probe
    Environmental Probe
    Surface Profile Probe
    Gauge Body
    Zero-Setting Glass Plate
    Plastic and Metal Shims
    Lens Shield
    Rubber Holster
    Wrist Strap
    USB Cable
    Case    		Alarm
    Batch Mode
    Limited Count Coverage Scan Mode
    Live Graphing
    Normal Scan Mode
    Statistics Scan Mode
    Zero-Position Memory (ABS)
    Zero-Set Button    		ASTM D4417, ISO 198406800N1400000000
     

    Wet-Coating-Thickness Gauges

    Image of Product. Front. Front orientation. Thickness Gauges. Wet-Coating-Thickness Gauges.
    Image of Product. Back. Back orientation. Thickness Gauges. Wet-Coating-Thickness Gauges.

    Front

    Back

    Measure the thickness of wet coatings such as paint. These gauges display readings in mils on one side and microns on the other side. For readings in mils, one mil equals 0.001".
    For Coating Thk.
    For Coating Type
    US Customary,
    mil
    Metric, μm
    Wd.
    Lg.
    Material
    Specs. Met
    Each
    For Aluminum, Copper, Plastic, Stainless Steel, Steel
    Nonconductive, Nonmagnetic1 to 11825 to 3,0002 5/8"3"Aluminum
    		ASTM D4414, ISO 28082586N1000000
     

    Vertical Benchtop Optical Comparators

    By projecting a magnified shadow or image of your part onto a screen, these optical comparators give you an easy way to measure and inspect its precise features. They work similarly to overhead projectors, but with fixed magnification to preserve proportions. Because of how easy they are to set up and use, they’re a staple in most machine shops. They shine light from above, so they’re best for inspecting flat parts, such as gaskets and O-rings. Unlike traditional optical comparators, these comparators are compact to fit easily on a benchtop.
    To use these comparators, choose profile or surface lighting. Profile lighting creates a shadow of your part, which you can use to plot points for precise measurements. To plot each point, move the stage the part rests on until the point lines up with the crosshair on the projector screen. For precision, the stage moves in increments thinner than a sheet of paper. Surface lighting makes these comparators work like an illuminated magnifier, blanketing the part with even light to reveal scratches, dents, and other surface flaws.
    Save the measurements you’ve gathered for later by exporting the data as a text file using an RS-232 cord (not included).
    Optical Comparators
    Image of Product. Front orientation. Optical Comparators. Vertical Benchtop Optical Comparators, Optical Comparators.
    Image of Specification. Numeric Display Screen. Front orientation. Contains Border. Numeric Display. Vertical Benchtop Optical Comparators.

    Numeric Display Screen

    Stage
    Stage Travel
    Distance
    Overall
    Electrical
    Magnification
    Load Cap.,
    lb.
    Lg.
    Wd.
    X
    Axis
    Y
    Axis
    Stage Travel
    Resolution
    Projector
    Screen Dia.
    Display Screen
    Type
    Ht.
    Wd.
    Dp.
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    Each
    10X87 3/4"3 3/4"6"2"0.00002"12"Numeric44"22"31"Straight Blade356378N110000000000
    Accessories for Optical Comparators
    Optical Comparator Holders
    Image of Product. Front orientation. Optical Comparator Holders.
    Holders securely hold your part as you measure.
    Max. Opening
    Wd.
    Features
    Each
    1 3/8"Clamp6378N180000000
    V-Blocks
    Image of Product. Front orientation. V-Blocks.
    V-blocks securely hold your part as you measure. V-blocks hold round parts.
    Max. Opening
    Wd.
    Features
    Each
    15/16"Clamp6378N210000000
    Optical Comparator Charts
    Image of Product. Front orientation. Optical Comparator Charts.
    Charts are clear, so you can lay them on top of your comparator’s projector screen. Charts are for checking angle measurements.
    Features
    Each
    Graduations6378N170000000
    Optical Comparator Scales
    Image of Product. Front orientation. Optical Comparator Scales.
    Scales are clear, so you can lay them on top of your comparator’s projector screen. Scales give you a way to check your comparator’s magnification and length measurements.
    Lg.,
    mm
    Features
    Each
    50Accuracy Scale, Calibration Scale6378N220000000
    300Accuracy Scale, Calibration Scale6378N2300000000
    Optical Comparator Filters
    Image of Product. Front orientation. Optical Comparator Filters.
    Filters are blue to increase contrast and reduce glare on your comparator’s projector screen.
    Color
    Each
    Blue6378N240000000
    Optical Comparator Lenses, Optical Comparator Supports and Rotary Tables
    Swivel center supports securely hold your part as you measure.
    If you need to inspect your part from different angles, use either a swivel center support or a rotary table. Swivel center supports turn around a horizontal axis, moving your part in a circle like a Ferris wheel.
    Rotary tables spin around a vertical axis, rotating your part just like a carousel.
    Each
    Lens (20X Magnification)6378N13000000000
    Lens (50X Magnification)6378N1400000000
    Lens (100X Magnification)6378N1500000000
    Swivel Center Support (3 1/2" Max. Opening Wd.)6378N1900000000
    Glass Rotary Table (3 15/16" Plate Dia.)6378N1600000000
    Optical Comparators with Edge Detection
    Image of Product. Front orientation. Optical Comparators. Vertical Benchtop Optical Comparators, Optical Comparators with Edge Detection.
    Image of Specification. Graphic Display Screen. Front orientation. Contains Border. Graphic Display. Vertical Benchtop Optical Comparators.

    Graphic Display Screen

    Optical comparators with edge detection increase accuracy and efficiency by reducing human error. No need to identify each edge yourself with the crosshair—these comparators register whether they are passing over your object's shadow or a gap, such as a hole or cutout. The graphic display screen shows a visual representation of the part you’re measuring, making it easy to identify and measure specific features. To make sure each part is inspected the same way, create a program that guides anyone using the comparator on what steps to follow.
    Stage
    Stage Travel
    Distance
    Overall
    Electrical
    Magnification
    Load Cap.,
    lb.
    Lg.
    Wd.
    X
    Axis
    Y
    Axis
    Stage Travel
    Resolution
    Projector
    Screen Dia.
    Display Screen
    Type
    Ht.
    Wd.
    Dp.
    USB
    Std.
    Connection
    No. of
    Blades
    Cord Lg.,
    ft.
    Each
    10X87 3/4"3 3/4"6"2"0.00002"12"Graphic44"22"31"2.0Straight Blade, USB-B356378N120000000000
    Accessories for Optical Comparators
    Optical Comparator Holders
    Image of Product. Front orientation. Optical Comparator Holders.
    Holders securely hold your part as you measure.
    Max. Opening
    Wd.
    Features
    Each
    1 3/8"Clamp6378N180000000
    V-Blocks
    Image of Product. Front orientation. V-Blocks.
    V-blocks securely hold your part as you measure. V-blocks hold round parts.
    Max. Opening
    Wd.
    Features
    Each
    15/16"Clamp6378N210000000
    Optical Comparator Charts
    Image of Product. Front orientation. Optical Comparator Charts.
    Charts are clear, so you can lay them on top of your comparator’s projector screen. Charts are for checking angle measurements.
    Features
    Each
    Graduations6378N170000000
    Optical Comparator Scales
    Image of Product. Front orientation. Optical Comparator Scales.
    Scales are clear, so you can lay them on top of your comparator’s projector screen. Scales give you a way to check your comparator’s magnification and length measurements.
    Lg.,
    mm
    Features
    Each
    50Accuracy Scale, Calibration Scale6378N220000000
    300Accuracy Scale, Calibration Scale6378N2300000000
    Optical Comparator Filters
    Image of Product. Front orientation. Optical Comparator Filters.
    Filters are blue to increase contrast and reduce glare on your comparator’s projector screen.
    Color
    Each
    Blue6378N240000000
    Optical Comparator Lenses, Optical Comparator Supports and Rotary Tables
    Swivel center supports securely hold your part as you measure.
    If you need to inspect your part from different angles, use either a swivel center support or a rotary table. Swivel center supports turn around a horizontal axis, moving your part in a circle like a Ferris wheel.
    Rotary tables spin around a vertical axis, rotating your part just like a carousel.
    Each
    Lens (20X Magnification)6378N13000000000
    Lens (50X Magnification)6378N1400000000
    Lens (100X Magnification)6378N1500000000
    Swivel Center Support (3 1/2" Max. Opening Wd.)6378N1900000000
    Glass Rotary Table (3 15/16" Plate Dia.)6378N1600000000

    Coating-Thickness Gauges for Hard-to-Reach Areas

    Image of Product. Front orientation. Thickness Gauges. Coating-Thickness Gauges for Hard-to-Reach Areas.
    These pen-shaped gauges are good for use on hard-to-reach surfaces. Use them to measure nonmagnetic coatings such as paint, galvanizing, plating, and enamel on steel. These gauges display readings in mils and microns. For readings in mils, one mil equals 0.001". They come with a calibration certificate traceable to NIST that states they have passed a test for accuracy.
    For
    Coating Thk.
    For Coating
    Type
    US Customary,
    mil
    Metric,
    μm
    Accuracy
    Lg.
    Dia.
    Each
    For Steel
    Nonmagnetic1/4 to 205 to 500±10%5 1/2"1/4"1374T250000000
     

    Economy Coating-Thickness Gauges for Hard-to-Reach Areas

    Image of Product. Front orientation. Thickness Gauges. Economy Coating-Thickness Gauges for Hard-to-Reach Areas.
    These pen-shaped gauges are good for use on hard-to-reach surfaces. Use them to measure nonmagnetic coatings such as paint, galvanizing, plating, and enamel on steel. These gauges display readings in mils; one mil equals 0.001".
    For Coating
    Type
    For Coating
    Thk., mil
    Accuracy
    Lg.
    Dia.
    Each
    For Steel
    Nonmagnetic1 to 15±0.2 mil5 1/4"1/2"14055T11000000
     

    Ultrasonic Painted-Surface Thickness Gauges

    Image of Product. Front orientation. Thickness Gauges. Ultrasonic Painted-Surface Thickness Gauges.
    Measure the thickness of painted metal without removing the coating. The ultrasonic probe provides highly accurate readings. These gauges come with a calibration certificate traceable to NIST that states they have passed a test for accuracy. They also include a USB cord for connecting to your PC. Use the included ultrasonic gel for maximum surface contact.
    For Material Thk.
    US Customary
    Metric, mm
    Accuracy
    Batteries
    Included
    Includes
    Features
    Specs.
    Met
    Each
    For Aluminum, Stainless Steel, Steel
    0.1" to 2 1/2"2.54 to 63.5±0.001"YesUltrasonic Gel
    USB Cord    		Built-In ProbeASTM E7978729T73000000000
     
    Accessories and Replacements for Thickness Gauges
    Replacement Ultrasonic Gel
    Container
    Size
    Each
    4 fl. oz.8729T81000000
    1 gal.8729T8200000
    Thickness Gauge Calibration Blocks
    Image of Product. Front orientation. Thickness Gauge Calibration Blocks. 4 Steps.
    Image of Product. Front orientation. Thickness Gauge Calibration Blocks. 5 Steps.

    4 Steps

    5 Steps

    Use calibration blocks to calibrate your thickness gauge. All blocks have a serial number and come with a calibration certificate traceable to NIST.
    Step
    For Aluminum
    For Steel
    For
    Stainless Steel
    No. of
    Steps
    Lg.
    Wd.
    Ht.
    Each
    Each
    Each
    43/4"3/4"1/4"8489T16100000008489T16200000008489T180000000
    53/4"3/4"0.1"8489T1710000008489T1720000008489T19000000

    Coating-Thickness Gauges

    Image of Product. Front orientation. Thickness Gauges. Coating-Thickness Gauges.
    Use these gauges to measure nonmagnetic coatings such as paint, galvanizing, plating, and enamel on steel. All come with a calibration certificate traceable to NIST that states they've passed a test for accuracy.
    Hold the probe on your material for a quick reading. These gauges display readings in mils; one mil equals 0.001". They have a wear-resistant carbide probe and a go/no-go button for rapid measurement. A V-groove in the base provides stability on curved surfaces.
    For Coating
    Type
    For Coating
    Thk., mil
    Accuracy
    Wd.
    Ht.
    Dp.
    Features
    Each
    For Steel
    Nonmagnetic0 to 8±5%8 1/2"2"1 1/4"Built-In Probe
    Go/No-Button    		1378T210000000
    Nonmagnetic0 to 80±5%8 1/2"2"1 1/4"Built-In Probe
    Go/No-Button    		1378T22000000
     

    Digital Coating-Thickness Gauges

    Image of Product. Front orientation. Thickness Gauges. Digital Coating-Thickness Gauges.
    Measure coatings such as paint, galvanizing, plating, and enamel. These gauges display readings in mils and microns; for readings in mils, one mil equals 0.001". They have a wear-resistant ruby probe.
    For
    Coating Thk.
    For Coating Type
    US Customary,
    mil
    Metric,
    μm
    Accuracy
    Wd.
    Ht.
    Dp.
    Batteries
    Included
    Features
    Each
    For Aluminum, Copper, Stainless Steel, Steel
    Nonconductive, Nonmagnetic0 to 400 to 1,000±3%1 1/2"4 1/4"1"YesBuilt-In Probe1453T490000000
     
    For Steel
    Nonmagnetic0 to 400 to 1,000±3%1 1/2"4 1/4"1"YesBuilt-In Probe1453T48000000
     

    Digital Coating-Thickness Gauges with Certificate of Calibration

    Image of Product. Front orientation. Contains Annotated. Thickness Gauges. Digital Coating-Thickness Gauges with Certificate of Calibration, Removable Probe with 3 ft. Cable.
    Image of Product. Front orientation. Contains MultipleImages. Thickness Gauges. Digital Coating-Thickness Gauges with Certificate of Calibration, Built-In Probe.

    Removable Probe

    with 3 ft. Cable

    Built-In Probe

    These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. Use them to measure coatings such as paint, galvanizing, plating, and enamel. They display readings in mils and microns; for readings in mils, one mil equals 0.001". All have a wear-resistant ruby probe.
    For
    Coating Thk.
    For Coating Type
    US Customary,
    mil
    Metric,
    μm
    Accuracy
    Wd.
    Ht.
    Dp.
    Reading Storage
    Cap.
    Batteries
    Included
    Includes
    Features
    Specs. Met
    Each
    For Aluminum, Copper, Stainless Steel, Steel
    Nonconductive, Nonmagnetic0 to 600 to 1,500±1%2 3/8"5 3/8"1 1/8"1,000Yes—Built-In Probe
    High/Low Limits    		ASTM B499, ASTM D1186, ASTM D1400, ISO 28081453T65000000000
    Nonconductive, Nonmagnetic0 to 600 to 1,500±1%2 3/8"5 3/8"1 1/8"1,000YesRemovable Probe with 3 ft. CableHigh/Low LimitsASTM B499, ASTM D1186, ASTM D1400, ISO 28081453T7300000000
     
    For Steel
    Nonmagnetic0 to 600 to 1,500±1%2 3/8"5 3/8"1 1/8"1,000Yes—Built-In Probe
    High/Low Limits    		ASTM B499, ASTM D1186, ASTM D1400, ISO 28081453T61000000
     
    back to top