Use these sleeves for non-lifting applications such as tethering, securing, and suspending.

These kits include two compression sleeves paired with two thimbles. The thimbles support the wire rope loops and prevent it from fraying.

Also known as socket-end swage fittings, install these stud-end fittings with a roller swage press for a strong, permanent hold.

Also known as socket-end swage fittings, install these clevis-end fittings with a roller swage press for a strong, permanent hold.

Compress the thin shank wall with a hand tool to attach these light duty mounting-plate-end fittings. They are also known as hand swage fittings.

Compress the thin shank wall with a hand tool to attach these light duty eye-end fittings. They are also known as hand swage fittings.

Compress sleeves with less effort than standard compression tools.

Permanently mount this press on a bench top.

Using a hammer, tap these expanders into the end of a tube to allow a second piece of the same diameter to fit inside.

Designed for building and maintaining equipment with tubes that pass through perforated metal sheets, these expanders have rollers and tapered noses to ensure uniform tube tightness.

Form 45° flares in aluminum, brass, or copper tubing so it’s compatible with flared tube fittings often used in low-pressure plumbing, air conditioning, and refrigeration systems.

Double flares roll the end of tubing in on itself then flare both layers for applications such as brake lines.

Flare soft metal tubing.

Mount these flarers in a vise and create single and double 37° and 45° flares.

Form a rounded bead on the end of metal tubing to hold soft rubber hose in place.

Restore tube ends with a few light blows of a hammer.

Individual dies allow you to crimp large sizes of air and water hose from 3/4" to 1 3/8" OD.

As you squeeze the handles, the vise-like jaws lock tightly onto the ferrule to secure barbed fittings onto your hose.

Install low-profile band clamps, or fit a cutting adapter over the tool to install Extra-Strength Low-Profile Band Clamps.

With the most leverage of any of our installation tools, this tool has a ball handle that makes it easier to ratchet.

This tool is longer than the light duty tool for increased leverage.

Sets contain a crimping tool and a variety of CGA fittings, nuts, and ferrules so you can connect pressure regulators, torches, and other components of your welding system.

The tips adjust to accommodate the clamps often found on heater and radiator hoses.