UV-Resistant Surface Guards

Filter by

System of Measurement

Thickness

Mount Type

Length

Width

Material

Shape

Color

Hardness

Hardness Rating

Performance

Electrically Insulating

For Use Outdoors

Height

Profile Shape

Maximum Temperature

Flexibility

Component

Environment

Hole Diameter

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

REACH

Compliant

Not Compliant

Export Control Classification Number (ECCN)

EAR99

RoHS

Compliant

Not Compliant

DFARS Specialty Metals

Exempt

Mounting Hole Diameter

68 Products

Raised-Bulb Surface Guards


Style 1	Style 3

Style 4	Style 5

A raised profile adds cushioning to soften impact and shield walls and flat surfaces from bumps and scrapes. Originally used as rub rail for boats, these guards are made from tough, weather-resistant materials that hold up indoors or outdoors. They're often used to line loading docks, protect equipment in busy areas, or create impact-resistant barriers along workstations.

Plain Back—Install with screws, nails, or construction adhesive.

EPDM—EPDM surface guards are more abrasion resistant than vinyl plastic guards.

Vinyl Plastic—These guards resist water and common cleaning solutions so they are easy to wash down and maintain.

Extra Flexible—Bend these guards around tight curves and contours. They’re often used to protect columns and irregular equipment surfaces.

	Surface Guards																Corner Guards
										Temp., ° F		Mounting Flange
	Style	Lg., ft.	Wd.	Thk.	Nonmarking	For Use Outdoors	Hardness Rating	Hardness	Flexibility	Min.	Max.	Wd.	Thk.	Color		Each	Lg.		Each
Plain Back







				EPDM

				1	6	2 5/8"	1 1/4"	No	Yes	Hard	Durometer 70A	Extra Flexible	-30	200	5/8"	1/4"	Black	8847T16	000000	—	———	0


				1	6	3 5/8"	1 3/8"	No	Yes	Hard	Durometer 70A	Extra Flexible	-30	200	3/4"	1/4"	Black	8847T18	00000	—	———	0
				1	6	4 1/8"	1 1/2"	No	Yes	Hard	Durometer 70A	Extra Flexible	-30	200	1"	1/4"	Black	8847T19	00000	—	———	0
				1	12	2 5/8"	1 1/4"	No	Yes	Hard	Durometer 70A	Extra Flexible	-30	200	5/8"	1/4"	Black	8847T17	000000	—	———	0




						Vinyl Plastic

						3	8	3"	2"	Yes	Yes	Hard	Durometer 80A	Extra Flexible	40	110	1"	5/32"	Black	8847T511	00000	7 1/8"	1296T111	000000


						3	8	3 1/4"	3"	Yes	Yes	Hard	Durometer 80A	Extra Flexible	40	110	2"	3/16"	Black	8847T517	00000	7 1/8"	1296T111	00000
						3	8	3 5/8"	2 3/8"	Yes	Yes	Hard	Durometer 80A	Extra Flexible	40	110	1 1/4"	3/16"	Black	8847T514	00000	7 1/8"	1296T111	00000
						4	8	3 3/4"	1"	Yes	Yes	Hard	Durometer 80A	Extra Flexible	40	110	3/4"	3/16"	Black	8847T521	00000	—	———	0
						4	8	4 3/4"	1 5/16"	Yes	Yes	Hard	Durometer 80A	Extra Flexible	40	110	7/8"	1/4"	Black	8847T524	00000	—	———	0
						5	8	3 1/2"	1 3/8"	Yes	Yes	Hard	Durometer 80A	Extra Flexible	40	110	7/8"	5/32"	Black	8847T527	00000	—	———	0

Surface Guards for Corners

Style 1

Style 2

Style 4

Protect corners on equipment, walls, and docks. These guards sit at a 90° angle to shield against damage from carts, vehicles, and moving objects.

Plain Back—Install with screws, nails, or construction adhesive.

Polyurethane Foam—Designed to cushion and bounce back from impact while maintaining excellent abrasion resistance. These guards protect the surface and the object or person that makes contact.

Vinyl Plastic—These guards resist water and common cleaning solutions so they are easy to wash down and maintain.

									Temp., ° F		Mounting
	Style	Lg.	Wd.	Thk.	Nonmarking	For Use Outdoors	Hardness Rating	Hardness	Min.	Max.	No. of Holes	Hole Dia.	Fasteners Included	Flexibility	Color		Each
Screw In







				Plastic

				1	6 1/4"	2 1/2"	1 1/2"	Yes	Yes	Hard	Durometer 70A	-20	200	4	1/4"	No	Rigid	Black	46875K422	000000


				1	6 1/4"	2 1/2"	1 1/2"	Yes	Yes	Hard	Durometer 70A	-20	200	4	1/4"	No	Rigid	White	46875K421	00000




						Polyurethane Foam

						2	7"	7"	7"	Yes	Yes	Hard	Durometer 70A	-10	140	4	3/8"	No	Rigid	Black	46875K114	000000


						2	12"	4 1/4"	2 1/4"	Yes	Yes	Hard	Durometer 70A	-10	140	4	3/8"	No	Rigid	Black	46875K111	00000


						Plain Back







										Vinyl Plastic

										4	7 1/8"	3 5/8"	1 1/4"	Yes	Yes	Hard	Durometer 85A	0	120	—	—	—	Flexible	Black	1296T111	00000

UV-Resistant Slip-On Protective Feet

Great for use outdoors, these protective feet are EPDM rubber, which withstands exposure to direct sunlight. Use them to cover the bottom of furniture legs, canes, and crutches to gain traction and protect floors from scratches and wear.

Rubber Base

Image of Product. Front orientation. Protective Feet. UV-Resistant Slip-On Protective Feet.

Reinforced Bottom—Protective feet with a reinforced bottom have a metal washer in the base to prevent equipment legs from cutting through the rubber.

	Base				Unreinforced Bottom			Reinforced Bottom
For Leg OD	Dia.	Ht.	Material	Choose a Base Color	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
3/4"	1 7/32"	1 3/8"	EPDM	Black, Gray, Ivory	10	2517T61	00000	10	2517T64	00000
1"	1 9/16"	1 9/16"	EPDM	Black, Gray, Ivory	10	2517T62	0000	10	2517T65	00000
1 1/4"	1 13/16"	1 13/16"	EPDM	Black, Gray, Ivory	10	2517T63	00000	5	2517T66	0000

Flame-Retardant Heavy Duty Heat-Shrink Wrap

Protect equipment exposed to flames and sparks. This wrap is often used on shipments staged in machine shops or construction sites where sparks may fly from welding and grinding. To meet NFPA 701 standards, this wrap self-extinguishes flames. It is also treated to prevent weakening and disintegrating from UV exposure, so your equipment will remain protected outdoors for up to a year. Shrink the wrap with a heat gun to create a formfitting barrier.

Eight times thicker than standard heat-shrink wrap, you can drag and shrink this wrap over corners of equipment without it tearing. It's large enough to cover forklifts, industrial compressors, or even a boat, but it's easy enough to trim down using a utility knife. This wrap comes folded on a roll for efficient storage.

Note: One mil equals 0.001".

	Thk., mil	Lg., ft.	Roll Wd.	Dia.	Core ID	Clarity	Color	Shrink Temp., ° F	Flammability Rating		Each
LDPE



	26	9	62	55"	11"	3"	Opaque	White	275	NFPA 701	5415N11	0000000


	32	9	70	51"	11"	3"	Opaque	White	275	NFPA 701	5415N12	000000

Reinforced UV-Resistant Heavy Duty Heat-Shrink Wrap

Cover objects with sharp angles and points with this wrap to protect them from sun, dirt, moisture, and damage. Thicker and wider than standard heat-shrink wrap, it’s also woven with fibers that help it stretch over odd shapes without tearing. A UV-resistant additive shields material from sunlight for up to one year, so you can keep material outdoors for extended periods without it becoming brittle, fading, or discoloring. Heat the wrap with a heat gun to create a snug barrier. This wrap is folded on the roll, so you get a wide wrap that takes up a fraction of the storage space. Cut it to the size you need.

Note: One mil equals 0.001".

	Thk., mil	Lg., ft.	Roll Wd.	Dia.	Core ID	Clarity	Color	Reinforcement Material	Shrink Temp., ° F		Each
Polyethylene



	20	10	100	86"	9"	3"	Opaque	White	Fiber	275	5688N11	0000000


	33	10	100	86"	11"	3"	Opaque	White	Fiber	275	5688N12	000000

UV-Resistant Corrosion-Inhibiting Heavy Duty Heat-Shrink Wrap


Opaque	Clear

Shield shipments of metal equipment that could be exposed to the outdoors for long periods of time. This wrap is treated to prevent fading and degrading in the sun, while a built-in inhibitor guards the contents underneath from rain, snow, and humidity. It’s often used in place of oils and desiccants that prevent rust, so you don’t need to clean or degrease your equipment before covering it. Shrink the wrap with a heat gun to create a formfitting barrier that keeps out moisture and dirt.

At least six times thicker than standard heat-shrink wrap, you can drag and shrink this wrap over corners of equipment without it tearing. It’s large enough to cover forklifts, industrial compressors, or even a boat, but it’s easy enough to trim down using a utility knife. This wrap comes folded on a roll for efficient storage.

Note: One mil equals 0.001”.

Clear—Clear wrap makes it easy to identify and check on covered equipment. It meets ASTM standards for plastic wrap.

	Thk., mil	Lg., ft.	Roll Wd.	Dia.	Core ID	Clarity	Color	Shrink Temp., ° F	Useful Life, yr.	Specs. Met		Each
LDPE



	20	7	100	64"	9"	3"	Opaque	White	275	1	—	5674N11	0000000


	20	10	100	60"	9"	3"	Clear	Blue	260	2	ASTM D1709, ASTM D1922, ASTM D6988, ASTM D882	5404N11	000000

Stainless Steel Surface Guards

Made of sleek stainless steel, these guards stand up to frequent washdowns, cleaning agents, and heavy impact. They’re often used to protect surfaces in hospitals, laboratories, and commercial kitchens. Pair them with corner guards to create a continuous barrier.

	Nonmarking	For Use Outdoors	Flexibility		Each
Plain Back







	304 Stainless Steel

	2	4"	1/16"	Yes	Yes	Rigid	9355N11	000000


	4	4"	1/16"	Yes	Yes	Rigid	9355N12	00000
	6	4"	1/16"	Yes	Yes	Rigid	9355N13	00000
	8	4"	1/16"	Yes	Yes	Rigid	9355N14	000000
	10	4"	1/16"	Yes	Yes	Rigid	9355N15	000000

Surface Guard Accessories

	Lg.	Wd.	Thk.	Nonmarking	For Use Outdoors	Flexibility
Corner Guards





304 Stainless Steel
3"	4"	1/16"	Yes	Yes	Rigid	9355N16	000000

Vibration-Damping Bushings

Style 5

These bushings have a taller profile than vibration-damping grommets, so they can be used in thicker panels. With only one rim, they're also easier to install. They isolate vibration around motors, fans, blowers, and actuators to extend part life and minimize downtime.

Bushings with Steel Insert—These bushings have a steel insert that prevents overcompressing the rubber during installation. The insert also acts as a spacer to shield the rubber from contact with the bolt, reducing wear and extending the bushing’s life. To make these bushings fail-safe, install with a washer. If the rubber fails, the washer supports your equipment and prevents costly downtime.

Multipurpose Neoprene—Resist wear and tear well enough for most applications. They are UV resistant and won't break down when exposed to oil, grease, and gasoline, so they're a good choice for motors and pumps.

	Vibration-Damping Mounts														Washers
	Style	Dia.	Cap. per Mount, lb.	Hole Dia.	For Hole Dia.	Deflection @ Cap.	Shear Cap. per Mount, lb.	Deflection @ Shear Cap.	Temp. Range, ° F	Overall Ht.	Color	Pkg. Qty.		Pkg.		Each
Bushings with Steel Insert







				Multipurpose Neoprene

				5	1.09"	30	0.4"	0.81"	0.03"	30	0.03"	-20 to 180	0.8"	Black	1	8109N11	000000	8109N101	00000


				5	1.09"	50	0.4"	0.81"	0.03"	50	0.03"	-20 to 180	0.8"	Black	1	8109N12	00000	8109N101	0000
				5	1.09"	80	0.4"	0.81"	0.03"	80	0.03"	-20 to 180	0.8"	Black	1	8109N13	00000	8109N101	0000
				5	1.09"	140	0.4"	0.81"	0.03"	140	0.03"	-20 to 180	0.8"	Black	1	8109N14	00000	8109N101	0000

Ribbed Vibration-Damping Washers

These washers add a rubber buffer between fasteners and mounting surfaces so vibration doesn't flow through and cause damage. They're often used to mount sensors, circuit boards, and other sensitive electronic components. To absorb more vibration, stack two washers together.

	OD	Thk.	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount	Deflection @ Shear Cap.	For Screw Size	Temp. Range, ° F	Color	Pkg. Qty.		Pkg.
Multipurpose Neoprene



	0.45"	0.83"	0.25"	4	0.05"	Not Rated	Not Rated	7/16"	10 to 180	Black	5	4510N101	000000


	0.45"	0.83"	0.25"	11	0.05"	Not Rated	Not Rated	7/16"	10 to 180	Black	5	4510N102	00000
	0.45"	0.83"	0.25"	18	0.05"	Not Rated	Not Rated	7/16"	10 to 180	Black	5	4510N103	00000
	0.75"	1.37"	0.33"	22	0.07"	Not Rated	Not Rated	3/4"	10 to 180	Black	5	4510N104	00000
	0.75"	1.37"	0.33"	31	0.07"	Not Rated	Not Rated	3/4"	10 to 180	Black	5	4510N105	00000
	0.75"	1.37"	0.33"	65	0.07"	Not Rated	Not Rated	3/4"	10 to 180	Black	5	4510N106	00000
	0.75"	1.37"	0.33"	80	0.07"	Not Rated	Not Rated	3/4"	10 to 180	Black	5	4510N107	00000
	1"	1.64"	0.41"	30	0.08"	Not Rated	Not Rated	1"	10 to 180	Black	5	4510N108	00000
	1"	1.64"	0.41"	40	0.08"	Not Rated	Not Rated	1"	10 to 180	Black	5	4510N109	00000
	1"	1.64"	0.41"	60	0.08"	Not Rated	Not Rated	1"	10 to 180	Black	5	4510N11	00000
	1"	1.64"	0.41"	105	0.08"	Not Rated	Not Rated	1"	10 to 180	Black	5	4510N111	00000


	1.25"	1.91"	0.5"	35	0.1"	Not Rated	Not Rated	1 1/4"	10 to 180	Black	5	4510N112	00000
	1.25"	1.91"	0.5"	45	0.1"	Not Rated	Not Rated	1 1/4"	10 to 180	Black	5	4510N113	00000
	1.25"	1.91"	0.5"	65	0.1"	Not Rated	Not Rated	1 1/4"	10 to 180	Black	5	4510N114	00000
	1.25"	1.91"	0.5"	90	0.1"	Not Rated	Not Rated	1 1/4"	10 to 180	Black	5	4510N115	00000

Ribbed Vibration-Damping Bushings

Style 1

The ribs flex to absorb slow, rumbling vibrations better than smooth rubber bushings. Install these bushings around shafts, large fans, and other slow-rotating components to extend part life and minimize downtime. Pair a ribbed vibration-damping washer with a bushing to absorb more vibration.

	Vibration-Damping Mounts														Vibration-Damping Washers
	Style	Dia.	Cap. per Mount, lb.	Hole Dia.	For Hole Dia.	Deflection @ Cap.	Shear Cap. per Mount	For Screw Size	Temp. Range, ° F	Overall Thk.	Color	Pkg. Qty.		Pkg.	Pkg. Qty.		Pkg.
Multipurpose Neoprene



		1	0.83"	5	0.25"	0.47"	0.05"	Not Rated	1/4"	10 to 180	0.56"	Black	5	4511N101	000000	5	4510N101	000000


		1	0.83"	11	0.25"	0.47"	0.05"	Not Rated	1/4"	10 to 180	0.56"	Black	5	4511N102	00000	5	4510N102	00000
		1	0.83"	20	0.25"	0.47"	0.05"	Not Rated	1/4"	10 to 180	0.56"	Black	5	4511N103	00000	5	4510N103	00000
		1	1.37"	19	0.38"	0.69"	0.07"	Not Rated	3/8"	10 to 180	0.66"	Black	5	4511N104	00000	5	4510N104	00000
		1	1.37"	28	0.38"	0.69"	0.07"	Not Rated	3/8"	10 to 180	0.66"	Black	5	4511N105	00000	5	4510N105	00000
		1	1.37"	70	0.38"	0.69"	0.07"	Not Rated	3/8"	10 to 180	0.66"	Black	5	4511N106	00000	5	4510N106	00000
		1	1.37"	75	0.38"	0.69"	0.07"	Not Rated	3/8"	10 to 180	0.66"	Black	5	4511N107	00000	5	4510N107	00000
		1	1.64"	50	0.47"	0.92"	0.07"	Not Rated	7/16"	10 to 180	0.76"	Black	5	4511N108	00000	5	4510N108	00000
		1	1.64"	70	0.47"	0.92"	0.07"	Not Rated	7/16"	10 to 180	0.76"	Black	5	4511N109	00000	5	4510N109	00000
		1	1.64"	170	0.47"	0.92"	0.07"	Not Rated	7/16"	10 to 180	0.76"	Black	5	4511N11	00000	5	4510N11	00000
		1	1.64"	180	0.47"	0.92"	0.07"	Not Rated	7/16"	10 to 180	0.76"	Black	5	4511N111	00000	5	4510N111	00000


		1	1.91"	45	0.56"	1.16"	0.06"	Not Rated	7/16"	10 to 180	0.88"	Black	5	4511N112	00000	5	4510N112	00000
		1	1.91"	70	0.56"	1.16"	0.06"	Not Rated	7/16"	10 to 180	0.88"	Black	5	4511N113	00000	5	4510N113	00000
		1	1.91"	95	0.56"	1.16"	0.06"	Not Rated	7/16"	10 to 180	0.88"	Black	5	4511N114	00000	5	4510N114	00000
		1	1.91"	135	0.56"	1.16"	0.06"	Not Rated	7/16"	10 to 180	0.88"	Black	5	4511N115	00000	5	4510N115	00000